The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Current Management in a Hybrid Fuel Cell Power System: A Model-Predictive Control Approach
Abstract
The problem of oxygen starvation in fuel cells coupled with air compressor saturation limits, is addressed in this paper. We propose using a hybrid configuration, in which a bank of ultracapacitors supplements the polymer electrolyte membrane fuel cell during fast current transients. Our objective is to avoid fuel cell oxygen starvation, prevent air compressor surge and choke, and simultaneously match an arbitrary level of current demand. We formulate the distribution of current demand between the fuel cell and the bank of ultracapacitors in a model predictive control framework, which can handle multiple constraints of the hybrid system. Simulation results show that reactant deficit during sudden increase in stack current is reduced from 50% in stand-alone architecture to less than 1% in the hybrid configuration. In addition, the explicit constraint handling capability of the current management scheme prevents compressor surge and choke and maintains the state-of-charge of the ultracapacitor within feasible bounds
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Constrained model predictive control: Stability and optimality
Mayne, D. Q., Rawlings, J. B., Rao, C. V., & Scokaert, P. O. M. (2000) · Automatica · doi:10.1016/s0005-1098(99)00214-9 · Cited by 8,736
A survey of industrial model predictive control technology
Qin, S. J., & Badgwell, T. A. (2003) · Control Engineering Practice · doi:10.1016/s0967-0661(02)00186-7 · Cited by 5,099
Predictive Control With Constraints
Maciejowski, J. M. (2001) · Cambridge University Engineering Department Publications Database · Cited by 4,368
Predictive control with constraints
Camacho, E. F. (2003) · Automatica · doi:10.1016/s0005-1098(03)00056-6 · Cited by 3,530
Digital control of dynamic systems
Franklin, G. F., Workman, M. L., & Powell, D. (1980) · International Linear Collider · Cited by 3,188
Digital control of dynamic systems
Anderson, B. (1981) · IEEE Transactions on Acoustics, Speech, and Signal Processing · doi:10.1109/tassp.1981.1163502 · Cited by 1,690
Power management strategy for a parallel hybrid electric truck
Lin, C.-C., Peng, H., Grizzle, J. W., & Kang, J.-M. (2003) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2003.815606 · Cited by 1,277
Self-citationMethods for state-of-charge determination and their applications
Piller, S., Perrin, M., & Jossen, A. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00560-2 · Cited by 1,162
Gas Turbine Engineering Handbook
Boyce, M. P. (2006) · Elsevier eBooks · doi:10.1016/b978-0-7506-7846-9.x5000-7 · Cited by 830
Model predictive control with linear models
Muske, K. R., & Rawlings, J. B. (1993) · AIChE Journal · doi:10.1002/aic.690390208 · Cited by 713
Cited by
A review on electrochemical double-layer capacitors
Sharma, P., & Bhatti, T. S. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2010.06.031 · Cited by 1,250
Review on model predictive control: an engineering perspective
Schwenzer, M., Ay, M., Bergs, T., & Abel, D. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-07682-3 · Cited by 1,132
PEM fuel cell system control: A review
Daud, W. R. W., Rosli, R. E., Majlan, E. H., Hamid, S. A. A., Mohamed, R., & Husaini, T. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.06.027 · Cited by 708
A Model Predictive Control System for a Hybrid Battery-Ultracapacitor Power Source
Hredzak, B., Agelidis, V. G., & Jang, M. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2262003 · Cited by 449
Fletcher, T., Thring, R., & Watkinson, M. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.08.157 · Cited by 364
Babu, T. S., Vasudevan, K. R., Ramachandaramurthy, V. K., Sani, S. B., Chemud, S., & Lajim, R. M. (2020) · IEEE Access · doi:10.1109/access.2020.3015919 · Cited by 354
Wang, Y., Sun, Z., & Chen, Z. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113707 · Cited by 276
Metadata
- Authors
- Vahidi, A., Stefanopoulou, A., & Peng, H.
- Venue
- IEEE Transactions on Control Systems Technology
- Published
- 2006-11
- Volume
- 14
- Issue
- 6
- Pages
- 1047-1057
- ISSN
- 1063-6536 (ISSN-L)
- OpenAlex
- W2136774055
- Cited by
- 282
- References
- 20
- FWCI
- 46.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.