The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Architecture Exploration for a High-Performance and Low-Power Wireless Vibration Analyzer
Abstract
Vibration based condition monitoring is considered to be the most effective method for analyzing the performance of rotating machinery and for early fault detection. Traditional vibration analyzers used for this purpose provide wired interface(s) to connect sensors with the system that analyzes the vibration data. A wireless vibration analyzer can be useful to monitor and analyze the vibration of rotating as well as inaccessible parts of the machinery. However, for a wireless vibration analyzer, both the performance and power consumption are of major concern, especially for real-time tri-axes (horizontal, vertical, and axial) vibration data processing and analyses at a high sampling rate. To evaluate the performance of such an analyzer, we explore different architectures in order to realize a high-performance and low-power wireless vibration analyzer that can be used in addition to traditional analyzers. For this purpose, four different architectures have been implemented in order to evaluate them in terms of performance, power consumption, cost, and design complexity.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Both devices actually provide better performances than using only a computerbased vibration analyzer [18].”
From Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review (2021) · cites this paper as [18]
Citations
Cites
Vibration Based Condition Monitoring: A Review
Carden, E. P., & Fanning, P. (2004) · Structural Health Monitoring · doi:10.1177/1475921704047500 · Cited by 1,543
Tandon, N., & Choudhury, A. (1999) · Tribology International · doi:10.1016/s0301-679x(99)00077-8 · Cited by 1,351
Callaway, E., Gorday, P., Hester, L., Gutierrez, J. A., Naeve, M., Heile, B., & Bahl, V. (2002) · IEEE Communications Magazine · doi:10.1109/mcom.2002.1024418 · Cited by 550
A DSP-based FFT-analyzer for the fault diagnosis of rotating machine based on vibration analysis
Betta, G., Liguori, C., Paolillo, A., & Pietrosanto, A. (2002) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2002.807987 · Cited by 211
Fault Diagnosis of Rotating Machinery
Edwards, S., Lees, A. W., & Friswell, M. I. (1998) · The Shock and Vibration Digest · doi:10.1177/058310249803000102 · Cited by 151
Contreras-Medina, L. M., Romero-Troncoso, R. D. J., Cabal‐Yépez, E., Rangel‐Magdaleno, J., & Almaraz, J. R. M. (2009) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2009.2021642 · Cited by 72
A LabVIEW based data acquisition system for vibration monitoring and analysis
Gani, A., & Salami, M. J. E. (2003) · Student Conference on Research and Development · doi:10.1109/scored.2002.1033055 · Cited by 64
Virtual spectrum analyzer based on data acquisition card
Bilski, P., & Winiecki, W. (2002) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/19.989906 · Cited by 50
Rangel‐Magdaleno, J., Romero-Troncoso, R. D. J., Osornio-Rios, R. A., Cabal‐Yépez, E., & Domínguez-González, A. (2010) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2010.2047130 · Cited by 36
The application of wireless sensor networks for condition monitoring in three-phase induction motors
Xue, X., Sundararajan, V., & Brithinee, W. P. (2007) · Electrical Insulation Conference and Electrical Manufacturing Expo · doi:10.1109/eeic.2007.4562657 · Cited by 35
Research works printed but not linked: 14
- 2012, MODEL TL-2100
- 2012, TPS736
- 2012, CY62177DV30
- shreve, 1995, Signal Processing for Effective Vibration Analysis
- 2012, ADXL001
- 2012, SG-210SCB
- 2012, AD7980
- 2010, Spartan-6 FPGA SP605 Evaluation Kit
- 2012, CC2520
- 2012, AT32UC3B0256
- 2012, XPower
- 2012, Spartan-6 XCLS6X16-2CPG196 and XC6SLX45T FGG484-3C
- 2012, TS555I
- 2011, Spartan-6 FPGA Configuration
Cited by
Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review
Mohd Ghazali, M. H., & Rahiman, W. (2021) · Shock and Vibration · doi:10.1155/2021/9469318 · Cited by 249
“To overcome these limitations, dedicated hardware such as Digital Signal Processor (DSP) or Field Programmable Gate Array (FPGA) was used alongside a personal computer and sensor for user control and result display [18].”
BackgroundMethodInfluentialBurriel-Valencia, J., Puche-Panadero, R., Martinez-Roman, J., Sapena-Bano, A., & Pineda-Sanchez, M. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2016.2647458 · Cited by 144
“Modern hardware devices can operate at sampling rates well above 100 kHz [8], so that the use of high sampling rates is common: 20 kHz in [9], 50kHz in [10], and 100 kHz in [11].”
Background
Metadata
- Authors
- Shahzad, K., Cheng, P., & Oelmann, B.
- Affiliations
- Mid Sweden University (SE)
- Venue
- IEEE Sensors Journal
- Published
- 2013-02
- Volume
- 13
- Issue
- 2
- Pages
- 670-682
- ISSN
- 1530-437X (ISSN-L)
- 1558-1748
- OpenAlex
- W2086925983
- Cited by
- 32
- References
- 20
- Citations by year
- 2025: 1 · 2024: 1 · 2023: 2 · 2021: 2 · 2018: 2 · 2017: 5 · 2015: 2 · 2014: 13 · 2013: 4
- FWCI
- 8.81
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Sensors Journal (publishedVersion)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Analog and Mixed-Signal Circuit Design
- Physical Sciences › Engineering › Control and Systems Engineering › Embedded Systems and FPGA Design
- Keywords
- vibration-based condition monitoring, rotating machinery, fault detection, low-power hardware design, high sampling rate, hardware architecture comparison
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Architecture Exploration for a High-Performance and Low-Power Wireless Vibration Analyzer. https://app.cochat.ai/papers/10.1109/jsen.2012.2226238
- The paper
- Shahzad, K., Cheng, P., & Oelmann, B. (2013). Architecture Exploration for a High-Performance and Low-Power Wireless Vibration Analyzer. IEEE Sensors Journal. https://doi.org/10.1109/jsen.2012.2226238
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.