The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
A 10-b 120-Msample/s time-interleaved analog-to-digital converter with digital background calibration
Abstract
Digital calibration using adaptive signal processing corrects for offset mismatch, gain mismatch, and sample-time error between time-interleaved channels in a 10-b 120-Msample/s pipelined analog-to-digital converter (ADC). Offset mismatch between channels is overcome with a random chopper-based offset calibration. Gain mismatch and sample-time error are overcome with correlation-based algorithms, which drive the correlation between a signal and its chopped image or its chopped and delayed image to zero. Test results show that, with a 0.99-MHz sinusoidal input, the ADC achieves a peak signal-to-noise-and-distortion ratio (SNDR) of 56.8 dB, a peak integral nonlinearity of 0.88 least significant bit (LSB), and a peak differential nonlinearity of 0.44 LSB. For a 39.9-MHz sinusoidal input, the ADC achieves a peak SNDR of 50.2 dB. The active area is 5.2 mm/sup 2/, and the power dissipation is 234 mW from a 3.3-V supply.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Discrete-Time Signal Processing
Oppenheim, A. V., & Schafer, R. W. (1989) · Cited by 11,775
Lee, E. A., & Messerschmitt, D. G. (1994) · Springer eBooks · doi:10.1007/978-1-4615-3136-4 · Cited by 1,683
(1986) · Signal Processing · doi:10.1016/0165-1684(86)90025-3 · Cited by 1,594
Splitting the unit delay [FIR/all pass filters design]
Laakso, T. I., Valimaki, V., Karjalainen, M., & Laine, U. K. (1996) · IEEE Signal Processing Magazine · doi:10.1109/79.482137 · Cited by 1,168
Time interleaved converter arrays
Black, W. C., & Hodges, D. A. (1980) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.1980.1051512 · Cited by 828
A 10 b, 20 Msample/s, 35 mW pipeline A/D converter
Cho, T. B., & Gray, P. R. (1995) · IEEE Journal of Solid-State Circuits · doi:10.1109/4.364429 · Cited by 633
Splitting the Unit Delay - Tools for fractional delay filter design
Laakso, T. I., Välimäki, V., Karjalainen, M., et al. (1996) · IEEE Signal Processing Magazine · Cited by 534
Digital spectra of nonuniformly sampled signals: fundamentals and high-speed waveform digitizers
Jenq, Y.-C. (1988) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/19.6060 · Cited by 302
A 13-b 2.5-MHz self-calibrated pipelined A/D converter in 3- mu m CMOS
Lin, Y.-M., Kim, B., & Gray, P. R. (1991) · IEEE Journal of Solid-State Circuits · doi:10.1109/4.75065 · Cited by 201
Jin, H., & Lee, E. K. F. (2000) · IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing · doi:10.1109/82.850419 · Cited by 169
Jenq, Y.-C. (1990) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/19.50419 · Cited by 126
Least squared error FIR filter design with transition bands
Burrus, C. S., Soewito, A. W., & Gopinath, R. (1992) · IEEE Transactions on Signal Processing · doi:10.1109/78.139239 · Cited by 83
Evaluation of several variable FIR fractional-sample delay filters
Cain, G. D., Murphy, N. P., & Tarczynski, A. (2002) · Proceedings of ICASSP '94. IEEE International Conference on Acoustics, Speech and Signal Processing · doi:10.1109/icassp.1994.389950 · Cited by 41
Cited by
500-MS/s 5-bit ADC in 65-nm CMOS With Split Capacitor Array DAC
Ginsburg, B. P., & Chandrakasan, A. P. (2007) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2007.892169 · Cited by 366
A 12-GS/s 81-mW 5-bit Time-Interleaved Flash ADC With Background Timing Skew Calibration
El-Chammas, M., & Murmann, B. (2011) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2011.2108125 · Cited by 264
Stepanovic, D., & Nikolic, B. (2013) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2013.2239005 · Cited by 192
Metadata
- Authors
- Jamal, S. M., Fu, D., Chang, N. C.-J., Hurst, P. J., & Lewis, S. H.
- Venue
- IEEE Journal of Solid-State Circuits
- Published
- 2002-12
- Volume
- 37
- Issue
- 12
- Pages
- 1618-1627
- ISSN
- 0018-9200 (ISSN-L)
- OpenAlex
- W2118524348
- Cited by
- 292
- References
- 13
- FWCI
- 11.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.