The DOI matches its Crossref record; 58 of the 60 references it cites were found in a registry or an index.
Digital Twin-Based Cyber-Attack Detection Framework for Cyber-Physical Manufacturing Systems
Open accessPublished version of a preprint
Abstract
Smart manufacturing (SM) systems utilize run-time data to improve productivity via intelligent decision-making and analysis mechanisms on both machine and system levels. The increased adoption of cyber-physical systems in SM leads to the comprehensive framework of cyber-physical manufacturing systems (CPMS) where data-enabled decision-making mechanisms are coupled with cyber-physical resources on the plant floor. Due to their cyber-physical nature, CPMS are susceptible to cyber-attacks that may cause harm to the manufacturing system, products, or even the human workers involved in this context. Therefore, detecting cyber-attacks efficiently and timely is a crucial step toward implementing and securing high-performance CPMS in practice. This paper addresses two key challenges to CPMS cyber-attack detection. The first challenge is distinguishing expected anomalies in the system from cyber-attacks. The second challenge is the identification of cyber-attacks during the transient response of CPMS due to closed-loop controllers. Digital twin (DT) technology emerges as a promising solution for providing additional insights into the physical process (twin) by leveraging run-time data, models, and analytics. In this work, we propose a DT framework for detecting cyber-attacks in CPMS during controlled transient behavior as well as expected anomalies of the physical process. We present a DT framework and provide details on structuring the architecture to support cyber-attack detection. Additionally, we present an experimental case study on off-the-shelf 3D printers to detect cyber-attacks utilizing the proposed DT framework to illustrate the effectiveness of our proposed approach.Note to Practitioners—This work is motivated by developing a general-purpose and extensible digital twin-enabled cyber-attack detection framework for manufacturing systems. Existing works in the field consider specialized attack scenarios and models that may not be extensible in practical manufacturing scenarios. We utilize digital twin (DT) technology as a key enabler to develop a systematic and extensible framework where we identify the abnormality of a resource and detect if the abnormality is due to an attack or an expected anomaly. We provide several remarks on how our proposed framework can extend existing industrial control systems (ICS) and can accommodate further extensions. The presented DTs utilize data-driven machine learning models, physics-based models, and subject matter expert knowledge to perform detection and differentiation tasks in the context of expected anomalies and model-based controllers that control the manufacturing process between multiple setpoints. We utilize a model predictive controller on an off-the-shelf 3D printer to run the process, and stage anomalies and cyber-attacks that are successfully detected by the proposed framework.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“This makes them particularly suitable for attacks and faults that selectively perturb a subset of variables while keeping other measurements within nominal ranges, as well as for scenarios where the key symptom is a collapse or distortion of inter-sensor correlation rather than a large deviation of a single signal [94,96,99-101,106-108].”
From AI-Based Anomaly Detection in Industrial Control and Cyber–Physical Systems: A Data-Type-Oriented Systematic Review (2025) · cites this paper as [106]
In the citing paper
“while others make correlations explicit through graph structures, digital twins, energy-based physics features, or multi-instance representations [94,96,99,101,104,106,107].”
From AI-Based Anomaly Detection in Industrial Control and Cyber–Physical Systems: A Data-Type-Oriented Systematic Review (2025) · cites this paper as [106]
In the citing paper
“Historical data was also used in the articles examined[28, 32, 33].”
From Towards enhanced cybersecurity in industrial control systems: a systematic review of context-based modeling, digital twins, and machine learning approaches (2025) · cites this paper as [33]
In the citing paper
“This comprehensive modeling provides deeper insights into system behavior and helps distinguish anomalies caused by physical degradation from those triggered by cyber-attacks [33].”
From Towards enhanced cybersecurity in industrial control systems: a systematic review of context-based modeling, digital twins, and machine learning approaches (2025) · cites this paper as [33]
In the citing paper
“One-class classifiers and autoencoders are frequently used in the literature for anomaly detection, allowing anomalous data to be represented in a latent space and efficiently detected based on deviations from normal patterns [33].”
From Towards enhanced cybersecurity in industrial control systems: a systematic review of context-based modeling, digital twins, and machine learning approaches (2025) · cites this paper as [33]
Citations
Cites
Digital Twin in Industry: State-of-the-Art
Tao, F., Zhang, H., Liu, A., & Nee, A. Y. C. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2873186 · Cited by 5,871 · cited 1×
“The potential and flexibility of DT technology has generated significant research interest from academia and industry on applying DTs for supporting SM in practice, hailing DTs as the cornerstone technology for realizing SM [2], [10], [11], [12], [13].”
Digital Twin: Mitigating Unpredictable, Undesirable Emergent Behavior in Complex Systems
Grieves, M., & Vickers, J. (2017) · Transdisciplinary Perspectives on Complex Systems · doi:10.1007/978-3-319-38756-7_4 · Cited by 3,727 · cited 2×
“The potential and flexibility of DT technology has generated significant research interest from academia and industry on applying DTs for supporting SM in practice, hailing DTs as the cornerstone technology for realizing SM [2], [10], [11], [12], [13].”
Attack Detection and Identification in Cyber-Physical Systems
Pasqualetti, F., Dorfler, F., & Bullo, F. (2013) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2013.2266831 · Cited by 2,109
A Review of the Roles of Digital Twin in CPS-based Production Systems
Negri, E., Fumagalli, L., & Macchi, M. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.198 · Cited by 1,669
Model-based fault-detection and diagnosis – status and applications
Isermann, R. (2005) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2004.12.002 · Cited by 1,579
About The Importance of Autonomy and Digital Twins for the Future of Manufacturing
Rosen, R., von Wichert, G., Lo, G., & Bettenhausen, K. D. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.06.141 · Cited by 1,474 · cited 1×
“The potential and flexibility of DT technology has generated significant research interest from academia and industry on applying DTs for supporting SM in practice, hailing DTs as the cornerstone technology for realizing SM [2], [10], [11], [12], [13].”
Anomaly Detection with Robust Deep Autoencoders
Zhou, C., & Paffenroth, R. C. (2017) · Proceedings of the 23rd ACM SIGKDD International Conference on Knowledge Discovery and Data Mining · doi:10.1145/3097983.3098052 · Cited by 1,436
Guide to Industrial Control Systems (ICS) Security
Stouffer, K., Pillitteri, V., Lightman, S., Abrams, M., & Hahn, A. (2015) · doi:10.6028/nist.sp.800-82r2 · Cited by 1,377 · cited 2×
“Traditional enterprise cybersecurity control implementations are not always possible or feasible within Industrial Control Systems (ICS) network environments and improper implementations can have unintended consequences [17].”
Smart manufacturing: Past research, present findings, and future directions
Kang, H. S., Lee, J. Y., Choi, S., Kim, H., Park, J. H., Son, J. Y., Kim, B. H., & Noh, S. D. (2016) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-016-0015-5 · Cited by 1,362
Model-Based Fault Detection and Diagnosis - Status and Applications
Isermann, R. (2004) · IFAC Proceedings Volumes · doi:10.1016/s1474-6670(17)32149-3 · Cited by 1,262
Research works printed but not linked: 1
- Zong, Deep autoencoding Gaussian mixture model for unsupervised anomaly detection, 1
Cited by
Sarker, I. H., Janicke, H., Mohsin, A., Gill, A., & Maglaras, L. (2024) · ICT Express · doi:10.1016/j.icte.2024.05.007 · Cited by 188
Machine and Deep Learning for Digital Twin Networks: A Survey
Qin, B., Pan, H., Dai, Y., Si, X., Huang, X., Yuen, C., & Zhang, Y. (2024) · IEEE Internet of Things Journal · doi:10.1109/jiot.2024.3416733 · Cited by 101
Digital twins in process engineering: An overview on computational and numerical methods
Peterson, L., Gosea, I. V., Benner, P., & Sundmacher, K. (2024) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2024.108917 · Cited by 83
FL-CTIF: A federated learning based CTI framework based on information fusion for secure IIoT
Salim, M. M., Azzaoui, A. E., Deng, X., & Park, J. H. (2023) · Information Fusion · doi:10.1016/j.inffus.2023.102074 · Cited by 61
Digital patient twins for personalized therapeutics and pharmaceutical manufacturing
Fischer, R.-P., Volpert, A., Antonino, P. O., & Ahrens, T. D. (2024) · Frontiers in Digital Health · doi:10.3389/fdgth.2023.1302338 · Cited by 64
Metadata
- Authors
- Balta, E. C., Pease, M., Moyne, J., Barton, K., & Tilbury, D. M.
- Affiliations
- University of Michigan (US)
- National Institute of Standards and Technology (US)
- Venue
- IEEE Transactions on Automation Science and Engineering
- Published
- 2024-04
- Volume
- 21
- Issue
- 2
- Pages
- 1695-1712
- ISSN
- 1545-5955 (ISSN-L)
- 1558-3783
- OpenAlex
- W4321484089
- Cited by
- 125
- References
- 60
- Citations by year
- 2026: 44 · 2025: 39 · 2024: 31
- FWCI
- 13.38
- Type
- journal article
- Language
- en
- Open access
- green
- doi.org
- Licence
- Locations
- IEEE Transactions on Automation Science and Engineering (publishedVersion)
- Figshare (submittedVersion, cc-by)
- Funders
- NSF (1544678)
- National Institute of Standards Technology (70NANB19H090)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Smart Grid Security and Resilience
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
- Physical Sciences › Computer Science › Computer Networks and Communications › Network Security and Intrusion Detection
- Keywords
- digital twin, cyberattack detection, cyber-physical production systems, smart manufacturing, anomaly detection, transient response, feedback control, model predictive control, 3D printing, industrial control systems
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Digital Twin-Based Cyber-Attack Detection Framework for Cyber-Physical Manufacturing Systems. https://app.cochat.ai/papers/10.1109/tase.2023.3243147
- The paper
- Balta, E. C., Pease, M., Moyne, J., Barton, K., & Tilbury, D. M. (2024). Digital Twin-Based Cyber-Attack Detection Framework for Cyber-Physical Manufacturing Systems. IEEE Transactions on Automation Science and Engineering. https://doi.org/10.1109/tase.2023.3243147
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.