The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Compensation of Scanner Creep and Hysteresis for AFM Nanomanipulation
Abstract
Nanomanipulation with atomic force microscopes (AFMs) for nanoparticles with overall sizes on the order of 10 nm has been hampered in the past by the large spatial uncertainties encountered in tip positioning. This paper addresses the compensation of nonlinear effects of creep and hysteresis on the piezo scanners which drive most AFMs. Creep and hysteresis are modeled as the superposition of fundamental operators, and their inverse model is obtained by using the inversion properties of the Prandtl-Ishlinskii operator. Identification of the parameters in the forward model is achieved by a novel method that uses the topography of the sample and does not require position sensors. The identified parameters are used to compute the inverse model, which in turn serves to drive the AFM in an open-loop, feedforward scheme. Experimental results show that this approach effectively reduces the spatial uncertainties associated with creep and hysteresis, and supports automated, computer-controlled manipulation operations that otherwise would fail.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lent, C. S., Tougaw, P. D., Porod, W., & Bernstein, G. H. (1993) · Nanotechnology · doi:10.1088/0957-4484/4/1/004 · Cited by 1,793
Cited by
A Review of Feedforward Control Approaches in Nanopositioning for High-Speed SPM
Clayton, G. M., Tien, S., Leang, K. K., Zou, Q., & Devasia, S. (2009) · Journal of Dynamic Systems, Measurement, and Control · doi:10.1115/1.4000158 · Cited by 401
Metadata
- Authors
- Mokaberi, B., & Requicha, A. A. G.
- Venue
- IEEE Transactions on Automation Science and Engineering
- Published
- 2008-04
- Volume
- 5
- Issue
- 2
- Pages
- 197-206
- ISSN
- 1545-5955 (ISSN-L)
- OpenAlex
- W2141945233
- Cited by
- 199
- References
- 1
- FWCI
- 27.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Compensation of Scanner Creep and Hysteresis for AFM Nanomanipulation. https://app.cochat.ai/papers/10.1109/tase.2007.895008
- The paper
- Mokaberi, B., & Requicha, A. A. G. (2008). Compensation of Scanner Creep and Hysteresis for AFM Nanomanipulation. IEEE Transactions on Automation Science and Engineering. https://doi.org/10.1109/tase.2007.895008
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.