The DOI matches its Crossref record.
Electrical Characterization of Screen-Printed Circuits on the Fabric
Abstract
Fabrication methods of planar printed circuits on fabrics are introduced and their electrical characteristics are measured and analyzed. Wet patterning method like screen printing as well as dry process of sputtering are used to fabricate the patterned film electrodes on various types of fabrics. The minimum width of the patterns is 0.2 mm for screen printing and 0.1 mm for gold sputtering, and the typical sheet resistance is 134 m ¿/¿. Fabrication methods of capacitors of 1 pF-1 nF and inductors of 500 nH-1 ¿H at 10 MHz on the fabrics are also introduced. Bonding and packaging of silicon chip directly on the fabric circuit board are proposed and their mechanical properties are investigated. The ac impedance of the transmission line is measured as 201-215 ¿ with variation, and the time-domain reflectometry profile shows that the -3 dB frequency of the printed transmission line of 15 cm on the fabric is 80 MHz. A complete system composed of a fabric capacitor sensor input, a controller system-on-a-chip, and an LED array display is implemented on the fabric and its operation is demonstrated successfully.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Wearable Electronics and Smart Textiles: A Critical Review
Stoppa, M., & Chiolerio, A. (2014) · Sensors · doi:10.3390/s140711957 · Cited by 2,107
Rational Design and Enhanced Biocompatibility of a Dry Adhesive Medical Skin Patch
Kwak, M. K., Jeong, H., & Suh, K. Y. (2011) · Advanced Materials · doi:10.1002/adma.201101694 · Cited by 342
Chemical formation of soft metal electrodes for flexible and wearable electronics
Wang, D., Zhang, Y., Lu, X., Ma, Z., Xie, C., & Zheng, Z. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00192d · Cited by 307
Screen printed passive components for flexible power electronics
Ostfeld, A. E., Deckman, I., Gaikwad, A. M., Lochner, C. M., & Arias, A. C. (2015) · Scientific Reports · doi:10.1038/srep15959 · Cited by 119
Metadata
- Authors
- Kim, Y., Kim, H., & Yoo, H.-J.
- Venue
- IEEE Transactions on Advanced Packaging
- Published
- 2010-02
- Volume
- 33
- Issue
- 1
- Pages
- 196-205
- ISSN
- 1521-3323 (ISSN-L)
- 1557-9980
- OpenAlex
- W2095886535
- Cited by
- 187
- References
- 0
- FWCI
- 7.39
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Electrical Characterization of Screen-Printed Circuits on the Fabric. https://app.cochat.ai/papers/10.1109/tadvp.2009.2034536
- The paper
- Kim, Y., Kim, H., & Yoo, H.-J. (2010). Electrical Characterization of Screen-Printed Circuits on the Fabric. IEEE Transactions on Advanced Packaging. https://doi.org/10.1109/tadvp.2009.2034536
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.