Thermal Modelling and Efficiency Analysis of On-Board Charger Using Wide-Gap Semiconductor Devices for EV Application
The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Abstract
As Electric Vehicle (EV) adoption accelerates, the demand for high-performance and thermally efficient charging infrastructure intensifies. With the continuous advancements and findings in the field of semiconductors and power electronics devices, the need to compare the thermal efficiencies of conventional devices and recent devices is a given. This paper gives a thorough comparative thermal analysis of different semiconductor technologies for the power devices proposed in Onboard Electric Vehicle Charger (OBEVC) using the PLECS software environment. The investigation contrasts the heat loss characteristics and thermal performance of designs utilizing conventional Silicon (Si) MOSFETs, SiC MOSFETs and diodes, and GaN MOSFETs. The research incorporates precise thermal models for WBG devices, carefully taking into factors such as temperature-dependent losses and junction-to-case resistances. Furthermore, the analysis assesses the junction temperatures, maximum component temperatures, and thermal management factors for every design. The goal of this paper is to improve the design of high-performance and thermally efficient EV charging infrastructure by offering important insights into the thermal behavior of WBG Semiconductor devices in comparison to its typical Si counterparts.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“SiC and GaN can operate under high-voltage and high-temperature conditions thanks to their Wide-Bandgaps (2.9-3.4 eV) and critical electric field strengths (2.2-4 MV cm -1 ), outperforming conventional Si in these regimes [2-5].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [4]
In the citing paper
“By contrast, losses associated with output capacitance ( C OSS), gate charge, and voltage overshoot from parasitic inductance are often more significant [4,12,13].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [4]
Citations
Cites
Ultrawide‐Bandgap Semiconductors: Research Opportunities and Challenges
Tsao, J. Y., Chowdhury, S., Hollis, M. A., Jena, D., Johnson, N. M., Jones, K. A., Kaplar, R. J., Rajan, S., Van de Walle, C. G., Bellotti, E., et al. (2018) · Advanced Electronic Materials · doi:10.1002/aelm.201600501 · Cited by 1,602 · cited 1×
“When comparing traditional Si devices with WBG devices, it becomes evident on shift towards adopting the newer technologies [16].”
GaN-based power devices: Physics, reliability, and perspectives
Meneghini, M., De Santi, C., Abid, I., Buffolo, M., Cioni, M., Khadar, R. A., Nela, L., Zagni, N., Chini, A., Medjdoub, F., et al. (2021) · Journal of Applied Physics · doi:10.1063/5.0061354 · Cited by 723 · cited 1×
“Higher electron mobility translates to improved performance, particularly in applications requiring higher switching frequencies [11]-[12].”
Emerging trends in wide band gap semiconductors (SiC and GaN) technology for power devices
Roccaforte, F., Fiorenza, P., Greco, G., Lo Nigro, R., Giannazzo, F., Iucolano, F., & Saggio, M. (2018) · Microelectronic Engineering · doi:10.1016/j.mee.2017.11.021 · Cited by 590 · cited 1×
“[15] Therefore, SiC devices are better suited for high-power application than GaN devices due to their higher thermal conductivity.”
Industrial Electronics for Electric Transportation: Current State-of-the-Art and Future Challenges
Williamson, S. S., Rathore, A. K., & Musavi, F. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2409052 · Cited by 527
A Design Procedure for Optimizing the LLC Resonant Converter as a Wide Output Range Voltage Source
Beiranvand, R., Rashidian, B., Zolghadri, M. R., & Hossein Alavi, S. M. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2187801 · Cited by 293
Thermal conductivity of GaN, GaN71 , and SiC from 150 K to 850 K
Zheng, Q., Li, C., Rai, A., Leach, J. H., Broido, D. A., & Cahill, D. G. (2019) · Physical Review Materials · doi:10.1103/physrevmaterials.3.014601 · Cited by 177
SiC and GaN devices – wide bandgap is not all the same
Kaminski, N., & Hilt, O. (2014) · IET Circuits, Devices & Systems · doi:10.1049/iet-cds.2013.0223 · Cited by 164 · cited 1×
“[13] Semiconductors with higher thermal conductivity dissipate heat more effectively, leading to better cooling and overall performance.”
Contemporary trends in power electronics converters for charging solutions of electric vehicles
(2020) · CSEE Journal of Power and Energy Systems · doi:10.17775/cseejpes.2019.02700 · Cited by 159
Future Prospects of Widebandgap (WBG) Semiconductor Power Switching Devices
Shenai, K. (2014) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2014.2360641 · Cited by 121 · cited 1×
“Higher electron mobility translates to improved performance, particularly in applications requiring higher switching frequencies [11]-[12].”
Improved Power Quality Switched Inductor Cuk Converter for Battery Charging Applications
Ananthapadmanabha, B. R., Maurya, R., & Arya, S. R. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2797005 · Cited by 116 · cited 1×
“[7] The converter operates in Buck operation to provide the DC link voltage to the HBLLC Resonant Converter [8].”
Research works printed but not linked: 1
- 10.1016/j.cles.2022.100016 · DOI
Cited by
Han, G., Kim, J., Park, S., & Bae, W. (2025) · Electronics · doi:10.3390/electronics14214193 · Cited by 34
“By contrast, losses associated with output capacitance ( C OSS ), gate charge, and voltage overshoot from parasitic inductance are often more significant [4,12,13].”
Saxena, V. K., & Kumar, K. (2025) · IEEE North-East India International Energy Conversion Conference and Exhibition (NE-IECCE) · doi:10.1109/ne-iecce64154.2025.11182948 · Cited by 1
“The rapid global adoption of electric vehicles (EVs) has underscored the critical need for efficient power conversion systems to support their charging infrastructure [7], [8].”
Influential
Metadata
- Authors
- Priyadarshini, S., Sridutt, L., Prakash, S., Gunasekaran, K., & Samikannu, R.
- Affiliations
- Vellore Institute of Technology University (IN)
- Botswana International University of Science and Technology (BW)
- ORCID
- Samikannu, Ravi
- Venue
- 2024 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON)
- Publisher
- IEEE
- Published
- 2024-11-08
- Pages
- 1-6
- OpenAlex
- W4405756429
- Cited by
- 2
- References
- 18
- Citations by year
- 2025: 2
- FWCI
- 1.53
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON) (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Physics and Astronomy › Condensed Matter Physics › GaN-based semiconductor devices and materials
- Keywords
- on-board charger, electric vehicle charging, wide bandgap semiconductors, SiC MOSFET, GaN MOSFET, silicon MOSFET, thermal modeling, junction temperature, thermal management, power electronics, heat loss, PLECS simulation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal Modelling and Efficiency Analysis of On-Board Charger Using Wide-Gap Semiconductor Devices for EV Application. https://app.cochat.ai/papers/10.1109/odicon62106.2024.10797485
- The paper
- Priyadarshini, S., Sridutt, L., Prakash, S., Gunasekaran, K., & Samikannu, R. (2024). Thermal Modelling and Efficiency Analysis of On-Board Charger Using Wide-Gap Semiconductor Devices for EV Application. 2024 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON). https://doi.org/10.1109/odicon62106.2024.10797485
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.