The DOI matches its Crossref record; 19 of the 20 references it cites were found in a registry or an index.
Operation of a three phase solid state-Transformer under unbalanced load conditions
Abstract
Solid state transformers (SSTs) have found widespread power applications in traction locomotives, distribution systems, smart grids, etc., where they are going to replace conventional transformers and associated power enhancement equipments to provide better power quality features and functionalities. An eminent structure of SST comprises of three power conversion stages: input (AC-DC), isolation (DC-DC), and output (DC-AC). Multilevel converters are incorporated in several SSTs for operating at high voltage levels. This paper presents a three phase multilevel converter based SST (MCSST) which contains Cascaded H Bridge (CHB) multilevel converters in its input stage. Most of the reported topologies of MCSST have a common low voltage DC (LVDC) bus and a common control block for the entire SST structure. The presented MCSST consists of three independent phase modules and each phase module is controlled separately. Therefore, the outputs of these modules can be applied to both three phase loads as well as three independent single phase loads. Such a configuration can also be used to operate effectively under unbalanced load conditions. The discussed analysis of the reported work is verified using PSCAD/EMTDC simulation results.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Most often, closed-loop control is only considered in the control techniques for the purpose of synchronization and ensures the power quality [110].”
From State of the Art of Solid-State Transformers: Advanced Topologies, Implementation Issues, Recent Progress and Improvements (2020) · cites this paper as [110]
Citations
Cites
Power electronics: circuits, devices, and applications
(1989) · Choice Reviews Online · doi:10.5860/choice.26-3292 · Cited by 2,282
High‐Power Converters and ac Drives
Wu, B. (2006) · Wiley eBooks · doi:10.1002/0471773719 · Cited by 1,640
High‐Power Converters and AC Drives
Wu, B., & Narimani, M. (2017) · doi:10.1002/9781119156079 · Cited by 1,571
Vector analysis and control of advanced static VAR compensators
Schauder, C., & Mehta, H. (1993) · IEE Proceedings C Generation, Transmission and Distribution · doi:10.1049/ip-c.1993.0044 · Cited by 1,049
Voltage and Power Balance Control for a Cascaded H-Bridge Converter-Based Solid-State Transformer
Zhao, T., Wang, G., Bhattacharya, S., & Huang, A. Q. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2216549 · Cited by 642
Generalized Average Modeling of Dual Active Bridge DC–DC Converter
Qin, H., & Kimball, J. W. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2165734 · Cited by 557
Operation, design and control of dual H-bridge-based isolated bidirectional DC–DC converter
Mi, C., Bai, H., Wang, C., & Gargies, S. (2008) · IET Power Electronics · doi:10.1049/iet-pel:20080004 · Cited by 405
Research on voltage and power balance control for cascaded modular solid-state transformer
Shi, J., Gou, W., Yuan, H., Zhao, T., & Huang, A. Q. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2106803 · Cited by 362
A power electronic-based distribution transformer
Ronan, E. R., Sudhoff, S. D., Glover, S. F., & Galloway, D. L. (2002) · IEEE Transactions on Power Delivery · doi:10.1109/61.997934 · Cited by 313
A Power Electronic-Based Distribution Transformer
Ronan, E. R., Sudhoff, S. D., Glover, S. F., & Galloway, D. L. (2002) · IEEE Power Engineering Review · doi:10.1109/mper.2002.4312081 · Cited by 264
Research works printed but not linked: 1
- 10.1049/iet-pel:20080004 · DOI · Paper page
Cited by
Hannan, M. A., Ker, P. J., Lipu, M. S. H., Choi, Z. H., Rahman, M. S. A., Muttaqi, K. M., & Blaabjerg, F. (2020) · IEEE Access · doi:10.1109/access.2020.2967345 · Cited by 339
“For DAB, the power transfer and output voltage can be calculated and correlated to the characteristics of the power devices, as shown in (5); however, for DHB, it is shown in (6) [111].”
BackgroundMethodInfluentialA Review on Power Electronics Technologies for Power Quality Improvement
Afonso, J. L., Tanta, M., Pinto, J. G. O., Monteiro, L. F. C., Machado, L., Sousa, T. J. C., & Monteiro, V. (2021) · Energies · doi:10.3390/en14248585 · Cited by 118
Topologies and Control Strategies of Cascaded Bridgeless Multilevel Rectifiers
Wang, C., Zhuang, Y., Jiao, J., Zhang, H., Wang, C., & Cheng, H. L. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2626788 · Cited by 47
Solid state transformer technologies and applications: A bibliographical survey
Adabi, M. E., Universitat Politecnica de Catalunya, B., & Martinez-Velasco, J. A. (2018) · AIMS energy · doi:10.3934/energy.2018.2.291 · Cited by 20
Control of single-stage AC-AC solid state transformer for power exchange between grids
Liu, Y., Wang, W., Liu, Y., Abu‐Rub, H., & Li, Y. (2016) · IEEE Conference on Industrial Electronics and Applications (ICIEA) · doi:10.1109/iciea.2016.7603708 · Cited by 16
“Overall, the bulky volume is inevitable because of the LF operation of passive components and the installation of additional power quality improvement devices [1], [2].”
Background
Metadata
- Authors
- Venkat, J., Shukla, A., & Kulkarni, S. V.
- Affiliations
- Indian Institute of Technology Bombay (IN)
- Venue
- 2014 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES)
- Publisher
- IEEE
- Published
- 2014-12
- Volume
- 27
- Pages
- 1-6
- OpenAlex
- W2547219501
- Cited by
- 12
- References
- 20
- Citations by year
- 2023: 3 · 2022: 1 · 2021: 1 · 2020: 2 · 2018: 3 · 2016: 2
- FWCI
- 0.81
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- IEEE International Conference on Power Electronics, Drives and Energy Systems (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › HVDC Systems and Fault Protection
- Keywords
- solid-state transformer, cascaded H-bridge converter, unbalanced loads, single-phase loads, AC-DC conversion, power quality
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Operation of a three phase solid state-Transformer under unbalanced load conditions. https://app.cochat.ai/papers/10.1109/pedes.2014.7042116
- The paper
- Venkat, J., Shukla, A., & Kulkarni, S. V. (2014). Operation of a three phase solid state-Transformer under unbalanced load conditions. 2014 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES). https://doi.org/10.1109/pedes.2014.7042116
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.