Two Time-Scaled Battery Model Identification With Application to Battery State Estimation
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Electrified propulsion systems have now become an increasingly popular option for automotive companies to meet the more stringent emissions standards. A well-designed battery state estimation (BSE) system, which includes state-of-charge and state-of-health estimation, is one of the most important aspects of a successful electrified propulsion system design. Among different methods, model-based state estimation has proven to be very successful in their accuracy and implementability. A relatively newer approach to model-based BSE is to identify the battery model parameters (typically a low-order control-oriented model) in real time. This allows the battery model parameter to adjust to changing characteristics of the battery, and thus further improving the robustness of the design. However, standard identification algorithms used have very limited capability in performing this identification successfully due to the frequency response characteristics of the battery. In this brief, we describe a two time-scaled battery model parameter identification method, where the slower and faster battery dynamics are identified separately. Compared with standard approach to real-time battery model identification, where no such separation is made, this method can generate a model whose frequency response is much closer to that of the actual battery. Furthermore, this method uses the standard least squares regression method, which can be easily implemented in real time in the form of recursive least squares. Using this identification method, we show how battery SoC can be estimated. Laboratory battery cell data is used to illustrate the difference between this method and the more standard approach. Then, battery pack collected from a test vehicle is used to demonstrate the SoC estimation capability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The novel state of charge estimation method for lithium battery using sliding mode observer
Kim, I.-S. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.09.006 · Cited by 359
Cited by
Kumar, R. R., Bharatiraja, C., Udhayakumar, K., Devakirubakaran, S., Sekar, K. S., & Mihet-Popa, L. (2023) · IEEE Access · doi:10.1109/access.2023.3318121 · Cited by 471
Zhang, C., Allafi, W., Dinh, Q., Ascencio, P., & Marco, J. (2018) · Energy · doi:10.1016/j.energy.2017.10.043 · Cited by 350
Adaikkappan, M., & Sathiyamoorthy, N. (2022) · International Journal of Energy Research · doi:10.1002/er.7339 · Cited by 324
Chen, C., Xiong, R., & Shen, W. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2670081 · Cited by 295
“, capacity) require dual estimation methods in different timescales [32], [33], which will not only increase the stability of the estimation methods but also reduce their computation complexity.”
BackgroundBarik, S., & Saravanan, B. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113623 · Cited by 73
Metadata
- Authors
- Hu, Y., & Wang, Y.-Y.
- Venue
- IEEE Transactions on Control Systems Technology
- Published
- 2015-05
- Volume
- 23
- Issue
- 3
- Pages
- 1180-1188
- ISSN
- 1063-6536 (ISSN-L)
- 1558-0865
- OpenAlex
- W2121730024
- Cited by
- 72
- References
- 1
- FWCI
- 4.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.