The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review
Abstract
Recently, research has picked up a fervent pace in the area of fault diagnosis of electrical machines. The manufacturers and users of these drives are now keen to include diagnostic features in the software to improve salability and reliability. Apart from locating specific harmonic components in the line current (popularly known as motor current signature analysis), other signals, such as speed, torque, noise, vibration etc., are also explored for their frequency contents. Sometimes, altogether different techniques, such as thermal measurements, chemical analysis, etc., are also employed to find out the nature and the degree of the fault. In addition, human involvement in the actual fault detection decision making is slowly being replaced by automated tools, such as expert systems, neural networks, fuzzy-logic-based systems; to name a few. It is indeed evident that this area is vast in scope. Hence, keeping in mind the need for future research, a review paper describing different types of faults and the signatures they generate and their diagnostics' schemes will not be entirely out of place. In particular, such a review helps to avoid repetition of past work and gives a bird's eye view to a new researcher in this area.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review of induction motors signature analysis as a medium for faults detection
El Hachemi Benbouzid, M. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873206 · Cited by 1,602
Motor bearing damage detection using stator current monitoring
Schoen, R. R., Habetler, T. G., Kamran, F., & Bartfield, R. G. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.475697 · Cited by 761
Parameter Estimation, Condition Monitoring, and Diagnosis of Electrical Machines
Vas, P. (1992) · doi:10.1093/oso/9780198593751.001.0001 · Cited by 711
Motor bearing damage detection using stator current monitoring
Schoen, R. R., Habetler, T. G., Kamran, F., & Bartheld, R. G. (2002) · Proceedings of 1994 IEEE Industry Applications Society Annual Meeting · doi:10.1109/ias.1994.345491 · Cited by 638
Noninvasive detection of broken rotor bars in operating induction motors
Kliman, G. B., Koegl, R. A., Stein, J., Endicott, R. D., & Madden, M. W. (1988) · IEEE Transactions on Energy Conversion · doi:10.1109/60.9364 · Cited by 525
Vibration and current monitoring for detecting airgap eccentricity in large induction motors
Cameron, J. R., Thomson, W. T., & Dow, A. B. (1986) · IEE Proceedings B Electric Power Applications · doi:10.1049/ip-b.1986.0022 · Cited by 512
Recent developments of induction motor drives fault diagnosis using AI techniques
Filippetti, F., Franceschini, G., Tassoni, C., & Vas, P. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873207 · Cited by 511
Transient analysis of cage induction machines under stator, rotor bar and end ring faults
Toliyat, H. A., & Lipo, T. A. (1995) · IEEE Transactions on Energy Conversion · doi:10.1109/60.391888 · Cited by 489
Self-citationWhat stator current processing-based technique to use for induction motor rotor faults diagnosis?
Benbouzid, M. E. H., & Kliman, G. B. (2003) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2003.811741 · Cited by 485
Dorrell, D. G., Thomson, W. T., & Roach, S. (1997) · IEEE Transactions on Industry Applications · doi:10.1109/28.567073 · Cited by 450
AI techniques in induction machines diagnosis including the speed ripple effect
Filippetti, F., Franceschini, G., Tassoni, C., & Vas, P. (1998) · IEEE Transactions on Industry Applications · doi:10.1109/28.658729 · Cited by 442
Detection and location of interturn short circuits in the stator windings of operating motors
Penman, J., Sedding, H. G., Lloyd, B. A., & Fink, W. T. (1994) · IEEE Transactions on Energy Conversion · doi:10.1109/60.368345 · Cited by 394
Benbouzid, M. E. H., Vieira, M., & Theys, C. (1999) · IEEE Transactions on Power Electronics · doi:10.1109/63.737588 · Cited by 378
Dorrell, D. G., Thomson, W. T., & Roach, S. (2002) · IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting · doi:10.1109/ias.1995.530349 · Cited by 367
Henao, H., Demian, C., & Capolino, G.-A. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.816531 · Cited by 361
Condition monitoring of electrical machines
Tavner, P., & Penman, J. (1987) · Durham Research Online (Durham University) · Cited by 353
Nandi, S., Ahmed, S., & Toliyat, H. A. (2001) · IEEE Transactions on Energy Conversion · doi:10.1109/60.937205 · Cited by 340
Self-citationBasic vibration signal processing for bearing fault detection
McInerny, S. A., & Dai, Y. (2003) · IEEE Transactions on Education · doi:10.1109/te.2002.808234 · Cited by 321
A new approach to on-line turn fault detection in AC motors
Kliman, G. B., Premerlani, W. J., Koegl, R. A., & Hoeweler, D. (2002) · IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting · doi:10.1109/ias.1996.557113 · Cited by 303
Nandi, S., Ahmed, S., & Toliyat, H. (2001) · IEEE Power Engineering Review · doi:10.1109/mper.2001.4311622 · Cited by 298
Self-citationVas, P. (1999) · Medical Entomology and Zoology · Cited by 295
Al-Nuaim, N. A., & Toliyat, H. (1998) · IEEE Transactions on Energy Conversion · doi:10.1109/60.678979 · Cited by 269
Self-citationAn unsupervised, on-line system for induction motor fault detection using stator current monitoring
Schoen, R. R., Lin, B. K., Habetler, T. G., Schlag, J. H., & Farag, S. (2002) · Proceedings of 1994 IEEE Industry Applications Society Annual Meeting · doi:10.1109/ias.1994.345492 · Cited by 264
Performance analysis of a three-phase induction motor under mixed eccentricity condition
Nandi, S., Bharadwaj, R. M., & Toliyat, H. A. (2002) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2002.801995 · Cited by 245
Self-citationAn unsupervised, on-line system for induction motor fault detection using stator current monitoring
Schoen, R. R., Lin, B. K., Habetler, T. G., Schlag, J. H., & Farag, S. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.475698 · Cited by 239
A method for dynamic simulation of air-gap eccentricity in induction machines
Toliyat, H. A., Arefeen, M. S., & Parlos, A. G. (1996) · IEEE Transactions on Industry Applications · doi:10.1109/28.511649 · Cited by 227
Self-citationA novel approach for broken-rotor-bar detection in cage induction motors
Milimonfared, J., Kelk, H. M., Nandi, S., Minassians, A. D., & Toliyat, H. A. (1999) · IEEE Transactions on Industry Applications · doi:10.1109/28.793359 · Cited by 219
Self-citationNeural networks aided on-line diagnostics of induction motor rotor faults
Filippetti, F., Franceschini, G., & Tassoni, C. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.395301 · Cited by 216
Induction motor fault diagnosis based on neuropredictors and wavelet signal processing
Kim, K., & Parlos, A. G. (2002) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2002.1011258 · Cited by 212
Diagnosis of Stator Inter-Turn Short Circuits in DTC Induction Motor Drives
Cruz, S. M. A., & Cardoso, A. J. M. (2004) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2004.834012 · Cited by 185
Induction motor stator faults diagnosis by a current concordia pattern-based fuzzy decision system
Zidani, F., El Hachemi Benbouzid, M., Diallo, D., & Nait-Said, M. S. (2003) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2003.815832 · Cited by 183
Induction machine condition monitoring with higher order spectra
Arthur, N., & Penman, J. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873211 · Cited by 170
Online stator fault diagnosis in inductionmotors
Arkan, M., Perović, D. K., & Unsworth, P. (2001) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20010588 · Cited by 164
Nandi, S., & Toliyat, H. A. (2002) · IEEE Transactions on Industry Applications · doi:10.1109/28.980363 · Cited by 160
Self-citationComparative investigation of diagnostic media for induction motors: a case of rotor cage faults
Trzynadlowski, A. M., & Ritchie, E. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873218 · Cited by 152
Chow, M. (1997) · WORLD SCIENTIFIC eBooks · doi:10.1142/9789812819383 · Cited by 144
Briz, F., Degner, M. W., Zamarrón, A., & Guerrero, J. M. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.813746 · Cited by 132
Condition monitoring of electrical drives
Penman, J., Dey, M. N., Tait, A. J., & Bryan, W. E. (1986) · IEE Proceedings B Electric Power Applications · doi:10.1049/ip-b.1986.0019 · Cited by 127
Alternatives for assessing the electrical integrity of induction motors
Kohler, J. L., Sottile, J., & Trutt, F. C. (1992) · IEEE Transactions on Industry Applications · doi:10.1109/28.158836 · Cited by 109
Stone, G. C., & Kapler, J. (1998) · IEEE Industry Applications Magazine · doi:10.1109/2943.715501 · Cited by 101
Ferrah, A., Hogben-Laing, P. J., Bradley, K. J., et al. (2002) · Conference record · doi:10.1109/ias.1997.643018 · Cited by 100
Sensorless fault diagnosis of induction motors
Kim, K., Parlos, A. G., & Bharadwaj, R. M. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.817693 · Cited by 81
Bangura, J. F., Povinelli, R. J., Demerdash, N. A., & Brown, R. H. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.814582 · Cited by 71
A model of asynchronous machines for stator fault detection and isolation
Chang, X., Cocquempot, V., & Christophe, C. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.812471 · Cited by 71
Induction motor fault detection by space vector angular fluctuation
Kostic-Perovic, D., Arkan, M., & Unsworth, P. J. (2002) · doi:10.1109/ias.2000.881140 · Cited by 70
The detection of interturn short circuits in the stator windings of operating motors
Joksimović, G., & Penman, J. (2002) · Proceedings of the Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.1998.724020 · Cited by 66
Cruz, S. M. A., Cardoso, A. J. M., & Toliyat, H. A. (2004) · Conference record · doi:10.1109/ias.2003.1257725 · Cited by 65
Self-citationPenman, J., & Yin, C. M. (1994) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:19941263 · Cited by 63
Povinelli, R. J., Bangura, J. F., Demerdash, N. A., et al. (2002) · IEEE Transactions on Energy Conversion · doi:10.1109/60.986435 · Cited by 53
Povinelli, R. J., Bangura, J. F., Demerdash, N. A., et al. (2002) · IEEE Power Engineering Review · doi:10.1109/mper.2002.4311988 · Cited by 50
Müller, G., & Landy, C. F. (2003) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2002.808338 · Cited by 48
Field Harmonics in Induction Motors
Liwschitz, M. M. (1942) · Transactions of the American Institute of Electrical Engineers · doi:10.1109/t-aiee.1942.5058444 · Cited by 45
Broken rotor bars: their effect on thetransient performanceof induction machines
Penman, J., & Stavrou, A. (1996) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:19960777 · Cited by 36
An adaptive, on-line, statistical method for bearing fault detection using stator current
Yazici, B., Kliman, G. B., Premerlani, W. J., et al. (2002) · Conference record · doi:10.1109/ias.1997.643030 · Cited by 31
Research works printed but not linked: 32
- Kliman, Induction motor fault detection via passive current monitoring, 13
- 10.1109/28.720444 · doi:10.1109/28.720444
- 10.1109/LPEL.2003.814607 · doi:10.1109/lpel.2003.814607
- Williamson, 1995, Analysis of cage induction motor with stator winding faults, IEEE Trans. Energy Convers., 10, 241, 10.1109/60.391888 · DOI · Paper page
- Collamati, Induction motor stator fault on-line diagnosis based on labview environment, 1, 495
- Diste, Using temperature, voltage, and/or, speed measurements to improve trending of induction motor rms currents in process control and diagnostics, 1, 312
- 10.1109/IEMDC.1999.769110 · doi:10.1109/iemdc.1999.769110
- 10.1109/IAS.2003.1257724 · doi:10.1109/ias.2003.1257724
- Nandi, Performance analysis of a three phase induction motor under abnormal operating conditions, 54
- 10.1109/TIA.1986.4504850 · doi:10.1109/tia.1986.4504850
- Thomson, On-line current monitoring for fault diagnosis in inverter fed induction motors, 432
- 10.1109/IAS.1996.557105 · doi:10.1109/ias.1996.557105
- 10.1109/28.120226 · doi:10.1109/28.120226
- Gaydon, An instrument to detect induction motor rotor circuit defects by speed fluctuation measurements, 5
- 10.1109/28.137460 · doi:10.1109/28.137460
- 10.1109/IAS.1994.345493 · doi:10.1109/ias.1994.345493
- 10.1109/60.969469 · doi:10.1109/60.969469
- 10.1109/60.849115 · doi:10.1109/60.849115
- 10.1109/TPAS.1984.318634 · doi:10.1109/tpas.1984.318634
- 10.1109/60.282486 · doi:10.1109/60.282486
- Walliser, 1994, The existence of large inter-bar currents in three phase squirrel cage motors with rotor-bar and/or end-ring faults, IEEE Trans. Energy Convers., 9, 159, 10.1109/60.282487 · doi:10.1109/60.282487
- Heller, 1977, Harmonic Field Effects in Induction Machine
- 10.1109/IAS.1997.643016 · doi:10.1109/ias.1997.643016
- Alger, 1965, The Nature of Induction Machines
- Kron, 1951, Equivalent Circuits of Electric Machinery
- 10.1109/28.245712 · doi:10.1109/28.245712
- 10.1109/IECON.2001.976551 · doi:10.1109/iecon.2001.976551
- 10.1109/TEC.2003.811734 · doi:10.1109/tec.2003.811734
- 10.1109/IAS.2000.881153 · doi:10.1109/ias.2000.881153
- 10.1109/28.62371 · doi:10.1109/28.62371
- 10.1109/IAS.1993.298942 · doi:10.1109/ias.1993.298942
- 10.1142/3596 · doi:10.1142/3596
Cited by
Gao, Z., Cecati, C., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2417501 · Cited by 3,135
Advances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140
A survey on deep learning based bearing fault diagnosis
Hoang, D.-T., & Kang, H.-J. (2019) · Neurocomputing · doi:10.1016/j.neucom.2018.06.078 · Cited by 866
A review on signal processing techniques utilized in the fault diagnosis of rolling element bearings
Rai, A., & Upadhyay, S. H. (2016) · Tribology International · doi:10.1016/j.triboint.2015.12.037 · Cited by 804
Ben Ali, J., Fnaiech, N., Saidi, L., Chebel-Morello, B., & Fnaiech, F. (2015) · Applied Acoustics · doi:10.1016/j.apacoust.2014.08.016 · Cited by 768
Metadata
- Authors
- Nandi, S., Toliyat, H. A., & Li, X.
- Venue
- IEEE Transactions on Energy Conversion
- Published
- 2005-12
- Volume
- 20
- Issue
- 4
- Pages
- 719-729
- ISSN
- 0885-8969 (ISSN-L)
- OpenAlex
- W2488793338
- Cited by
- 2,382
- References
- 55
- FWCI
- 92.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.