An Oversampling SAR ADC With DAC Mismatch Error Shaping Achieving 105 dB SFDR and 101 dB SNDR Over 1 kHz BW in 55 nm CMOS
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The successive-approximation-register (SAR) architecture is well known for its high power efficiency in medium-resolution analog-to-digital converters (ADCs). However, when considered for high-precision applications, SAR ADCs suffer from non-linearity resulting from capacitor mismatch and limited dynamic range due to comparator noise. This work presents a mismatch error shaping (MES) technique for oversampling SAR ADCs to achieve 105 dB in-band SFDR without calibration. The capacitor mismatch error is first-order high-pass filtered by simply delaying the reset of LSB capacitor array after sampling. The comparator thermal and flicker noise are also first-order shaped to high frequencies by noise shaping. The prototype in 55 nm CMOS occupies 0.072 mm2and achieves a peak SNDR of 101 dB over 1 kHz bandwidth. It consumes 15.7 μW from a 1.2 V supply at 1 MS/s and can be configured to Nyquist mode up to 5 MS/s. These features enable the application of SAR ADCs in high-precision, multi-purpose sensor readout interfaces.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A 10-bit 50-MS/s SAR ADC With a Monotonic Capacitor Switching Procedure
Liu, C.-C., Chang, S.-J., Huang, G.-Y., & Lin, Y.-Z. (2010) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2010.2042254 · Cited by 1,329
Cited by
Ultrasound-induced wireless energy harvesting: from materials strategies to functional applications
Jiang, L., Yang, Y., Chen, Y., & Zhou, Q. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105131 · Cited by 131
Metadata
- Authors
- Shu, Y.-S., Kuo, L.-T., & Lo, T.-Y.
- Venue
- IEEE Journal of Solid-State Circuits
- Published
- 2016-12
- Volume
- 51
- Issue
- 12
- Pages
- 2928-2940
- ISSN
- 0018-9200 (ISSN-L)
- 1558-173X
- OpenAlex
- W2520964342
- Cited by
- 191
- References
- 1
- FWCI
- 7.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An Oversampling SAR ADC With DAC Mismatch Error Shaping Achieving 105 dB SFDR and 101 dB SNDR Over 1 kHz BW in 55 nm CMOS. https://app.cochat.ai/papers/10.1109/jssc.2016.2592623
- The paper
- Shu, Y.-S., Kuo, L.-T., & Lo, T.-Y. (2016). An Oversampling SAR ADC With DAC Mismatch Error Shaping Achieving 105 dB SFDR and 101 dB SNDR Over 1 kHz BW in 55 nm CMOS. IEEE Journal of Solid-State Circuits. https://doi.org/10.1109/jssc.2016.2592623
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.