The DOI matches its Crossref record.
Electric power applications of superconductivity
Abstract
The development of superconducting systems for electric power is driven by the promise of improved efficiency, smaller size, and reduced weight as compared to existing technologies and by the possibility of new applications. Superconducting power components can also contribute to improved power quality and increased system reliability. This paper addresses historical developments and technology status of four superconducting power applications: cables, superconducting magnetic energy storage (SMES), fault-current limiters, and transformers. Today, SMES is the only fully functional superconducting system and it has seen only limited use at grid power levels. A few model or demonstration units exist for each of the other three applications. Superconductivity faces several hurdles on the path to widespread use. Perhaps the most important is the need for operating voltages of 100 kV or more. Though progress in this and other areas has been rapid, considerable development is needed before superconducting devices perform reliably in the utility environment. As a result, today, most initial installations are aimed at niche applications and will be installed where space is limited, where power demands are increasing over existing corridors, and/or where initial development costs can be offset by enhanced power grid performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Luo, X., Wang, J., Dooner, M., & Clarke, J. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.09.081 · Cited by 3,869
Solar Energy Supply and Storage for the Legacy and Nonlegacy Worlds
Cook, T. R., Dogutan, D. K., Reece, S. Y., Surendranath, Y., Teets, T. S., & Nocera, D. G. (2010) · Chemical Reviews · doi:10.1021/cr100246c · Cited by 3,064
A review of energy storage technologies for wind power applications
Díaz-González, F., Sumper, A., Gomis-Bellmunt, O., & Villafáfila-Robles, R. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.029 · Cited by 1,547
Energy storage for mitigating the variability of renewable electricity sources: An updated review
Beaudin, M., Zareipour, H., Schellenberglabe, A., & Rosehart, W. (2010) · Energy for Sustainable Development · doi:10.1016/j.esd.2010.09.007 · Cited by 1,042
Characteristics of electrical energy storage technologies and their applications in buildings
Chatzivasileiadi, A., Ampatzi, E., & Knight, I. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.05.023 · Cited by 255
Metadata
- Authors
- Hassenzahl, W. V., Hazelton, D. W., Johnson, B. K., Komarek, P., Noe, M., & Reis, C. T.
- Venue
- Proceedings of the IEEE
- Published
- 2004-10
- Volume
- 92
- Issue
- 10
- Pages
- 1655-1674
- ISSN
- 0018-9219 (ISSN-L)
- OpenAlex
- W2109442702
- Cited by
- 165
- References
- 0
- FWCI
- 8.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Electric power applications of superconductivity. https://app.cochat.ai/papers/10.1109/jproc.2004.833674
- The paper
- Hassenzahl, W. V., Hazelton, D. W., Johnson, B. K., Komarek, P., Noe, M., & Reis, C. T. (2004). Electric power applications of superconductivity. Proceedings of the IEEE. https://doi.org/10.1109/jproc.2004.833674
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.