The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Impedance control stability properties in common implementations
Abstract
Various implementations of impedance control have been suggested, usually based on idealized models of the physical system. This work considers the nonideal, practical effects of computation and/or communication delays and manipulator dynamics on the behavior of two primary approaches to impedance control. The results are cast in the form of stability boundaries, i.e. the relationships between desired impedance parameters which cause marginally stable behavior in the overall system. These stability boundaries are compared for the two primary implementations, and relative benefits of each approach are discussed. These comparisons provide the basis for quantitative tradeoffs, allowing selection of control implementation approaches suited for particular manipulators or allowing quantitative decisions to be made in manipulator system design.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Impedance Control: An Approach to Manipulation: Part I—Theory
Hogan, N. (1985) · Journal of Dynamic Systems, Measurement, and Control · doi:10.1115/1.3140702 · Cited by 3,673
Hybrid Position/Force Control of Manipulators
Raibert, M. H., & Craig, J. J. (1981) · Journal of Dynamic Systems, Measurement, and Control · doi:10.1115/1.3139652 · Cited by 3,015
Khatib, O. (1987) · IEEE Journal on Robotics and Automation · doi:10.1109/jra.1987.1087068 · Cited by 2,940
Impedance Control: An Approach to Manipulation
Hogan, N. (1984) · 1984 American Control Conference · doi:10.23919/acc.1984.4788393 · Cited by 2,929
Dynamic stability issues in force control of manipulators
An, C., & Hollerbach, J. (2005) · Proceedings. 1987 IEEE International Conference on Robotics and Automation · doi:10.1109/robot.1987.1087935 · Cited by 223
Dynamic Stability Issues in Force Control of Manipulators
An, C. H., & Hollerbach, J. M. (1987) · doi:10.23919/acc.1987.4789427 · Cited by 170
Position-based impedance control - Achieving stability in practice
Lawrence, D., & Stoughton, R. M. (1987) · Guidance, Navigation and Control Conference · doi:10.2514/6.1987-2265 · Cited by 41
Self-citation
Cited by
Patient- cooperative strategies for robot-aided treadmill training: first experimental results
Riener, R., Lunenburger, L., Jezernik, S., Anderschitz, M., Colombo, G., & Dietz, V. (2005) · IEEE Transactions on Neural Systems and Rehabilitation Engineering · doi:10.1109/tnsre.2005.848628 · Cited by 729
A novel approach to stroke rehabilitation: Robot-aided sensorimotor stimulation
Volpe, B. T., Krebs, H. I., Hogan, N., Edelstein, L., Diels, C., & Aisen, M. (2000) · Neurology · doi:10.1212/wnl.54.10.1938 · Cited by 582
Unified Impedance and Admittance Control
Ott, C., Mukherjee, R., & Nakamura, Y. (2010) · 2010 IEEE International Conference on Robotics and Automation · doi:10.1109/robot.2010.5509861 · Cited by 342
The parallel approach to force/position control of robotic manipulators
Chiaverini, S., & Sciavicco, L. (1993) · IEEE Transactions on Robotics and Automation · doi:10.1109/70.246048 · Cited by 326
An overview of robot force control
Zeng, G., & Hemami, A. (1997) · Robotica · doi:10.1017/s026357479700057x · Cited by 322
Metadata
- Authors
- Lawrence, D. A.
- Venue
- Proceedings. 1988 IEEE International Conference on Robotics and Automation
- Publisher
- IEEE Comput. Soc. Press
- Published
- 2003-01-06
- Pages
- 1185-1190
- ISSN
- 1050-4729 (ISSN-L)
- OpenAlex
- W2150446927
- Cited by
- 290
- References
- 7
- FWCI
- 31.10
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.