The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Control strategy for a three phase AC traction drive with three-level GTO PWM inverter
Abstract
A control strategy developed for two-level inverters is applied to the three-level gate-turn-off PWM inverter. This is done by replacing the three-level inverter by two coupled two-level inverters and taking the coupling condition into account. A control strategy based on the method of direct self-control is described. Results from computer simulation for a traction motor with 1400 kW nominal power are shown and discussed.>
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
A New Neutral-Point-Clamped PWM Inverter
Nabae, A., Takahashi, I., & Akagi, H. (1981) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1981.4503992 · Cited by 5,151
Direct self-control (DSC) of inverter-fed induction machine
Depenbrock, M. (1988) · IEEE Transactions on Power Electronics · doi:10.1109/63.17963 · Cited by 1,709
Research works printed but not linked: 4
- depenbrock, 1985, Direct Self-Control (DSC) of converter fed three-phase machines with high dynamic performance, EtzArchiv, 7, 211
- joetten, 1985, A.C. drive with three-level voltage source inverter and high dynamic performance microprocessor control, European Power Electronics Conf, 3.1
- depenbrock, 1987, Torque adjustment in the field-weakening range of converter-fed three-phase machines by Direct Self-Control (DSC), EtzArchiv, 9, 3
- holtz, 1985, An economic very high power PWM inverter for induction motor drives, European Power Electronics Conf, 3.75
Cited by
Sorted by citations
A Review of Multilevel Inverter Topologies in Electric Vehicles: Current Status and Future Trends
Poorfakhraei, A., Narimani, M., & Emadi, A. (2021) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2021.3063550 · Cited by 424
“Utilization of multilevel inverters in traction drives was first proposed in 1988, where a three-level GTO-based neutral point clamped (NPC) was proposed as an efficient substitute for two-level inverters of locomotives’ induction motors [53].”
BackgroundA Review of Modulation and Control Techniques for Multilevel Inverters in Traction Applications
Poorfakhraei, A., Narimani, M., & Emadi, A. (2021) · IEEE Access · doi:10.1109/access.2021.3056612 · Cited by 179
Metadata
- Authors
- Steinke, J. K.
- Affiliations
- Ruhr University Bochum (DE)
- Corresponding author
- Steinke, J.K.
- ORCID
- Steinke, J.K.
- Venue
- PESC '88 Record., 19th Annual IEEE Power Electronics Specialists Conference
- Publisher
- IEEE
- Published
- 2003-01-06
- Pages
- 431-438
- ISSN
- 0275-9306 (ISSN-L)
- OpenAlex
- W2163136162
- Cited by
- 97
- References
- 2
- Citations by year
- 2026: 1 · 2022: 2 · 2021: 3 · 2020: 1 · 2018: 3 · 2017: 5 · 2016: 2 · 2015: 1 · 2014: 2 · 2013: 3 · 2012: 1
- FWCI
- 8.21
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- IEEE Power Electronics Specialists Conference (PESC) (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Sensorless Control of Electric Motors
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Power Systems and Control
- Keywords
- three-level inverter, direct self control, traction motor control
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review