The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review
Abstract
Recently, research has picked up a fervent pace in the area of fault diagnosis of electrical machines. The manufacturers and users of these drives are now keen to include diagnostic features in the software to improve salability and reliability. Apart from locating specific harmonic components in the line current (popularly known as motor current signature analysis), other signals, such as speed, torque, noise, vibration etc., are also explored for their frequency contents. Sometimes, altogether different techniques, such as thermal measurements, chemical analysis, etc., are also employed to find out the nature and the degree of the fault. In addition, human involvement in the actual fault detection decision making is slowly being replaced by automated tools, such as expert systems, neural networks, fuzzy-logic-based systems; to name a few. It is indeed evident that this area is vast in scope. Hence, keeping in mind the need for future research, a review paper describing different types of faults and the signatures they generate and their diagnostics' schemes will not be entirely out of place. In particular, such a review helps to avoid repetition of past work and gives a bird's eye view to a new researcher in this area.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review of induction motors signature analysis as a medium for faults detection
El Hachemi Benbouzid, M. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873206 · Cited by 1,602
Motor bearing damage detection using stator current monitoring
Schoen, R. R., Habetler, T. G., Kamran, F., & Bartfield, R. G. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.475697 · Cited by 761
Parameter Estimation, Condition Monitoring, and Diagnosis of Electrical Machines
Vas, P. (1992) · doi:10.1093/oso/9780198593751.001.0001 · Cited by 711
Motor bearing damage detection using stator current monitoring
Schoen, R. R., Habetler, T. G., Kamran, F., & Bartheld, R. G. (2002) · Proceedings of 1994 IEEE Industry Applications Society Annual Meeting · doi:10.1109/ias.1994.345491 · Cited by 638
Noninvasive detection of broken rotor bars in operating induction motors
Kliman, G. B., Koegl, R. A., Stein, J., Endicott, R. D., & Madden, M. W. (1988) · IEEE Transactions on Energy Conversion · doi:10.1109/60.9364 · Cited by 525
Vibration and current monitoring for detecting airgap eccentricity in large induction motors
Cameron, J. R., Thomson, W. T., & Dow, A. B. (1986) · IEE Proceedings B Electric Power Applications · doi:10.1049/ip-b.1986.0022 · Cited by 512
Recent developments of induction motor drives fault diagnosis using AI techniques
Filippetti, F., Franceschini, G., Tassoni, C., & Vas, P. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873207 · Cited by 511
Transient analysis of cage induction machines under stator, rotor bar and end ring faults
Toliyat, H. A., & Lipo, T. A. (1995) · IEEE Transactions on Energy Conversion · doi:10.1109/60.391888 · Cited by 489
Self-citationWhat stator current processing-based technique to use for induction motor rotor faults diagnosis?
Benbouzid, M. E. H., & Kliman, G. B. (2003) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2003.811741 · Cited by 485
Dorrell, D. G., Thomson, W. T., & Roach, S. (1997) · IEEE Transactions on Industry Applications · doi:10.1109/28.567073 · Cited by 450
Research works printed but not linked: 32
- Kliman, Induction motor fault detection via passive current monitoring, 13
- 10.1109/28.720444 · doi:10.1109/28.720444
- 10.1109/LPEL.2003.814607 · doi:10.1109/lpel.2003.814607
- Williamson, 1995, Analysis of cage induction motor with stator winding faults, IEEE Trans. Energy Convers., 10, 241, 10.1109/60.391888 · DOI · Paper page
- Collamati, Induction motor stator fault on-line diagnosis based on labview environment, 1, 495
- Diste, Using temperature, voltage, and/or, speed measurements to improve trending of induction motor rms currents in process control and diagnostics, 1, 312
- 10.1109/IEMDC.1999.769110 · doi:10.1109/iemdc.1999.769110
- 10.1109/IAS.2003.1257724 · doi:10.1109/ias.2003.1257724
- Nandi, Performance analysis of a three phase induction motor under abnormal operating conditions, 54
- 10.1109/TIA.1986.4504850 · doi:10.1109/tia.1986.4504850
- Thomson, On-line current monitoring for fault diagnosis in inverter fed induction motors, 432
- 10.1109/IAS.1996.557105 · doi:10.1109/ias.1996.557105
- 10.1109/28.120226 · doi:10.1109/28.120226
- Gaydon, An instrument to detect induction motor rotor circuit defects by speed fluctuation measurements, 5
- 10.1109/28.137460 · doi:10.1109/28.137460
- 10.1109/IAS.1994.345493 · doi:10.1109/ias.1994.345493
- 10.1109/60.969469 · doi:10.1109/60.969469
- 10.1109/60.849115 · doi:10.1109/60.849115
- 10.1109/TPAS.1984.318634 · doi:10.1109/tpas.1984.318634
- 10.1109/60.282486 · doi:10.1109/60.282486
- Walliser, 1994, The existence of large inter-bar currents in three phase squirrel cage motors with rotor-bar and/or end-ring faults, IEEE Trans. Energy Convers., 9, 159, 10.1109/60.282487 · doi:10.1109/60.282487
- Heller, 1977, Harmonic Field Effects in Induction Machine
- 10.1109/IAS.1997.643016 · doi:10.1109/ias.1997.643016
- Alger, 1965, The Nature of Induction Machines
- Kron, 1951, Equivalent Circuits of Electric Machinery
- 10.1109/28.245712 · doi:10.1109/28.245712
- 10.1109/IECON.2001.976551 · doi:10.1109/iecon.2001.976551
- 10.1109/TEC.2003.811734 · doi:10.1109/tec.2003.811734
- 10.1109/IAS.2000.881153 · doi:10.1109/ias.2000.881153
- 10.1109/28.62371 · doi:10.1109/28.62371
- 10.1109/IAS.1993.298942 · doi:10.1109/ias.1993.298942
- 10.1142/3596 · doi:10.1142/3596
Cited by
Gao, Z., Cecati, C., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2417501 · Cited by 3,135
Lessmeier, C., Kimotho, J. K., Zimmer, D., & Sextro, W. (2016) · PHM Society European Conference · doi:10.36001/phme.2016.v3i1.1577 · Cited by 1,268
Advances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140
A survey on deep learning based bearing fault diagnosis
Hoang, D.-T., & Kang, H.-J. (2019) · Neurocomputing · doi:10.1016/j.neucom.2018.06.078 · Cited by 866
A review on signal processing techniques utilized in the fault diagnosis of rolling element bearings
Rai, A., & Upadhyay, S. H. (2016) · Tribology International · doi:10.1016/j.triboint.2015.12.037 · Cited by 804
Ben Ali, J., Fnaiech, N., Saidi, L., Chebel-Morello, B., & Fnaiech, F. (2015) · Applied Acoustics · doi:10.1016/j.apacoust.2014.08.016 · Cited by 768
From Model, Signal to Knowledge: A Data-Driven Perspective of Fault Detection and Diagnosis
Dai, X., & Gao, Z. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2013.2243743 · Cited by 728
Data-Driven Methods for Predictive Maintenance of Industrial Equipment: A Survey
Zhang, W., Yang, D., & Wang, H. (2019) · IEEE Systems Journal · doi:10.1109/jsyst.2019.2905565 · Cited by 732
A Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2090839 · Cited by 706
Disturbance/Uncertainty Estimation and Attenuation Techniques in PMSM Drives—A Survey
Yang, J., Chen, W.-H., Li, S., Guo, L., & Yan, Y. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2583412 · Cited by 695
Gangsar, P., & Tiwari, R. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106908 · Cited by 605
A Review of Stator Fault Monitoring Techniques of Induction Motors
Siddique, A., Yadava, G. S., & Singh, B. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2004.837304 · Cited by 591
Zhang, X., Liang, Y., Zhou, J., & zang, Y. (2015) · Measurement · doi:10.1016/j.measurement.2015.03.017 · Cited by 586
A Survey on Wind Turbine Condition Monitoring and Fault Diagnosis—Part I: Components and Subsystems
Qiao, W., & Lu, D. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2422112 · Cited by 533
Review of condition monitoring of rotating electrical machines
Tavner, P. J. (2008) · IET Electric Power Applications · doi:10.1049/iet-epa:20070280 · Cited by 531
A survey of condition monitoring and protection methods for medium voltage induction motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2009) · 2009 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2009.5316083 · Cited by 524
Wang, Y., Xiang, J., Markert, R., & Liang, M. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.04.039 · Cited by 504
Ben Ali, J., Chebel-Morello, B., Saidi, L., Malinowski, S., & Fnaiech, F. (2015) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2014.10.014 · Cited by 502
A novel intelligent diagnosis method using optimal LS-SVM with improved PSO algorithm
Deng, W., Yao, R., Zhao, H., Yang, X., & Li, G. (2019) · Soft Computing · doi:10.1007/s00500-017-2940-9 · Cited by 490
Tian, J., Morillo, C., Azarian, M. H., & Pecht, M. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2509913 · Cited by 488
A Bidirectional LSTM Prognostics Method Under Multiple Operational Conditions
Huang, C.-G., Huang, H.-Z., & Li, Y.-F. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2891463 · Cited by 476
Rolling element bearing fault diagnosis using convolutional neural network and vibration image
Hoang, D.-T., & Kang, H.-J. (2019) · Cognitive Systems Research · doi:10.1016/j.cogsys.2018.03.002 · Cited by 450
Fakhar Manesh, M., Pellegrini, M. M., Marzi, G., & Dabic, M. (2021) · IEEE Transactions on Engineering Management · doi:10.1109/tem.2019.2963489 · Cited by 431
Motor Bearing Fault Diagnosis Using Trace Ratio Linear Discriminant Analysis
Jin, X., Zhao, M., Chow, T. W. S., & Pecht, M. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2273471 · Cited by 423
Limited Data Rolling Bearing Fault Diagnosis With Few-Shot Learning
Zhang, A., Li, S., Cui, Y., Yang, W., Dong, R., & Hu, J. (2019) · IEEE Access · doi:10.1109/access.2019.2934233 · Cited by 419
A Review of Fault Detection and Diagnosis for the Traction System in High-Speed Trains
Chen, H., & Jiang, B. (2020) · IEEE Transactions on Intelligent Transportation Systems · doi:10.1109/tits.2019.2897583 · Cited by 413
Immovilli, F., Bellini, A., Rubini, R., & Tassoni, C. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2049623 · Cited by 382
Research Review for Broad Learning System: Algorithms, Theory, and Applications
Gong, X., Zhang, T., Chen, C. L. P., & Liu, Z. (2022) · IEEE Transactions on Cybernetics · doi:10.1109/tcyb.2021.3061094 · Cited by 350
A Time Series Transformer based method for the rotating machinery fault diagnosis
Jin, Y., Hou, L., & Chen, Y. (2022) · Neurocomputing · doi:10.1016/j.neucom.2022.04.111 · Cited by 336
Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges
Orlowska-Kowalska, T., Wolkiewicz, M., Pietrzak, P., Skowron, M., Ewert, P., Tarchala, G., Krzysztofiak, M., & Kowalski, C. T. (2022) · IEEE Access · doi:10.1109/access.2022.3180153 · Cited by 328
A High-Resolution Frequency Estimation Method for Three-Phase Induction Machine Fault Detection
Kia, S. H., Henao, H., & Capolino, G.-A. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.899826 · Cited by 325
Deep Learning-Based Intelligent Fault Diagnosis Methods Toward Rotating Machinery
Tang, S., Yuan, S., & Zhu, Y. (2020) · IEEE Access · doi:10.1109/access.2019.2963092 · Cited by 323
Review of Automatic Fault Diagnosis Systems Using Audio and Vibration Signals
Henriquez, P., Alonso, J. B., Ferrer, M. A., & Travieso, C. M. (2014) · IEEE Transactions on Systems, Man, and Cybernetics: Systems · doi:10.1109/tsmcc.2013.2257752 · Cited by 314
Few-shot transfer learning for intelligent fault diagnosis of machine
Wu, J., Zhao, Z., Sun, C., Yan, R., & Chen, X. (2020) · Measurement · doi:10.1016/j.measurement.2020.108202 · Cited by 302
A physics-informed deep learning approach for bearing fault detection
Shen, S., Lu, H., Sadoughi, M., Hu, C., Nemani, V., Thelen, A., Webster, K., Darr, M., Sidon, J., & Kenny, S. (2021) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2021.104295 · Cited by 293
From Corrective to Predictive Maintenance—A Review of Maintenance Approaches for the Power Industry
Molęda, M., Małysiak-Mrozek, B., Ding, W., Sunderam, V., & Mrozek, D. (2023) · Sensors · doi:10.3390/s23135970 · Cited by 288
Leite, V. C. M. N., Borges da Silva, J. G., Veloso, G. F. C., Borges da Silva, L. E., Lambert-Torres, G., Bonaldi, E. L., & de Lacerda de Oliveira, L. E. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2345330 · Cited by 274
Vibration analysis for bearing fault detection and classification using an intelligent filter
Zarei, J., Tajeddini, M. A., & Karimi, H. R. (2014) · Mechatronics · doi:10.1016/j.mechatronics.2014.01.003 · Cited by 269
Chen, J., Huang, R., Chen, Z., Mao, W., & Li, W. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2023.110239 · Cited by 267
Riera-Guasp, M., Antonino-Daviu, J. A., Pineda-Sanchez, M., Puche-Panadero, R., & Perez-Cruz, J. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2004378 · Cited by 267
Wang, X., Wang, Z., Xu, Z., Cheng, M., Wang, W., & Hu, Y. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2876400 · Cited by 263
Espinosa, A. G., Rosero, J. A., Cusido, J., Romeral, L., & Ortega, J. A. (2010) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2009.2037922 · Cited by 243
Fault-tolerant control in variable speed drives: a survey
Campos-Delgado, D. U., Espinoza-Trejo, D. R., & Palacios, E. (2008) · IET Electric Power Applications · doi:10.1049/iet-epa:20070203 · Cited by 228
AlShorman, O., Irfan, M., Saad, N., Zhen, D., Haider, N., Glowacz, A., & AlShorman, A. (2020) · Shock and Vibration · doi:10.1155/2020/8843759 · Cited by 215
Duan, Z., Wu, T., Guo, S., Shao, T., Malekian, R., & Li, Z. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1474-8 · Cited by 196
Faults and Diagnosis Methods of Permanent Magnet Synchronous Motors: A Review
Chen, Y., Liang, S., Li, W., Liang, H., & Wang, C. (2019) · Applied Sciences · doi:10.3390/app9102116 · Cited by 194
Choi, S., Haque, M. S., Tarek, M. T. B., Mulpuri, V., Duan, Y., Das, S., Garg, V., Ionel, D. M., Masrur, M. A., Mirafzal, B., et al. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2819627 · Cited by 192
Self-citationGiantomassi, A., Ferracuti, F., Iarlori, S., Ippoliti, G., & Longhi, S. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2370936 · Cited by 168
Rajagopalan, S., Roux, W. L., Habetler, T. G., & Harley, R. G. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.904183 · Cited by 164
Cost-Effective Three-Phase PMSM Drive Tolerant to Open-Phase Fault
Kontarcek, A., Bajec, P., Nemec, M., Ambrozic, V., & Nedeljkovic, D. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2437357 · Cited by 106
Da, Y., Shi, X., & Krishnamurthy, M. (2011) · 2011 IEEE Vehicle Power and Propulsion Conference · doi:10.1109/vppc.2011.6043248 · Cited by 96
Zhou, J., Qin, Y., Luo, J., & Zhu, T. (2023) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2022.3218665 · Cited by 98
Moosavi, S. S., Djerdir, A., Amirat, Y. A., & Khaburi, D. A. (2015) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2015.04.062 · Cited by 96
Gurusamy, V., Bostanci, E., Li, C., Qi, Y., & Akin, B. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.3013128 · Cited by 93
Synchronous Demodulation of Control Voltages for Stator Interturn Fault Detection in PMSM
Boileau, T., Leboeuf, N., Nahid-Mobarakeh, B., & Meibody-Tabar, F. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2254132 · Cited by 90
Wu, F., & Zhao, J. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2587339 · Cited by 82
Climente-Alarcon, V., Antonino-Daviu, J. A., Riera-Guasp, M., Puche-Panadero, R., & Escobar, L. (2012) · Electric Power Systems Research · doi:10.1016/j.epsr.2012.05.001 · Cited by 78
Bhuiyan, E. A., Akhand, M. M. A., Das, S. K., Ali, M. F., Tasneem, Z., Islam, M. R., Saha, D. K., Badal, F. R., Ahamed, M. H., & Moyeen, S. I. (2020) · International Journal of Automation and Computing · doi:10.1007/s11633-020-1250-3 · Cited by 68
Study on the Permanent Magnet Demagnetization Fault in Permanent Magnet Synchronous Machines
Rosero, J. A., Cusido, J., Garcia, A., Ortega, J. A., & Romeral, L. (2006) · IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics · doi:10.1109/iecon.2006.347598 · Cited by 67
Wang, X., Lu, S., Huang, W., Wang, Q., Zhang, S., & Xia, M. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3051668 · Cited by 65
He, Y.-L., Wang, R., Kwong, S., & Wang, X.-Z. (2014) · Information Sciences · doi:10.1016/j.ins.2013.09.003 · Cited by 64
On the short-circuiting Fault Detection in a PMSM by means of Stator Current Transformations
Rosero, J. A., Romeral, L., Cusido, J., Garcia, A., & Ortega, J. A. (2007) · 2007 IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.2007.4342300 · Cited by 63
Rosero, J., Romeral, J. L., Cusido, J., Ortega, J. A., & Garcia, A. (2008) · 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2008.4522708 · Cited by 44
Hang, J., Zhang, J., Cheng, M., & Wang, Z. (2013) · 2013 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2013.6647169 · Cited by 36
Change‐detection algorithm for short‐circuit fault detection in closed‐loop AC drives
Meinguet, F., Semail, E., Kestelyn, X., Mollet, Y., & Gyselinck, J. (2014) · IET Electric Power Applications · doi:10.1049/iet-epa.2012.0316 · Cited by 34
Krzysztofiak, M., Skowron, M., & Orlowska-Kowalska, T. (2020) · Energies · doi:10.3390/en14010153 · Cited by 33
Wang, B., Wang, J., Griffo, A., & Huang, L. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2908595 · Cited by 33
Karami, M., Mariun, N., Rezazadeh Mehrjou, M., Ab Kadir, M. Z. A., Misron, N., & Mohd Radzi, M. A. (2014) · Mathematical Problems in Engineering · doi:10.1155/2014/132647 · Cited by 31
An effective method for detection of stator fault in PMSM with 1D-LBP
Mi̇naz, M. R. (2020) · ISA Transactions · doi:10.1016/j.isatra.2020.07.013 · Cited by 23
Stator Short Circuits Detection in PMSM by means of Higher Order Spectral Analysis (HOSA)
Rosero, J., Ortega, J., Urresty, J., Cardenas, J., & Romeral, L. (2009) · 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2009.4802779 · Cited by 22
Bonci, A., Fredianelli, L., Kermenov, R., Longarini, L., Longhi, S., Pompei, G., Prist, M., & Verdini, C. (2024) · Applied Sciences · doi:10.3390/app14198686 · Cited by 16
Modelling and detection of bearing faults in Permanent Magnet Synchronous Motors
Rezig, A., N'Diaye, A., Mekideche, M. R., & Djerdir, A. (2012) · 2012 XXth International Conference on Electrical Machines · doi:10.1109/icelmach.2012.6350122 · Cited by 10
Metadata
- Authors
- Nandi, S., Toliyat, H. A., & Li, X.
- Venue
- IEEE Transactions on Energy Conversion
- Published
- 2005-12
- Volume
- 20
- Issue
- 4
- Pages
- 719-729
- ISSN
- 0885-8969 (ISSN-L)
- OpenAlex
- W2488793338
- Cited by
- 2,382
- References
- 55
- FWCI
- 92.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.