Damage propagation modeling for aircraft engine run-to-failure simulation
The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Abstract
This paper describes how damage propagation can be modeled within the modules of aircraft gas turbine engines. To that end, response surfaces of all sensors are generated via a thermo-dynamical simulation model for the engine as a function of variations of flow and efficiency of the modules of interest. An exponential rate of change for flow and efficiency loss was imposed for each data set, starting at a randomly chosen initial deterioration set point. The rate of change of the flow and efficiency denotes an otherwise unspecified fault with increasingly worsening effect. The rates of change of the faults were constrained to an upper threshold but were otherwise chosen randomly. Damage propagation was allowed to continue until a failure criterion was reached. A health index was defined as the minimum of several superimposed operational margins at any given time instant and the failure criterion is reached when health index reaches zero. Output of the model was the time series (cycles) of sensed measurements typically available from aircraft gas turbine engines. The data generated were used as challenge data for the prognostics and health management (PHM) data competition at PHMpsila08.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“has become a pivotal resource for researchers and practitioners in the field of prognostics and health management, allowing for the realistic simulation and testing of PdM models”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as [21]
In the citing paper
“In addressing this issue, Saxena et al. (2008) have contributed to the field by introducing the CMAPSS dataset”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as [21]
In the citing paper
“This dataset, developed through damage propagation modeling for aircraft engine run-to-failure simulation, has become a pivotal resource for researchers and practitioners in the field of prognostics and health management”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as [21]
In the citing paper
“In addressing this issue, Saxena et al. (2008) have contributed to the field by introducing the CMAPSS dataset”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as Saxena et al. (2008)
In the citing paper
“In addition, a custom S-score, given by Saxena et al. [[21](https://doi.org/10.3390/fi17060244#B21-futureinternet-17-00244)], is employed to evaluate prognostic performance by asymmetrically penalizing over-estimations and under-estimations.”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as Saxena et al. [21]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
The M3-Competition: results, conclusions and implications
Makridakis, S., & Hibon, M. (2000) · International Journal of Forecasting · doi:10.1016/s0169-2070(00)00057-1 · Cited by 1,695
The accuracy of extrapolation (time series) methods: Results of a forecasting competition
Makridakis, S., Andersen, A., Carbone, R., Fildes, R., Hibon, M., Lewandowski, R., Newton, J., Parzen, E., & Winkler, R. (1982) · Journal of Forecasting · doi:10.1002/for.3980010202 · Cited by 1,462
Metrics for evaluating performance of prognostic techniques
Saxena, A., Celaya, J., Balaban, E., Goebel, K., Saha, B., Saha, S., & Schwabacher, M. (2008) · 2008 International Conference on Prognostics and Health Management · doi:10.1109/phm.2008.4711436 · Cited by 518
Self-citationStandardizing the Performance Evaluation of Short-Term Wind Power Prediction Models
Madsen, H., Pinson, P., Kariniotakis, G., Nielsen, H. A., & Nielsen, T. S. (2005) · Wind Engineering · doi:10.1260/030952405776234599 · Cited by 343
User's Guide for the Commercial Modular Aero-Propulsion System Simulation (C-MAPSS)
Frederick, D. K., DeCastro, J., & Litt, J. S. (2007) · NASA Technical Reports Server (NASA) · Cited by 259
Time series prediction competition: The CATS benchmark
Lendasse, A., Erkki Oja, A., Simula, O., & Verleysen, M. (2007) · Neurocomputing · doi:10.1016/j.neucom.2007.02.013 · Cited by 96
Online Model Parameter Estimation of Jet Engine Degradation for Autonomous Propulsion Control
Chatterjee, S., & Litt, J. S. (2003) · AIAA Guidance, Navigation, and Control Conference and Exhibit · doi:10.2514/6.2003-5425 · Cited by 46
Kobayashi, T., & Simon, D. L. (2004) · doi:10.1115/gt2004-53640 · Cited by 43
Self-citationApplication of Autoassociative Neural Network on Gas-Path Sensor Data Validation
Lu, P.-J., & Hsu, T.-C. (2002) · Journal of Propulsion and Power · doi:10.2514/2.6013 · Cited by 35
Probabilistic Matching of Turbofan Engine Performance Models to Test Data
Roth, B. A., Doel, D. L., & Cissell, J. J. (2005) · doi:10.1115/gt2005-68201 · Cited by 34
Research works printed but not linked: 2
- 0, E-Handbook of Statistical Methods
- 0, NN5 Forecasting Compotition for Artificial Neural Networks & Computational Intelligence
Cited by
Machinery health prognostics: A systematic review from data acquisition to RUL prediction
Lei, Y., Li, N., Guo, L., Li, N., Yan, T., & Lin, J. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.016 · Cited by 2,634
“Introduction of the dataset This dataset [13] is composed of multiple run-to-failure data of turbofan engines simulated using a thermo-dynamical simulation model whose diagram is shown in Fig.”
MethodRemaining useful life estimation in prognostics using deep convolution neural networks
Li, X., Ding, Q., & Sun, J.-Q. (2018) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2017.11.021 · Cited by 1,755
Deep Convolutional Neural Network Based Regression Approach for Estimation of Remaining Useful Life
Sateesh Babu, G., Zhao, P., & Li, X.-L. (2016) · Lecture Notes in Computer Science · doi:10.1007/978-3-319-32025-0_14 · Cited by 962
Multiobjective Deep Belief Networks Ensemble for Remaining Useful Life Estimation in Prognostics
Zhang, C., Lim, P., Qin, A. K., & Tan, K. C. (2017) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2016.2582798 · Cited by 870
Remaining useful life estimation of engineered systems using vanilla LSTM neural networks
Wu, Y., Yuan, M., Dong, S., Lin, L., & Liu, Y. (2018) · Neurocomputing · doi:10.1016/j.neucom.2017.05.063 · Cited by 789
Li, T., Zhou, Z., Li, S., Sun, C., Yan, R., & Chen, X. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108653 · Cited by 673
Failure diagnosis using deep belief learning based health state classification
Tamilselvan, P., & Wang, P. (2013) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2013.02.022 · Cited by 630
Machine Remaining Useful Life Prediction via an Attention-Based Deep Learning Approach
Chen, Z., Wu, M., Zhao, R., Guretno, F., Yan, R., & Li, X. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2972443 · Cited by 618
A comprehensive review on convolutional neural network in machine fault diagnosis
Jiao, J., Zhao, M., Lin, J., & Liang, K. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.07.088 · Cited by 575
Listou Ellefsen, A., Bjørlykhaug, E., Æsøy, V., Ushakov, S., & Zhang, H. (2019) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2018.11.027 · Cited by 523
Xu, Z., & Saleh, J. H. (2021) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2021.107530 · Cited by 500
Chen, J., Jing, H., Chang, Y., & Liu, Q. (2019) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2019.01.006 · Cited by 497
A Bidirectional LSTM Prognostics Method Under Multiple Operational Conditions
Huang, C.-G., Huang, H.-Z., & Li, Y.-F. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2891463 · Cited by 476
Long short-term memory for machine remaining life prediction
Zhang, J., Wang, P., Yan, R., & Gao, R. X. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.05.011 · Cited by 463
Direct Remaining Useful Life Estimation Based on Support Vector Regression
Khelif, R., Chebel-Morello, B., Malinowski, S., Laajili, E., Fnaiech, F., & Zerhouni, N. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2623260 · Cited by 438
Deep separable convolutional network for remaining useful life prediction of machinery
Wang, B., Lei, Y., Li, N., & Yan, T. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106330 · Cited by 412
Fault diagnosis and remaining useful life estimation of aero engine using LSTM neural network
Yuan, M., Wu, Y., & Lin, L. (2016) · 2016 IEEE International Conference on Aircraft Utility Systems (AUS) · doi:10.1109/aus.2016.7748035 · Cited by 377
Yu, W., Kim, I. Y., & Mechefske, C. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.05.005 · Cited by 403
Remaining useful life prediction using multi-scale deep convolutional neural network
Li, H., Zhao, W., Zhang, Y., & Zio, E. (2020) · Applied Soft Computing · doi:10.1016/j.asoc.2020.106113 · Cited by 390
Zhang, J., Jiang, Y., Wu, S., Li, X., Luo, H., & Yin, S. (2022) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2021.108297 · Cited by 395
Remaining useful lifetime prediction via deep domain adaptation
da Costa, P. R. D. O., Akçay, A., Zhang, Y., & Kaymak, U. (2020) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2019.106682 · Cited by 381
Fusing physics-based and deep learning models for prognostics
Chao, M. A., Kulkarni, C. S., Goebel, K., & Fink, O. (2022) · Repository for Publications and Research Data (ETH Zurich) · doi:10.3929/ethz-b-000506035 · Cited by 369
Self-citationEnsemble of data-driven prognostic algorithms for robust prediction of remaining useful life
Hu, C., Youn, B. D., Wang, P., & Taek Yoon, J. (2012) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2012.03.008 · Cited by 361
Wu, J., Hu, K., Cheng, Y., Zhu, H., Shao, X., & Wang, Y. (2020) · ISA Transactions · doi:10.1016/j.isatra.2019.07.004 · Cited by 349
A dual-LSTM framework combining change point detection and remaining useful life prediction
Shi, Z., & Chehade, A. (2021) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2020.107257 · Cited by 351
Aircraft Engine Run-to-Failure Dataset under Real Flight Conditions for Prognostics and Diagnostics
Arias Chao, M., Kulkarni, C., Goebel, K., & Fink, O. (2021) · Data · doi:10.3390/data6010005 · Cited by 339
Self-citationRemaining useful life estimation via transformer encoder enhanced by a gated convolutional unit
Mo, Y., Wu, Q., Li, X., & Huang, B. (2021) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-021-01750-x · Cited by 328
Liu, K., Gebraeel, N. Z., & Shi, J. (2013) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2013.2250282 · Cited by 332
Remaining Useful Life Prediction Using a Novel Feature-Attention-Based End-to-End Approach
Liu, H., Liu, Z., Jia, W., & Lin, X. (2021) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.2983760 · Cited by 324
García Nieto, P. J., García-Gonzalo, E., Sánchez Lasheras, F., & de Cos Juez, F. J. (2015) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2015.02.001 · Cited by 321
Deep learning for prognostics and health management: State of the art, challenges, and opportunities
Rezaeianjouybari, B., & Shang, Y. (2020) · Measurement · doi:10.1016/j.measurement.2020.107929 · Cited by 310
Deep learning models for predictive maintenance: a survey, comparison, challenges and prospects
Serradilla, O., Zugasti, E., Rodriguez, J., & Zurutuza, U. (2022) · Applied Intelligence · doi:10.1007/s10489-021-03004-y · Cited by 302
Liu, L., Song, X., & Zhou, Z. (2022) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2022.108330 · Cited by 348
Bayesian Deep-Learning-Based Health Prognostics Toward Prognostics Uncertainty
Peng, W., Ye, Z.-S., & Chen, N. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2907440 · Cited by 294
Miao, H., Li, B., Sun, C., & Liu, J. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2900295 · Cited by 293
A multimodal and hybrid deep neural network model for Remaining Useful Life estimation
Al-Dulaimi, A., Zabihi, S., Asif, A., & Mohammadi, A. (2019) · Computers in Industry · doi:10.1016/j.compind.2019.02.004 · Cited by 280
Deep digital twins for detection, diagnostics and prognostics
Booyse, W., Wilke, D. N., & Heyns, S. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106612 · Cited by 274
Dual-Aspect Self-Attention Based on Transformer for Remaining Useful Life Prediction
Zhang, Z., Song, W., & Li, Q. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3160561 · Cited by 269
Relation between prognostics predictor evaluation metrics and local interpretability SHAP values
Baptista, M. L., Goebel, K., & Henriques, E. M. P. (2022) · Artificial Intelligence · doi:10.1016/j.artint.2022.103667 · Cited by 270
Self-citationRemaining useful life estimation based on stochastic deterioration models: A comparative study
Le Son, K., Fouladirad, M., Barros, A., Levrat, E., & Iung, B. (2013) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2012.11.022 · Cited by 272
Remaining useful life prediction of aircraft engine based on degradation pattern learning
Zhao, Z., Liang, B., Wang, X., & Lu, W. (2017) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2017.02.007 · Cited by 267
Health status assessment and remaining useful life prediction of aero-engine based on BiGRU and MMoE
Zhang, Y., Xin, Y., Liu, Z.-W., Chi, M., & Ma, G. (2022) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2021.108263 · Cited by 268
An integrated multi-head dual sparse self-attention network for remaining useful life prediction
Zhang, J., Li, X., Tian, J., Luo, H., & Yin, S. (2023) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2023.109096 · Cited by 263
XJTU-SY Rolling Element Bearing Accelerated Life Test Datasets: A Tutorial
Yaguo, L., Tianyu, H., Biao, W., Naipeng, L., Tao, Y., & Jun, Y. (2019) · Journal of Mechanical Engineering · doi:10.3901/jme.2019.16.001 · Cited by 257
A Directed Acyclic Graph Network Combined With CNN and LSTM for Remaining Useful Life Prediction
Li, J., Li, X., & He, D. (2019) · IEEE Access · doi:10.1109/access.2019.2919566 · Cited by 256
Li, T., Zhao, Z., Sun, C., Yan, R., & Chen, X. (2021) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2021.107878 · Cited by 251
Xia, T., Song, Y., Zheng, Y., Pan, E., & Xi, L. (2020) · Computers in Industry · doi:10.1016/j.compind.2019.103182 · Cited by 235
Multicellular LSTM-based deep learning model for aero-engine remaining useful life prediction
Xiang, S., Qin, Y., Luo, J., Pu, H., & Tang, B. (2021) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2021.107927 · Cited by 233
Wen, Y., Fashiar Rahman, M., Xu, H., & Tseng, T.-L. B. (2022) · Measurement · doi:10.1016/j.measurement.2021.110276 · Cited by 223
Resilience-Driven System Design of Complex Engineered Systems
Youn, B. D., Hu, C., & Wang, P. (2011) · Journal of Mechanical Design · doi:10.1115/1.4004981 · Cited by 193
Ensemble of data-driven prognostic algorithms for robust prediction of remaining useful life
Hu, C., Youn, B. D., & Wang, P. (2011) · 2011 IEEE Conference on Prognostics and Health Management · doi:10.1109/icphm.2011.6024361 · Cited by 205
Zhang, J., Li, X., Tian, J., Jiang, Y., Luo, H., & Yin, S. (2022) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2022.108986 · Cited by 201
Contrastive Adversarial Domain Adaptation for Machine Remaining Useful Life Prediction
Ragab, M., Chen, Z., Wu, M., Foo, C. S., Kwoh, C. K., Yan, R., & Li, X. (2021) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.3032690 · Cited by 195
Kobayashi, K., & Alam, S. B. (2024) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.107620 · Cited by 190
Zhang, W., Li, X., Ma, H., Luo, Z., & Li, X. (2021) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2021.107556 · Cited by 191
Sun, J., Zuo, H., Wang, W., & Pecht, M. G. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.09.029 · Cited by 191
A New Multivariate Approach for Prognostics Based on Extreme Learning Machine and Fuzzy Clustering
Javed, K., Gouriveau, R., & Zerhouni, N. (2015) · IEEE Transactions on Cybernetics · doi:10.1109/tcyb.2014.2378056 · Cited by 189
Machine learning based concept drift detection for predictive maintenance
Zenisek, J., Holzinger, F., & Affenzeller, M. (2019) · Computers & Industrial Engineering · doi:10.1016/j.cie.2019.106031 · Cited by 188
Digital Twins: Review and Challenges
Juarez, M. G., Botti, V. J., & Giret, A. S. (2021) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4050244 · Cited by 187
A prognostic driven predictive maintenance framework based on Bayesian deep learning
Zhuang, L., Xu, A., & Wang, X.-L. (2023) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2023.109181 · Cited by 184
A gated graph convolutional network with multi-sensor signals for remaining useful life prediction
Wang, L., Cao, H., Xu, H., & Liu, H. (2022) · Knowledge-Based Systems · doi:10.1016/j.knosys.2022.109340 · Cited by 180
Prognostics: a literature review
Elattar, H. M., Elminir, H. K., & Riad, A. M. (2016) · Complex & Intelligent Systems · doi:10.1007/s40747-016-0019-3 · Cited by 181
“Modeling is performed by mathematical equations such as modeling degradation of turbofan engines as a function of efficiency loss and flow [35].”
MethodRecent Advances in Anomaly Detection Methods Applied to Aviation
Basora, L., Olive, X., & Dubot, T. (2019) · Aerospace · doi:10.3390/aerospace6110117 · Cited by 177
Performance-Based Gas Turbine Health Monitoring, Diagnostics, and Prognostics: A Survey
Hanachi, H., Mechefske, C., Liu, J., Banerjee, A., & Chen, Y. (2018) · IEEE Transactions on Reliability · doi:10.1109/tr.2018.2822702 · Cited by 176
Lin, L., Wu, J., Fu, S., Zhang, S., Tong, C., & Zu, L. (2024) · Advanced Engineering Informatics · doi:10.1016/j.aei.2024.102372 · Cited by 172
Zhang, Q., Liu, Q., & Ye, Q. (2024) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.107241 · Cited by 173
Kong, Z., Cui, Y., Xia, Z., & Lv, H. (2019) · Applied Sciences · doi:10.3390/app9194156 · Cited by 170
Shi, J., Zhong, J., Zhang, Y., Xiao, B., Xiao, L., & Zheng, Y. (2024) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2023.109821 · Cited by 168
A generic probabilistic framework for structural health prognostics and uncertainty management
Wang, P., Youn, B. D., & Hu, C. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.10.019 · Cited by 168
Moghaddass, R., & Zuo, M. J. (2014) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2013.11.006 · Cited by 166
Lin, Y.-H., & Li, G.-H. (2022) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2022.3156965 · Cited by 164
Multi-Sensor Prognostics using an Unsupervised Health Index based on LSTM Encoder-Decoder
Malhotra, P., Tv, V., Ramakrishnan, A., Anand, G., Vig, L., Agarwal, P., & Shroff, G. M. (2016) · arXiv (Cornell University) · doi:10.48550/arxiv.1608.06154 · Cited by 159
Sensor-aware CapsNet: Towards trustworthy multisensory fusion for remaining useful life prediction
Li, D., Chen, J., Huang, R., Chen, Z., & Li, W. (2024) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2023.11.009 · Cited by 160
PHM-Oriented Integrated Fusion Prognostics for Aircraft Engines Based on Sensor Data
Xu, J., Wang, Y., & Xu, L. (2014) · IEEE Sensors Journal · doi:10.1109/jsen.2013.2293517 · Cited by 160
Zhao, S., Zhang, Y., Wang, S., Zhou, B., & Cheng, C. (2019) · Measurement · doi:10.1016/j.measurement.2019.06.004 · Cited by 158
Yu, W., Kim, I. Y., & Mechefske, C. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.107322 · Cited by 158
Integration of Data Fusion Methodology and Degradation Modeling Process to Improve Prognostics
Liu, K., & Huang, S. (2014) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2014.2349733 · Cited by 158
State of AI-Based Monitoring in Smart Manufacturing and Introduction to Focused Section
Ding, H., Gao, R. X., Isaksson, A. J., Landers, R. G., Parisini, T., & Yuan, Y. (2020) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2020.3022983 · Cited by 151
Remaining useful life prediction of aero-engine enabled by fusing knowledge and deep learning models
Li, Y., Chen, Y., Hu, Z., & Zhang, H. (2022) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2022.108869 · Cited by 182
Li, Z., Wu, D., Hu, C. K., & Terpenny, J. P. (2017) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2017.12.016 · Cited by 152
Degradation-Aware Remaining Useful Life Prediction With LSTM Autoencoder
Wu, J., Wu, M., Chen, Z., Li, X., & Yan, R. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3055788 · Cited by 150
Zhang, J., Tian, J., Yan, P., Wu, S., Luo, H., & Yin, S. (2024) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2024.109950 · Cited by 163
Duan, Y., Li, H., He, M., & Zhao, D. (2021) · IEEE Sensors Journal · doi:10.1109/jsen.2021.3060395 · Cited by 148
Liu, K., Chehade, A., & Song, C. (2015) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2015.2446752 · Cited by 148
Peng, K., Jiao, R., Dong, J., & Pi, Y. (2019) · Neurocomputing · doi:10.1016/j.neucom.2019.07.075 · Cited by 147
Tian, H., Yang, L., & Ju, B. (2023) · Measurement · doi:10.1016/j.measurement.2023.112816 · Cited by 147
Combining multiple deep learning algorithms for prognostic and health management of aircraft
Che, C., Wang, H., Fu, Q., & Ni, X. (2019) · Aerospace Science and Technology · doi:10.1016/j.ast.2019.105423 · Cited by 161
Remaining useful life with self-attention assisted physics-informed neural network
Liao, X., Chen, S., Wen, P., & Zhao, S. (2023) · Advanced Engineering Informatics · doi:10.1016/j.aei.2023.102195 · Cited by 180
Bi-LSTM-Based Two-Stream Network for Machine Remaining Useful Life Prediction
Jin, R., Chen, Z., Wu, K., Wu, M., Li, X., & Yan, R. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3167778 · Cited by 185
Artificial intelligence in prognostics and health management of engineering systems
Ochella, S., Shafiee, M., & Dinmohammadi, F. (2021) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2021.104552 · Cited by 164
Prediction of Remaining Useful Lifetime (RUL) of turbofan engine using machine learning
Mathew, V., Toby, T., Singh, V., Rao, B. M., & Kumar, M. G. (2017) · doi:10.1109/iccs1.2017.8326010 · Cited by 142
Ma, M., Sun, C., & Chen, X. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2735661 · Cited by 140
Remaining Useful Life Prediction With Partial Sensor Malfunctions Using Deep Adversarial Networks
Li, X., Xu, Y., Li, N., Yang, B., & Lei, Y. (2022) · IEEE/CAA Journal of Automatica Sinica · doi:10.1109/jas.2022.105935 · Cited by 145
Approach for fault prognosis using recurrent neural network
Wu, Q., Ding, K., & Huang, B. (2018) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-018-1428-5 · Cited by 152
Qin, Y., Yang, J., Zhou, J., Pu, H., & Mao, Y. (2023) · Advanced Engineering Informatics · doi:10.1016/j.aei.2023.101973 · Cited by 157
Small data challenges for intelligent prognostics and health management: a review
Li, C., Li, S., Feng, Y., Gryllias, K., Gu, F., & PECHT, M. G. (2024) · Artificial Intelligence Review · doi:10.1007/s10462-024-10820-4 · Cited by 181
A Data-Driven Aero-Engine Degradation Prognostic Strategy
Wang, C., Lu, N., Cheng, Y., & Jiang, B. (2019) · IEEE Transactions on Cybernetics · doi:10.1109/tcyb.2019.2938244 · Cited by 142
Xu, Q., Chen, Z., Wu, K., Wang, C., Wu, M., & Li, X. (2022) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3057030 · Cited by 135
Remaining useful lifetime estimation and noisy gamma deterioration process
Son, K. L., Fouladirad, M., & Barros, A. (2016) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2015.12.016 · Cited by 149
Kong, Z., Jin, X., Xu, Z., & Zhang, B. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3184352 · Cited by 137
Metadata
- Authors
- Saxena, A., Goebel, K., Simon, D., & Eklund, N.
- Affiliations
- Ames Research Center (US)
- Glenn Research Center (US)
- GE Global Research (United States) (US)
- Venue
- 2008 International Conference on Prognostics and Health Management
- Publisher
- IEEE
- Published
- 2008-10
- Pages
- 1-9
- OpenAlex
- W2120841219
- Cited by
- 1,954
- References
- 15
- Citations by year
- 2026: 219 · 2025: 290 · 2024: 270 · 2023: 260 · 2022: 206 · 2021: 204 · 2020: 154 · 2019: 106 · 2018: 57 · 2017: 46 · 2016: 41 · 2015: 21 · 2014: 18 · 2013: 17 · 2012: 16
- FWCI
- 16.45
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- International Conference on Prognostics and Health Management (PHM) (publishedVersion)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Reliability and Maintenance Optimization
- Physical Sciences › Engineering › Automotive Engineering › Technical Engine Diagnostics and Monitoring
- Keywords
- damage propagation, aircraft gas turbine engines, prognostics and health management, health indicators, failure criteria, response surface, sensor data
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.