The DOI matches its Crossref record.
Micro-channel heat exchanger optimization
Abstract
A complete two-dimensional flow/thermal model of the micro-channel cooler is developed. Optimization of the design parameters with this model is demonstrated for the case of a 1 kW/cm/sup 2/ heat flux with the top surface at 25 degrees C. For this case, pure water could be used as the coolant, or 92% water/8% methanol (-5 degrees C freezing point) if the heat is to be dumped to ice/water. The flow rate should be about 50 cc/s per cm/sup 2/ of surface area. The distribution manifold channel spacing (center-to-center) should be 333 mu m (30 channels/cm). The fin height should be about 167 mu m (H/sub F//L=1). The distribution manifold channel widths should be about 200 mu m (W/L=0.6). The micro-channels should be between 7 mu m and 14 mu m wide, while the ratio of fin thickness to micro-channel width should be from 0.5 to 1.0. With these design parameters, an effective heat transfer coefficient (surface heat flux divided by surface to coolant inlet temperature difference) on the order of 100 W/cm/sup 2/ K will be achieved with a total pressure drop of only about 2 bar.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Co-designing electronics with microfluidics for more sustainable cooling
van Erp, R., Soleimanzadeh, R., Nela, L., Kampitsis, G., & Matioli, E. (2020) · Nature · doi:10.1038/s41586-020-2666-1 · Cited by 1,142
Drummond, K. P., Back, D., Sinanis, M. D., Janes, D. B., Peroulis, D., Weibel, J. A., & Garimella, S. V. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.10.015 · Cited by 427
Three-dimensional numerical optimization of a manifold microchannel heat sink
Ryu, J. H., Choi, D. H., & Kim, S. J. (2003) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(02)00443-x · Cited by 262
A Practical Implementation of Silicon Microchannel Coolers for High Power Chips
Colgan, E. G., Furman, B., Gaynes, M., Graham, W. S., LaBianca, N. C., Magerlein, J. H., Polastre, R. J., Rothwell, M. B., Bezama, R. J., Choudhary, R., et al. (2007) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2007.897977 · Cited by 252
Andhare, R. S., Shooshtari, A., Dessiatoun, S. V., & Ohadi, M. M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.10.133 · Cited by 106
Metadata
- Authors
- Harpole, G. M., & Eninger, J. E.
- Venue
- 1991 Proceedings, Seventh IEEE Semiconductor Thermal Measurement and Management Symposium
- Publisher
- IEEE
- Published
- 2002-12-09
- Pages
- 59-63
- ISSN
- 1065-2221 (ISSN-L)
- OpenAlex
- W2128642555
- Cited by
- 184
- References
- 0
- FWCI
- 4.69
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Micro-channel heat exchanger optimization. https://app.cochat.ai/papers/10.1109/stherm.1991.152913
- The paper
- Harpole, G. M., & Eninger, J. E. (2002). Micro-channel heat exchanger optimization. 1991 Proceedings, Seventh IEEE Semiconductor Thermal Measurement and Management Symposium. https://doi.org/10.1109/stherm.1991.152913
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.