The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Pole placement using dynamic compensators
Abstract
The problem of designing a compensator to obtain arbitrary pole placement in the system consisting of the plant and compensator in cascade is considered. The design uses only those state variables which can be measured. It is shown that for a controllable observable plant a compensator of order\beta = \min(\nu_{c} - 1, \nu_{o} - 1)is sufficient to achieve this result. Here\nu_{c}(\nu_{o})is the controllability (observability) index of the plant. This result is obtained by first showing that any multi-input multi-output linear time-invariant system may be made controllable (observable) from a single input (output) using only output feedback. The main result is then proved in a constructive manner which explicitly relates the compensator parameters to the coefficients of the desired characteristic polynomial.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Observers for multivariable systems
Luenberger, D. (1966) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1966.1098323 · Cited by 1,763
Mathematical Description of Linear Dynamical Systems
Kalman, R. E. (1963) · Journal of the Society for Industrial and Applied Mathematics Series A Control · doi:10.1137/0301010 · Cited by 1,738
On pole assignment in multi-input controllable linear systems
Wonham, W. (1967) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1967.1098739 · Cited by 912
Compensator design for multivariable linear systems
Pearson, J. P., & Ding, C. (1969) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1969.1099137 · Cited by 90
Self-citationCompensator design for dynamic optimization†
Pearson, J. B. (1969) · International Journal of Control · doi:10.1080/00207176908905769 · Cited by 65
Self-citationOptimal linear control systems with incomplete state measurements
Ferguson, J., & Rekasius, Z. (1969) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1969.1099132 · Cited by 46
Optimal control of unstable linear plants with inaccessible states
Dellon, F., & Sarachik, P. (1968) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1968.1098996 · Cited by 34
Cited by
The robust control of a servomechanism problem for linear time-invariant multivariable systems
Davison, E. (1976) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1976.1101137 · Cited by 1,271
Pole assignment by gain output feedback
Kimura, H. (1975) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1975.1101028 · Cited by 521
Robust control of a general servomechanism problem: The servo compensator
Davison, E. J., & Goldenberg, A. (1975) · Automatica · doi:10.1016/0005-1098(75)90022-9 · Cited by 403
A general theory for matrix root-clustering in subregions of the complex plane
Gutman, S., & Jury, E. (1981) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1981.1102764 · Cited by 269
Metadata
- Authors
- Brasch, F., & Pearson, J.
- Venue
- IEEE Transactions on Automatic Control
- Published
- 1970-02
- Volume
- 15
- Issue
- 1
- Pages
- 34-43
- ISSN
- 0018-9286 (ISSN-L)
- OpenAlex
- W2087011979
- Cited by
- 361
- References
- 7
- FWCI
- 39.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.