CoChat

Reliability practices for satellite design and assembly focusing on FMECA, cleanliness and X-ray inspection

Baylakoglu, Ilknur, Cal, Baris, Harmandali, Murat, Koksal, Engin, Gun, Vedat · 2011 · Proceedings of 5th International Conference on Recent Advances in Space Technologies - RAST2011

The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.

Abstract

Because most space systems are extremely complex, and need to service long enough under extreme environmental conditions, it is necessary to perform, execute, and provide a method of risk identification during the design stage. The Failure Modes Effects and Criticality Analysis, FMECA has been recognized as such an effective approach that provides the necessary visibility during the design period by identifying mission critical failure modes and provides an input for design alteration. Besides design improvement tools, the manufacturing and inspection procedures of space application products like satellite need to take care special attention. The cleanliness requirements of soldering and assembly areas should be supplied to avoid the occurrence of failure mechanisms caused by contaminants like particulates; such as dirt, sand, industrial fumes, hair cosmetics, dead human skin cells, fibers and lint from clothing, chips and burrs from machined surfaces and etc. As a sophisticated inspection tool, X-ray is particularly beneficial for the evaluation of solder joints and assemblies that involve advanced packaging technologies such as: Ball grid array (BGA), land grid array (LGA), chip size package (CSP), flip chip (FC), wafer level packaging (WLP), system in package (SIP) and quad flat-pack no leads (QFN) etc. The use of X-ray inspection is forced by the standards for space application products BGA solder joints. The defects can be detected by X-ray inspection are; shorts, voiding, delamination, missing part, open, misalignment, warpage, counterfeit components etc.

Overview

Integrity signals

Registry

Crossref · 10.1109/rast.2011.5966985

Cites

6 of 6 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Show all 6 references

Research works printed but not linked: 11

  1. mucciacciaro, 2011, Chemical Analysis Techniques, Cleanroom Materials Selection and Contamination Control, 26th Space Simulation Conference, 18
  2. 0, Workmanship Standard for Surface Mount Technology, NASA-STD 8739 2
  3. 0, IPC-A-610E standard Acceptability of Electronic Assemblies
  4. 0, IPC-7095B standard Design and Assembly Process Implementation for BGAs
  5. partee, 2004, Empfasis
  6. adams, 2003, Space Radiation Effects in Electronic Components, Brunel University Spur Electron For PA and Safety Office
  7. 2007, Physics of Failure Approach to FMEA, Milena Krasich
  8. 1980, Procedures for Performing a Failure Mode, Effects and Criticality Analysis, MIL-STD-1629A standard
  9. 0, Technical Tips Documents, US Navy's National Electronics Manufacturing Center of Excellence (EMPF)
  10. duphily, 2009, Space Vehicle Failure Modes, Effects, and Criticality Analysis (FMECA) Guide, Space and Missile Systems Center Air Force Space Command
  11. munson, 2004, Understanding Specific Area Cleanliness, Circuit Assembly

Cited by

See all 3

Metadata

Authors
Baylakoglu, I., Cal, B., Harmandali, M., Koksal, E., & Gun, V.
Affiliations
Türkiye Bilimsel ve Teknolojik Araştırma Kurumu (TR)
Venue
Proceedings of 5th International Conference on Recent Advances in Space Technologies - RAST2011
Publisher
IEEE
Published
2011-06
Pages
962-967
OpenAlex
W2111753041
Cited by
3
References
6
Citations by year
2022: 1 · 2019: 1 · 2018: 1
FWCI
0.00
Type
conference paper
Language
en
Open access
closed
Locations
International Conference on Recent Advances in Space Technologies (publishedVersion)
Topics
  • Physical Sciences › Engineering › Aerospace Engineering › Spacecraft Design and Technology
  • Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Reliability and Maintenance Optimization
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Electronic Packaging and Soldering Technologies
Keywords
satellite design, satellite assembly, FMECA, reliability, cleanliness, X-ray inspection, solder joint defects, ball grid array, land grid array, chip size package, flip-chip packaging, wafer-level packaging, system-in-package, space applications, risk identification

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Reliability practices for satellite design and assembly focusing on FMECA, cleanliness and X-ray inspection. https://app.cochat.ai/papers/10.1109/rast.2011.5966985
The paper
Baylakoglu, I., Cal, B., Harmandali, M., Koksal, E., & Gun, V. (2011). Reliability practices for satellite design and assembly focusing on FMECA, cleanliness and X-ray inspection. Proceedings of 5th International Conference on Recent Advances in Space Technologies - RAST2011. https://doi.org/10.1109/rast.2011.5966985

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.