The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Conformable and scalable tactile sensor skin for curved surfaces
Abstract
We present the design and realization of a conformable tactile sensor skin (patent pending). The skin is organized as a network of self-contained modules consisting of tiny pressure-sensitive elements which communicate through a serial bus. By adding or removing modules it is possible to adjust the area covered by the skin as well as the number (and density) of tactile elements. The skin is therefore highly modular and thus intrinsically scalable. Moreover, because the substrate on which the modules are mounted is sufficiently pliable to be folded and stiff enough to be cut, it is possible to freely distribute the individual tactile elements. A tactile skin composed of multiple modules can also be installed on curved surfaces. Due to their easy configurability we call our sensors "cut-and-paste tactile sensors." We describe a prototype implementation of the skin on a humanoid robot
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review Article Tactile sensing for mechatronics—a state of the art survey
Lee, M. H., & Nicholls, H. R. (1999) · Mechatronics · doi:10.1016/s0957-4158(98)00045-2 · Cited by 704
A Survey of Robot Tactile Sensing Technology
Nicholls, H. R., & Lee, M. H. (1989) · The International Journal of Robotics Research · doi:10.1177/027836498900800301 · Cited by 325
Cited by
Hammock, M. L., Chortos, A., Tee, B. C. ‐., Tok, J. B. ‐., & Bao, Z. (2013) · Advanced Materials · doi:10.1002/adma.201302240 · Cited by 2,396
Tactile Sensing—From Humans to Humanoids
Dahiya, R. S., Metta, G., Valle, M., & Sandini, G. (2010) · IEEE Transactions on Robotics · doi:10.1109/tro.2009.2033627 · Cited by 1,851
Tactile sensing for dexterous in-hand manipulation in robotics—A review
Yousef, H., Boukallel, M., & Althoefer, K. (2011) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2011.02.038 · Cited by 784
Flexible Tactile Sensing Based on Piezoresistive Composites: A Review
Stassi, S., Cauda, V., Canavese, G., & Pirri, C. (2014) · Sensors · doi:10.3390/s140305296 · Cited by 433
Directions Toward Effective Utilization of Tactile Skin: A Review
Dahiya, R. S., Mittendorfer, P., Valle, M., Cheng, G., & Lumelsky, V. J. (2013) · IEEE Sensors Journal · doi:10.1109/jsen.2013.2279056 · Cited by 428
Metadata
- Authors
- Ohmura, Y., Kuniyoshi, Y., & Nagakubo, A.
- Venue
- Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006.
- Publisher
- IEEE
- Published
- 2006-07-10
- Pages
- 1348-1353
- ISSN
- 1050-4729 (ISSN-L)
- OpenAlex
- W2161255630
- Cited by
- 309
- References
- 2
- FWCI
- 33.73
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.