The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Damage propagation modeling for aircraft engine run-to-failure simulation
Abstract
This paper describes how damage propagation can be modeled within the modules of aircraft gas turbine engines. To that end, response surfaces of all sensors are generated via a thermo-dynamical simulation model for the engine as a function of variations of flow and efficiency of the modules of interest. An exponential rate of change for flow and efficiency loss was imposed for each data set, starting at a randomly chosen initial deterioration set point. The rate of change of the flow and efficiency denotes an otherwise unspecified fault with increasingly worsening effect. The rates of change of the faults were constrained to an upper threshold but were otherwise chosen randomly. Damage propagation was allowed to continue until a failure criterion was reached. A health index was defined as the minimum of several superimposed operational margins at any given time instant and the failure criterion is reached when health index reaches zero. Output of the model was the time series (cycles) of sensed measurements typically available from aircraft gas turbine engines. The data generated were used as challenge data for the prognostics and health management (PHM) data competition at PHMpsila08.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“has become a pivotal resource for researchers and practitioners in the field of prognostics and health management, allowing for the realistic simulation and testing of PdM models”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as [21]
In the citing paper
“In addressing this issue, Saxena et al. (2008) have contributed to the field by introducing the CMAPSS dataset”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as [21]
In the citing paper
“This dataset, developed through damage propagation modeling for aircraft engine run-to-failure simulation, has become a pivotal resource for researchers and practitioners in the field of prognostics and health management”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as [21]
In the citing paper
“In addressing this issue, Saxena et al. (2008) have contributed to the field by introducing the CMAPSS dataset”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as Saxena et al. (2008)
In the citing paper
“In addition, a custom S-score, given by Saxena et al. [[21](https://doi.org/10.3390/fi17060244#B21-futureinternet-17-00244)], is employed to evaluate prognostic performance by asymmetrically penalizing over-estimations and under-estimations.”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as Saxena et al. [21]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
The M3-Competition: results, conclusions and implications
Makridakis, S., & Hibon, M. (2000) · International Journal of Forecasting · doi:10.1016/s0169-2070(00)00057-1 · Cited by 1,701
The accuracy of extrapolation (time series) methods: Results of a forecasting competition
Makridakis, S., Andersen, A. P., Carbone, R., Fildes, R. A., Hibon, M., Lewandowski, R., Newton, J., Parzen, E., & Winkler, R. L. (1982) · Journal of Forecasting · doi:10.1002/for.3980010202 · Cited by 1,465
Metrics for evaluating performance of prognostic techniques
Saxena, A., Celaya, J. ́. R., Balaban, E., Goebel, K., Saha, B., Saha, S., & Schwabacher, M. (2008) · International Conference on Prognostics and Health Management (PHM) · doi:10.1109/phm.2008.4711436 · Cited by 546
Self-citationStandardizing the Performance Evaluation of Short-Term Wind Power Prediction Models
Madsen, H., Pinson, P., Kariniotakis, G., Nielsen, H. A., & Nielsen, T. S. (2005) · Wind Engineering · doi:10.1260/030952405776234599 · Cited by 343
User's Guide for the Commercial Modular Aero-Propulsion System Simulation (C-MAPSS)
Frederick, D. K., DeCastro, J., & Litt, J. S. (2007) · NASA Technical Reports Server (NASA) · Cited by 259
Time series prediction competition: The CATS benchmark
Lendasse, A., Erkki Oja, A., Simula, O., & Verleysen, M. (2007) · Neurocomputing · doi:10.1016/j.neucom.2007.02.013 · Cited by 96
Online Model Parameter Estimation of Jet Engine Degradation for Autonomous Propulsion Control
Chatterjee, S., & Litt, J. S. (2003) · AIAA Guidance, Navigation, and Control Conference and Exhibit · doi:10.2514/6.2003-5425 · Cited by 46
Kobayashi, T., & Simon, D. L. (2004) · doi:10.1115/gt2004-53640 · Cited by 43
Self-citationApplication of Autoassociative Neural Network on Gas-Path Sensor Data Validation
Lu, P.-J., & Hsu, T.-C. (2002) · Journal of Propulsion and Power · doi:10.2514/2.6013 · Cited by 35
Probabilistic Matching of Turbofan Engine Performance Models to Test Data
Roth, B. A., Doel, D. L., & Cissell, J. J. (2005) · doi:10.1115/gt2005-68201 · Cited by 34
Research works printed but not linked: 2
- 0, E-Handbook of Statistical Methods
- 0, NN5 Forecasting Compotition for Artificial Neural Networks & Computational Intelligence
Cited by
Machinery health prognostics: A systematic review from data acquisition to RUL prediction
Lei, Y., Li, N., Guo, L., Li, N., Yan, T., & Lin, J. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.016 · Cited by 2,634
Remaining useful life estimation in prognostics using deep convolution neural networks
Li, X., Ding, Q., & Sun, J. (2017) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2017.11.021 · Cited by 1,851
Deep Convolutional Neural Network Based Regression Approach for Estimation of Remaining Useful Life
Babu, G. S. D., Zhao, P., & Li, X. (2016) · Lecture notes in computer science · doi:10.1007/978-3-319-32025-0_14 · Cited by 1,047
Multiobjective Deep Belief Networks Ensemble for Remaining Useful Life Estimation in Prognostics
Zhang, C., Lim, P., Qin, A. K., & Tan, K. C. (2016) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2016.2582798 · Cited by 886
Remaining useful life estimation of engineered systems using vanilla LSTM neural networks
Wu, Y., Yuan, M., Dong, S., Lin, L., & Liu, Y. (2018) · Neurocomputing · doi:10.1016/j.neucom.2017.05.063 · Cited by 789
Metadata
- Authors
- Saxena, A., Goebel, K., Simon, D., & Eklund, N.
- Affiliations
- Ames Research Center (US)
- Glenn Research Center (US)
- GE Global Research (United States) (US)
- Venue
- 2008 International Conference on Prognostics and Health Management
- Publisher
- IEEE
- Published
- 2008-10
- Pages
- 1-9
- OpenAlex
- W2120841219
- Cited by
- 1,954
- References
- 15
- Citations by year
- 2026: 219 · 2025: 290 · 2024: 270 · 2023: 260 · 2022: 206 · 2021: 204 · 2020: 154 · 2019: 106 · 2018: 57 · 2017: 46 · 2016: 41 · 2015: 21 · 2014: 18 · 2013: 17 · 2012: 16
- FWCI
- 16.45
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- International Conference on Prognostics and Health Management (PHM) (publishedVersion)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Reliability and Maintenance Optimization
- Physical Sciences › Engineering › Automotive Engineering › Technical Engine Diagnostics and Monitoring
- Keywords
- damage propagation, aircraft gas turbine engines, prognostics and health management, health indicators, failure criteria, response surface, sensor data
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Damage propagation modeling for aircraft engine run-to-failure simulation. https://app.cochat.ai/papers/10.1109/phm.2008.4711414
- The paper
- Saxena, A., Goebel, K., Simon, D., & Eklund, N. (2008). Damage propagation modeling for aircraft engine run-to-failure simulation. 2008 International Conference on Prognostics and Health Management. https://doi.org/10.1109/phm.2008.4711414
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.