The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Grid tied converter with virtual kinetic storage
Abstract
The increase of relatively small scale dispersed power generation (DG) is likely to impact the structure and operation of power generation and distribution systems. The current power system comprises multiple generators. Their intrinsic kinetic energy buffer (rotor inertia) plays an important role in short term system stability. Generators that are connected via power electronic power converters lack these kinetic buffers. Optimal power transfer from source to grid is often used as a control objective to optimize the energy yield. At power system level this approach may compromise stability. In this paper it is demonstrated that by emulation of rotor inertia, stability problems on a system level can be mitigated. For that purpose a short-term energy buffer is added to the system that can be controlled at a fast rate, thereby forming a so-called Virtual Synchronous Generator (VSG). Power system stability support then becomes an additional control objective of the DG. Maximum rotor angular speed deviation and maximum critical clearing time are used as performance indicators for the evaluation. Sizing of the short term buffer constitutes a second topic of this paper.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(2004) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2004.825981 · Cited by 3,719
Power system control and stability.
(1979) · Mathematics and Computers in Simulation · doi:10.1016/0378-4754(79)90142-3 · Cited by 2,574
Design and Control of an LCL-Filter-Based Three-Phase Active Rectifier
Liserre, M., Blaabjerg, F., & Hansen, S. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.853373 · Cited by 2,402
Power System Control and Stability
Anderson, P. M., & Fouad, A. A. (2002) · Institute of Electrical and Electronics Engineers eBooks · doi:10.1109/9780470545577 · Cited by 1,476
DEFINITION AND CLASSIFICATION OF POWER SYSTEM STABILITY
Pawar, N. B. (2015) · Figshare · doi:10.6084/m9.figshare.1367452.v1 · Cited by 551
Voltage instability: phenomena, countermeasures, and analysis methods
Van Cutsem, T. (2000) · Proceedings of the IEEE · doi:10.1109/5.823999 · Cited by 345
Visscher, K., & De Haan, S. W. H. (2008) · CIRED Seminar 2008: SmartGrids for Distribution · doi:10.1049/ic:20080487 · Cited by 208
Self-citationStability analysis of transmission system with high penetration of distributed generation
Reza, M. (2006) · Research Repository (Delft University of Technology) · Cited by 46
Cited by
Future low-inertia power systems: Requirements, issues, and solutions - A review
Ratnam, K. S., Palanisamy, K., & Yang, G. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109773 · Cited by 474
Grid support functionalities based on modular multilevel converters with synchronous power control
Verdugo, C., Candela, J. I., & Rodriguez, P. (2016) · 2016 IEEE International Conference on Renewable Energy Research and Applications (ICRERA) · doi:10.1109/icrera.2016.7884399 · Cited by 23
Metadata
- Authors
- van Wesenbeeck, M. P. N., de Haan, S. W. H., Varela, P., & Visscher, K.
- Venue
- 2009 IEEE Bucharest PowerTech
- Publisher
- IEEE
- Published
- 2009-06
- Pages
- 1-7
- OpenAlex
- W2142419179
- Cited by
- 285
- References
- 8
- FWCI
- 8.39
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Grid tied converter with virtual kinetic storage. https://app.cochat.ai/papers/10.1109/ptc.2009.5282048
- The paper
- van Wesenbeeck, M. P. N., de Haan, S. W. H., Varela, P., & Visscher, K. (2009). Grid tied converter with virtual kinetic storage. 2009 IEEE Bucharest PowerTech. https://doi.org/10.1109/ptc.2009.5282048
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
