The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Whole body adhesion: hierarchical, directional and distributed control of adhesive forces for a climbing robot
Abstract
We describe the design and control of a new bio-inspired climbing robot designed to scale smooth vertical surfaces using directional adhesive materials. The robot, called Stickybot, draws its inspiration from geckos and other climbing lizards and employs similar compliance and force control strategies to climb smooth vertical surfaces including glass, tile and plastic panels. Foremost among the design features are multiple levels of compliance, at length scales ranging from centimeters to micrometers, to allow the robot to conform to surfaces and maintain large real areas of contact so that adhesive forces can support it. Structures within the feet ensure even stress distributions over each toe and facilitate engagement and disengagement of the adhesive materials. A force control strategy works in conjunction with the directional adhesive materials to obtain sufficient levels of friction and adhesion for climbing with low attachment and detachment forces.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Surface energy and the contact of elastic solids
Johnson, K. L., Kendall, K., & Roberts, A. D. (1971) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1971.0141 · Cited by 8,061
Evidence for van der Waals adhesion in gecko setae
Autumn, K., Sitti, M., Liang, Y. A., Peattie, A. M., Hansen, W. R., Sponberg, S., Kenny, T. W., Fearing, R., Israelachvili, J. N., & Full, R. J. (2002) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.192252799 · Cited by 1,949
Mechanics of hierarchical adhesion structures of geckos
Gao, H., Wang, X., Yao, H., Gorb, S., & Arzt, E. (2005) · Mechanics of Materials · doi:10.1016/j.mechmat.2004.03.008 · Cited by 675
Frictional adhesion: a new angle on gecko attachment
Autumn, K., Dittmore, A., Santos, D., Spenko, M., & Cutkosky, M. (2006) · Journal of Experimental Biology · doi:10.1242/jeb.02486 · Cited by 651
Self-citationFundamental mechanisms of interfacial friction. 1. Relation between adhesion and friction
Yoshizawa, H., Chen, Y. L., & Israelachvili, J. (1993) · The Journal of Physical Chemistry · doi:10.1021/j100118a033 · Cited by 603
Biomimetic mushroom-shaped fibrillar adhesive microstructure
Gorb, S., Varenberg, M., Peressadko, A., & Tuma, J. (2007) · Journal of The Royal Society Interface · doi:10.1098/rsif.2006.0164 · Cited by 523
Synthetic gecko foot-hair micro/nano-structures as dry adhesives
Sitti, M., & Fearing, R. S. (2003) · Journal of Adhesion Science and Technology · doi:10.1163/156856103322113788 · Cited by 494
Dynamics of geckos running vertically
Autumn, K., Hsieh, S. T., Dudek, D. M., Chen, J., Chitaphan, C., & Full, R. J. (2006) · Journal of Experimental Biology · doi:10.1242/jeb.01980 · Cited by 391
Biologically inspired polymer microfibers with spatulate tips as repeatable fibrillar adhesives
Kim, S., & Sitti, M. (2006) · Applied Physics Letters · doi:10.1063/1.2424442 · Cited by 361
Self-citationScaling Hard Vertical Surfaces with Compliant Microspine Arrays
Asbeck, A. T., Kim, S., Cutkosky, M. R., Provancher, W. R., & Lanzetta, M. (2006) · The International Journal of Robotics Research · doi:10.1177/0278364906072511 · Cited by 328
Self-citationA batch fabricated biomimetic dry adhesive
Northen, M. T., & Turner, K. L. (2005) · Nanotechnology · doi:10.1088/0957-4484/16/8/030 · Cited by 249
Interfacial energy and strength of multiwalled-carbon-nanotube-based dry adhesive
Zhao, Y., Tong, T., Delzeit, L., Kashani, A., Meyyappan, M., & Majumdar, A. (2006) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.2163891 · Cited by 225
WHEN LESS IS MORE: EXPERIMENTAL EVIDENCE FOR TENACITY ENHANCEMENT BY DIVISION OF CONTACT AREA
Peressadko, A., & Gorb, S. N. (2004) · The Journal of Adhesion · doi:10.1080/00218460490430199 · Cited by 202
Geckobot: a gecko inspired climbing robot using elastomer adhesives
Unver, O., Uneri, A., Aydemir, A., & Sitti, M. (2006) · Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006. · doi:10.1109/robot.2006.1642050 · Cited by 166
A climbing autonomous robot for inspection applications in 3D complex environments
Balaguer, C., Giménez, A., Pastor, J. M., Padrón, V. M., & Abderrahim, M. (2000) · Robotica · doi:10.1017/s0263574799002258 · Cited by 159
A low-cost lightweight climbing robot for the inspection of vertical surfaces
Rosa, G. L., Messina, M., Muscato, G., et al. (2002) · Mechatronics · doi:10.1016/s0957-4158(00)00046-5 · Cited by 156
A small wall-walking robot with compliant, adhesive feet
Daltorio, K. A., Horchler, A. D., Gorb, S. N., Ritzmann, R. E., & Quinn, R. D. (2005) · IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) · doi:10.1109/iros.2005.1545596 · Cited by 153
Shape deposition manufacturing of heterogeneous structures
Weiss, L. E., Merz, R., Prinz, F. B., et al. (1997) · Journal of Manufacturing Systems · doi:10.1016/s0278-6125(97)89095-4 · Cited by 148
A Robot that Climbs Walls using Micro-structured Polymer Feet
Daltorio, K. A., Gorb, S. N., Peressadko, A., Horchler, A. D., Ritzmann, R. E., & Quinn, R. D. (2006) · Springer eBooks · doi:10.1007/3-540-26415-9_15 · Cited by 117
A wall-climbing robot for labelling scale of oil tank's volume
Xu, Z., & Pei-sun, M. (2002) · Robotica · doi:10.1017/s0263574701003964 · Cited by 110
Development of a Tracked Climbing Robot
Zhu, J. Y., Sun, D. B., & Tso, S. K. (2002) · Journal of Intelligent & Robotic Systems · doi:10.1023/a:1022383216233 · Cited by 109
The RiSE climbing robot: body and leg design
Saunders, A., Goldman, D. I., Full, R. J., & Buehler, M. (2006) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.666150 · Cited by 107
Directional Adhesive Structures for Controlled Climbing on Smooth Vertical Surfaces
Santos, D., Kim, S., Spenko, M. J., Parness, A. J., & Cutkosky, M. R. (2007) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/robot.2007.363158 · Cited by 82
Self-citationDesign by Composition for Layered Manufacturing*
Binnard, M., & Cutkosky, M. R. (1999) · Journal of Mechanical Design · doi:10.1115/1.533549 · Cited by 43
Self-citationGait Regulation and Feedback on a Robotic Climbing Hexapod
Haynes, G., & Rizzi, A. A. (2006) · doi:10.15607/rss.2006.ii.013 · Cited by 42
Geckobot and Waalbot: Small-Scale Wall Climbing Robots
Ünver, Ö., Murphy, M., & Sitti, M. (2005) · AIAA Infotech@Aerospace Conference · doi:10.2514/6.2005-6940 · Cited by 29
Cited by
The grand challenges of Science Robotics
Yang, G.-Z., Bellingham, J., Dupont, P. E., Fischer, P., Floridi, L., Full, R., Jacobstein, N., Kumar, V., McNutt, M., Merrifield, R., et al. (2018) · Science Robotics · doi:10.1126/scirobotics.aar7650 · Cited by 1,177
Smooth Vertical Surface Climbing With Directional Adhesion
Kim, S., Spenko, M., Trujillo, S., Heyneman, B., Santos, D., & Cutkosky, M. R. (2008) · IEEE Transactions on Robotics · doi:10.1109/tro.2007.909786 · Cited by 661
Self-citationReview of manufacturing processes for soft biomimetic robots
Cho, K.-J., Koh, J.-S., Kim, S., Chu, W.-S., Hong, Y., & Ahn, S.-H. (2009) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-009-0064-6 · Cited by 278
Self-citationGecko adhesion: evolutionary nanotechnology
Autumn, K., & Gravish, N. (2008) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2007.2173 · Cited by 257
Mini-Whegs TM Climbs Steep Surfaces Using Insect-inspired Attachment Mechanisms
Daltorio, K. A., Wei, T. E., Horchler, A. D., Southard, L., Wile, G. D., Quinn, R. D., Gorb, S. N., & Ritzmann, R. E. (2009) · The International Journal of Robotics Research · doi:10.1177/0278364908095334 · Cited by 108
Metadata
- Authors
- Kim, S., Spenko, M., Trujillo, S., Heyneman, B., Mattoli, V., & Cutkosky, M. R.
- Venue
- Proceedings 2007 IEEE International Conference on Robotics and Automation
- Publisher
- IEEE
- Published
- 2007-04
- Pages
- 1268-1273
- ISSN
- 1050-4729 (ISSN-L)
- OpenAlex
- W2157936767
- Cited by
- 259
- References
- 26
- FWCI
- 119.82
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.