The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Fieldbus Technology in Industrial Automation
Open accessAbstract
Fieldbus technology in industrial automation is not only relatively complex because of the number of solutions possible, but also, and above all, because of the variety of applications. Ironically, these in turn are responsible for the multitude of solutions available. If the analysis of the basic needs is relatively standard, as they will always involve connecting sensors, actuators, and field controllers with each other, the options in architecture are numerous and can impose the need for certain services. The required performances themselves and the QoS expected fundamentally depend on the applications. This paper traces this technology from its beginnings, which go back to the first industrial networks in the 1970s. The principal stages of development are recounted, from the initial requirement specifications to the current state of international standardization. The diverse technical solutions are then analyzed and classified. In particular, we study the temporal aspects, the medium access control protocols, and application relationships.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Time, clocks, and the ordering of events in a distributed system
Lamport, L. (1978) · Communications of the ACM · doi:10.1145/359545.359563 · Cited by 8,488
OSI Reference Model--The ISO Model of Architecture for Open Systems Interconnection
Zimmermann, H. (1980) · IEEE Transactions on Communications · doi:10.1109/tcom.1980.1094702 · Cited by 1,528
Misconceptions about real-time computing: a serious problem for next-generation systems
Stankovic, J. A. (1988) · Computer · doi:10.1109/2.7053 · Cited by 965
Logics and models of real time: A survey
Alur, R., & Henzinger, T. A. (1992) · Lecture Notes in Computer Science · doi:10.1007/bfb0031988 · Cited by 548
Calculating controller area network (can) message response times
Tindell, K., Burns, A., & Wellings, A. J. (1995) · Control Engineering Practice · doi:10.1016/0967-0661(95)00112-8 · Cited by 420
Scheduling hard real-time systems: a review
Burns, A. (1991) · Software Engineering Journal · doi:10.1049/sej.1991.0015 · Cited by 247
Timing Constraints of Real-Time Systems: Constructs for Expressing Them, Methods of Validating Them
Dasarathy, B. (1985) · IEEE Transactions on Software Engineering · doi:10.1109/tse.1985.231845 · Cited by 239
Analysis of hard real-time communications
Tindell, K., Burns, A., & Wellings, A. J. (1995) · Real-Time Systems · doi:10.1007/bf01088855 · Cited by 207
Thomesse, J. P. (1998) · Annual Reviews in Control · doi:10.1016/s1367-5788(98)00003-0 · Cited by 85
Self-citationReal-time communications over broadcast networks : the CSMA-DCR and the DOD-CSMA-CD protocols
Lann, G. L., & Rivierre, N. (1993) · OpenGrey (Institut de l'Information Scientifique et Technique) · Cited by 63
Static and dynamic polling mechanisms for fieldbus networks
Raja, P., & Noubir, G. (1993) · ACM SIGOPS Operating Systems Review · doi:10.1145/155870.155875 · Cited by 53
The CIP family of fieldbus protocols and its newest member - Ethernet/IP
Schiffer, V. (2002) · doi:10.1109/etfa.2001.996391 · Cited by 26
Some Future Directions in Fieldbus Research and Development
Decotignie, J.-D. (1999) · Springer eBooks · doi:10.1007/978-3-7091-6421-1_40 · Cited by 13
Cited by
Recent and Emerging Topics in Wireless Industrial Communications: A Selection
Willig, A. (2008) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2008.923194 · Cited by 656
Introduction to Industrial Control Networks
Galloway, B., & Hancke, G. P. (2013) · IEEE Communications Surveys & Tutorials · doi:10.1109/surv.2012.071812.00124 · Cited by 548
Industrial Communication Systems and Their Future Challenges: Next-Generation Ethernet, IIoT, and 5G
Vitturi, S., Zunino, C., & Sauter, T. (2019) · Proceedings of the IEEE · doi:10.1109/jproc.2019.2913443 · Cited by 380
The Emergence of Industrial Control Networks for Manufacturing Control, Diagnostics, and Safety Data
Moyne, J. R., & Tilbury, D. M. (2007) · Proceedings of the IEEE · doi:10.1109/jproc.2006.887325 · Cited by 272
Cybersecurity of industrial cyber-physical systems: A review
Kayan, H., Nunes, M., Rana, O., Burnap, P., & Perera, C. (2022) · ACM Computing Surveys · doi:10.1145/3510410 · Cited by 261
Metadata
- Authors
- Thomesse, J.-P.
- Venue
- Proceedings of the IEEE
- Published
- 2005-06
- Volume
- 93
- Issue
- 6
- Pages
- 1073-1101
- ISSN
- 0018-9219 (ISSN-L)
- OpenAlex
- W2038728925
- Cited by
- 293
- References
- 13
- FWCI
- 45.20
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.