The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Increased Efficiency Versus Increased Reliability
Abstract
The vast majority of totally enclosed fan cooled (TEFC) squirrel cage induction motors in the 1-to 20-hp range installed in the petroleum and chemical industries are National Electrical Manufacturers Association (NEMA) "T" frames built prior to 1992, NEMA "T" frames built in accordance with the Energy Policy Act of 1992 (commonly referred to as EPAct motors), and the NEMA Premium motors, introduced after the year 2000, that exceed the EPAct efficiency standards. All three types are available in accordance with the IEEE 841 recommended practice and standards. The most obvious difference in these three generations of motors is their efficiency levels. There has been some concern expressed by the users of these motors that to achieve the premium levels of efficiency it was necessary to compromise other performance characteristics and the motor reliability. This article addresses these claims and shows that they are without basis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thorsen, O. V., & Dalva, M. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.464536 · Cited by 344
Thorsen, O. V., & Dalva, M. (2002) · Proceedings of IEEE Petroleum and Chemical Industry Technical Conference (PCIC '94) · doi:10.1109/pcicon.1994.347637 · Cited by 264
Machinery Vibration: Measurement and Analysis
Wowk, V. (1991) · Medical Entomology and Zoology · Cited by 229
Cited by
Lessmeier, C., Kimotho, J. K., Zimmer, D., & Sextro, W. (2016) · PHM Society European Conference · doi:10.36001/phme.2016.v3i1.1577 · Cited by 1,268
Advances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140
Recent Advances in Modeling and Online Detection of Stator Interturn Faults in Electrical Motors
Gandhi, A., Corrigan, T., & Parsa, L. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2089937 · Cited by 544
Simulation-driven machine learning: Bearing fault classification
Sobie, C., Freitas, C., & Nicolai, M. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.06.025 · Cited by 256
Gurusamy, V., Bostanci, E., Li, C., Qi, Y., & Akin, B. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.3013128 · Cited by 93
Comprehensive review on inter‐turn fault indexes in permanent magnet motors
Faiz, J., Nejadi‐Koti, H., & Valipour, Z. (2017) · IET Electric Power Applications · doi:10.1049/iet-epa.2016.0196 · Cited by 86
Wang, B., Wang, J., Griffo, A., & Huang, L. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2908595 · Cited by 33
Metadata
- Authors
- Bonnett, A., & Yung, C.
- Venue
- IEEE Industry Applications Magazine
- Published
- 2008-01
- Volume
- 14
- Issue
- 1
- Pages
- 29-36
- ISSN
- 1077-2618 (ISSN-L)
- OpenAlex
- W2030598869
- Cited by
- 359
- References
- 3
- FWCI
- 11.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.