The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Demystifying 3D ICs: The Pros and Cons of Going Vertical
Abstract
This article provides a practical introduction to the design trade-offs of the currently available 3D IC technology options. It begins with an overview of techniques, such as wire bonding, microbumps, through vias, and contactless interconnection, comparing them in terms of vertical density and practical limits to their use. We then present a high-level discussion of the pros and cons of 3D technologies, with an analysis relating the number of transistors on a chip to the vertical interconnect density using estimates based on Rent's rule. Next, we provide a more detailed design example of inductively coupled interconnects, with measured results of a system fabricated in a 0.35-μm technology and an analysis of misalignment and crosstalk tolerances. Lastly, we present a case study of a fast Fourier transform (FFT) placed and routed in a 0.18-μm through-via silicon-on-insulator (SOI) technology, comparing the 3D design to a traditional 2D approach in terms of wire length and critical-path delay.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
On computing the discrete Fourier transform
Winograd, S. (1978) · Mathematics of Computation · doi:10.1090/s0025-5718-1978-0468306-4 · Cited by 613
3D processing technology and its impact on iA32 microprocessors
Black, B., Nelson, D. W., Webb, C., & Samra, N. (2004) · IEEE International Conference on Computer Design: VLSI in Computers and Processors (ICCD) · doi:10.1109/iccd.2004.1347939 · Cited by 166
Cited by
Device Requirements for Optical Interconnects to Silicon Chips
Miller, D. (2009) · Proceedings of the IEEE · doi:10.1109/jproc.2009.2014298 · Cited by 1,966
Layer-by-Layer Assembly of Nanowires for Three-Dimensional, Multifunctional Electronics
Javey, A., Nam, Friedman, R. S., Yan, H., & Lieber, C. M. (2007) · Nano Letters · doi:10.1021/nl063056l · Cited by 597
8 Gb 3-D DDR3 DRAM Using Through-Silicon-Via Technology
Kang, U., Chung, H.-J., Heo, S., Park, D.-H., Lee, H., Kim, J. H., Ahn, S.-H., Cha, S.-H., Ahn, J., Kwon, D., et al. (2010) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2009.2034408 · Cited by 485
A novel architecture of the 3D stacked MRAM L2 cache for CMPs
Sun, G., Dong, X., Xie, Y., Li, J., & Chen, Y. (2009) · 2009 IEEE 15th International Symposium on High Performance Computer Architecture · doi:10.1109/hpca.2009.4798259 · Cited by 439
PIM-enabled instructions: a low-overhead, locality-aware processing-in-memory architecture
Ahn, J., Yoo, S., Mutlu, O., & Choi, K. (2015) · Proceedings of the 42nd Annual International Symposium on Computer Architecture · doi:10.1145/2749469.2750385 · Cited by 436
Metadata
- Authors
- Davis, W. R., Wilson, J., Mick, S., Xu, J., Hua, H., Mineo, C., Sule, A. M., Steer, M., & Franzon, P. D.
- Venue
- IEEE Design and Test of Computers
- Published
- 2005-06
- Volume
- 22
- Issue
- 6
- Pages
- 498-510
- ISSN
- 0740-7475 (ISSN-L)
- OpenAlex
- W2023264348
- Cited by
- 836
- References
- 2
- FWCI
- 29.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.