Fault Analysis of a PM Brushless DC Motor Using Finite Element Method
The DOI matches its Crossref record.
Abstract
Three-phase trapezoidal back-EMF permanent magnet (PM) machines are used in many applications where the reliability and fault tolerance are important requirements. Knowledge of the machine transient processes under various fault conditions is the key issue in evaluating the impact of machine fault on the entire electromechanical system. The machine electrical and mechanical quantities whose transient behaviors are of importance under fault conditions include the voltages and currents of the coils and phases, the electromagnetic torque, and the rotor speed. Experimental test based on true machines for such a purpose is impractical for its high cost and difficulty to make. Computer simulation based on the finite element method has shown its effectiveness in fault study in this paper. Before the finite element model was used to perform simulations under fault conditions, it was validated by test data under normal conditions. Three types of fault conditions-single-phase open circuit fault, phase-to-phase terminal short-circuit, and internal turn-to-turn short-circuit have been studied.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Recent Advances in Modeling and Online Detection of Stator Interturn Faults in Electrical Motors
Gandhi, A., Corrigan, T., & Parsa, L. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2089937 · Cited by 544
Fault-Tolerant Control of Five-Phase Permanent-Magnet Motors With Trapezoidal Back EMF
Dwari, S., & Parsa, L. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2045322 · Cited by 289
Faiz, J., & Mazaheri-Tehrani, E. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2608950 · Cited by 207
Choi, S., Haque, M. S., Tarek, M. T. B., Mulpuri, V., Duan, Y., Das, S., Garg, V., Ionel, D. M., Masrur, M. A., Mirafzal, B., et al. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2819627 · Cited by 192
Comprehensive review on inter‐turn fault indexes in permanent magnet motors
Faiz, J., Nejadi‐Koti, H., & Valipour, Z. (2017) · IET Electric Power Applications · doi:10.1049/iet-epa.2016.0196 · Cited by 86
Metadata
- Authors
- Dai, M., Keyhani, A., & Sebastian, T.
- Venue
- IEEE Transactions on Energy Conversion
- Published
- 2005-03
- Volume
- 20
- Issue
- 1
- Pages
- 1-6
- ISSN
- 0885-8969 (ISSN-L)
- OpenAlex
- W2140827084
- Cited by
- 100
- References
- 0
- FWCI
- 6.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fault Analysis of a PM Brushless DC Motor Using Finite Element Method. https://app.cochat.ai/papers/10.1109/tec.2004.841516
- The paper
- Dai, M., Keyhani, A., & Sebastian, T. (2005). Fault Analysis of a PM Brushless DC Motor Using Finite Element Method. IEEE Transactions on Energy Conversion. https://doi.org/10.1109/tec.2004.841516
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.