Stable Photonic Links for Frequency and Time Transfer in the Deep-Space Network and Antenna Arrays
The DOI matches its Crossref record.
Abstract
For more than two decades, NASA deep space network (DSN) frequency and timing metrology has been a driving application for remote transfer of stable radio-frequency signals over fiber-optic cables. Precise, accurate, and stable signals are essential for deep-space communication and tracking, and syntonized and synchronized reference signals from atomic clocks calibrated to coordinated universal time must often be distributed over large distances. Fiber-optic technologies developed at the jet propulsion laboratory have resulted in several operational signal transport capabilities that enable precise spacecraft navigation and sensitive radio science experiments. These techniques are now finding further applicability in metrology applications to remotely compare ultra stable microwave and optical atomic clocks and for antenna array X- and Ka-band signal transport applications where temporal phase stability and alignment are critical. The pioneering DSN photonic link developments and capabilities are summarized, and a stabilized multiphotonic link architecture for ultrastable signal transport in antenna arrays is described.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Mehlstäubler, T. E., Grosche, G., Lisdat, C., Schmidt, P. O., & Denker, H. (2018) · Reports on Progress in Physics · doi:10.1088/1361-6633/aab409 · Cited by 263
“Additionally, already from the 1980s, reference frequencies (and later time-stamps) were distributed via rf signals over a few km to several sites, in support of the deep space network, see (Calhoun et al. 2007).”
Schioppo, M., Kronjäger, J., Silva, A., Ilieva, R., Paterson, J. W., Baynham, C. F. A., Bowden, W., Hill, I. R., Hobson, R., Vianello, A., et al. (2022) · Nature Communications · doi:10.1038/s41467-021-27884-3 · Cited by 118
Common-clock very long baseline interferometry using a coherent optical fiber link
Clivati, C., Aiello, R., Bianco, G., Bortolotti, C., De Natale, P., Di Sarno, V., Maddaloni, P., Maccaferri, G., Mura, A., Negusini, M., et al. (2020) · Optica · doi:10.1364/optica.393356 · Cited by 99
Metadata
- Authors
- Calhoun, M., Huang, S., & Tjoelker, R. L.
- Venue
- Proceedings of the IEEE
- Published
- 2007-10
- Volume
- 95
- Issue
- 10
- Pages
- 1931-1946
- ISSN
- 0018-9219 (ISSN-L)
- OpenAlex
- W2059111708
- Cited by
- 147
- References
- 0
- FWCI
- 4.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.