The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Noise Analysis for Comparator-Based Circuits
Open accessAbstract
Noise analysis for comparator-based circuits is presented. The goal is to gain insight into the different sources of noise in these circuits for design purposes. After the general analysis techniques are established, they are applied to different noise sources in the comparator-based switched-capacitor pipeline analog-to-digital converter (ADC). The results show that the noise from the virtual ground threshold detection comparator dominates the overall ADC noise performance. The noise from the charging current can also be significant, depending on the size of the capacitors used, but the contribution was small in the prototype. The other noise sources have contributions comparable to those in op-amp-based designs, and their effects can be managed through appropriate design. In the prototype, folded flicker noise was found to be a significant contributor to the broadband noise because the flicker noise of the comparator extends beyond the Nyquist rate of the converter.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Phase Noise and Jitter in CMOS Ring Oscillators
Abidi, A. A. (2006) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2006.876206 · Cited by 740
Noise in relaxation oscillators
Abidi, A. A., & Meyer, R. G. (1983) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.1983.1052034 · Cited by 228
Cited by
The StrongARM Latch [A Circuit for All Seasons]
Razavi, B. (2015) · IEEE Solid-State Circuits Magazine · doi:10.1109/mssc.2015.2418155 · Cited by 555
An Energy-Efficient Comparator With Dynamic Floating Inverter Amplifier
Tang, X., Shen, L., Kasap, B., Yang, X., Shi, W., Mukherjee, A., Pan, D. Z., & Sun, N. (2020) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2019.2960485 · Cited by 307
Guler, U., Pusane, A. E., & Dundar, G. (2014) · 2014 International Conference on Information Science, Electronics and Electrical Engineering · doi:10.1109/infoseee.2014.6947786 · Cited by 9
Metadata
- Authors
- Sepke, T., Holloway, P., Sodini, C. G., & Lee, H.-S.
- Venue
- IEEE Transactions on Circuits and Systems I: Regular Papers
- Published
- 2009-03
- Volume
- 56
- Issue
- 3
- Pages
- 541-553
- ISSN
- 1549-8328 (ISSN-L)
- 1558-0806
- OpenAlex
- W2098175786
- Cited by
- 164
- References
- 2
- FWCI
- 4.66
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Noise Analysis for Comparator-Based Circuits. https://app.cochat.ai/papers/10.1109/tcsi.2008.2002547
- The paper
- Sepke, T., Holloway, P., Sodini, C. G., & Lee, H.-S. (2009). Noise Analysis for Comparator-Based Circuits. IEEE Transactions on Circuits and Systems I: Regular Papers. https://doi.org/10.1109/tcsi.2008.2002547
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.