The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Spatiotemporal Model Reduction of Inverter-Based Islanded Microgrids
Abstract
Computationally efficient and scalable models that describe droop-controlled inverter dynamics are key to modeling, analysis, and control in islanded microgrids. Typical models developed from first principles in this domain describe detailed dynamics of the power electronics inverters, as well as the network interactions. Consequently, these models are very involved; they offer limited analytical insights and are computationally expensive when applied to investigate the dynamics of large microgrids with many inverters. This calls for the development of reduced-order models that capture the relevant dynamics of higher order models with a lower dimensional state space while not compromising modeling fidelity. To this end, this paper proposes model-reduction methods based on singular perturbation and Kron reduction to reduce large-signal dynamic models of inverter-based islanded microgrids in temporal and spatial aspects, respectively. The reduced-order models are tested in a modified IEEE 37-bus system and verified to accurately describe the original dynamics with lower computational burden. In addition, we demonstrate that Kron reduction isolates the mutual inverter interactions and the equivalent loads that the inverters have to support in the microgrid - this aspect is leveraged in the systematic selection of droop coefficients to minimize power losses and voltage deviations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Guerrero, J. M., Vasquez, J. C., Matas, J., de Vicuna, L. G., & Castilla, M. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2066534 · Cited by 5,075
Horn, R. A., & Johnson, C. R. (2012) · doi:10.1017/cbo9781139020411 · Cited by 4,642
Cited by
Foundations and Challenges of Low-Inertia Systems (Invited Paper)
Milano, F., Dörfler, F., Hug, G., Hill, D. J., & Verbič, G. (2018) · 2018 Power Systems Computation Conference (PSCC) · doi:10.23919/pscc.2018.8450880 · Cited by 1,039
A survey on modeling of microgrids—From fundamental physics to phasors and voltage sources
Schiffer, J., Zonetti, D., Ortega, R., Stanković, A. M., Sezi, T., & Raisch, J. (2016) · Automatica · doi:10.1016/j.automatica.2016.07.036 · Cited by 254
Metadata
- Authors
- Luo, L., & Dhople, S. V.
- Venue
- IEEE Transactions on Energy Conversion
- Published
- 2014-12
- Volume
- 29
- Issue
- 4
- Pages
- 823-832
- ISSN
- 0885-8969 (ISSN-L)
- 1558-0059
- OpenAlex
- W1965999924
- Cited by
- 165
- References
- 2
- FWCI
- 9.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.