The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Mitigation of Turn-to-Turn Faults in Fault Tolerant Permanent Magnet Synchronous Motors
Abstract
This study presents a method to mitigate and alleviate the effects produced by a turn-to-turn short in a fault tolerant permanent magnet synchronous motor with single-layer concentrated windings. The rotor magnets are capable of inducing a high voltage across the fault contact point; this voltage has the potential to generate a high circulating current that promotes the rapid propagation of the fault due to the thermal stress created by the increased localized fault power losses. The scope of this study is for applications where postfault operation is desired, even if it means operating at reduced power capacity and lower speeds. Upon quick detection of a fault, the proposed technique can be used to decelerate the propagation of the fault and extend the machine's postfault life span. The technique consists of a magnetic field-weakening strategy at speeds below nominal, to reduce the voltage induced in the faulted portion. The concept is validated through finite element analysis, modeling, and experimental data. It is demonstrated that the proposed technique reduces the fault current magnitude and winding temperature.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The proposed technique can be used to slow down the damage spreading out and extend the service life of the machine after a failure.”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [329]
In the citing paper
“This method consists in a field-weakening strategy at speeds below nominal, to reduce the voltage induced in the faulted part of the winding.”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [329]
Citations
Cites
Electric Motor Drives: Modeling, Analysis, and Control
Krishnan, R. (2001) · Cited by 1,340
Welchko, B. A., Lipo, T. A., Jahns, T. M., & Schulz, S. E. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.830074 · Cited by 724
Recent Advances in Modeling and Online Detection of Stator Interturn Faults in Electrical Motors
Gandhi, A., Corrigan, T., & Parsa, L. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2089937 · Cited by 544
Experimental fault-tolerant control of a PMSM drive
Bolognani, S., Zordan, M., & Zigliotto, M. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873223 · Cited by 382
Identification of Machine Parameters of a Synchronous Motor
Rahman, K. M., & Hiti, S. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.844379 · Cited by 276
IPM synchronous machine drive response to symmetrical and asymmetrical short circuit faults
Welchko, B. A., Jahns, T. M., Soong, W. L., et al. (2003) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2003.811746 · Cited by 210
Control Algorithms for a Fault-Tolerant PMSM Drive
Wallmark, O., Harnefors, L., & Carlson, O. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.895076 · Cited by 202
Parameter Estimation for Condition Monitoring of PMSM Stator Winding and Rotor Permanent Magnets
Liu, K., Zhu, Z. Q., & Stone, D. A. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2238874 · Cited by 196
Sarikhani, A., & Mohammed, O. A. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2222857 · Cited by 177
Cheng, S., Zhang, P., & Habetler, T. G. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2064276 · Cited by 152
Research works printed but not linked: 2
- 0, Theory and Design of Fractional-Slot PM Machines
- 10.1109/ICPE.2011.5944430 · DOI
Cited by
Sorted by citations
Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges
Orlowska-Kowalska, T., Wolkiewicz, M., Pietrzak, P., Skowron, M., Ewert, P., Tarchala, G., Krzysztofiak, M., & Kowalski, C. T. (2022) · IEEE Access · doi:10.1109/access.2022.3180153 · Cited by 328
Fault-Tolerant Control of PMSM With Inter-Turn Short-Circuit Fault
Zhang, J., Zhan, W., & Ehsani, M. (2019) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2019.2936225 · Cited by 64
Jiang, Y., Zhang, Z., Jiang, W., Geng, W., & Huang, J. (2018) · IET Electric Power Applications · doi:10.1049/iet-epa.2017.0754 · Cited by 45
Wang, B., Wang, J., Griffo, A., & Huang, L. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2908595 · Cited by 33
Metadata
- Authors
- Cintron-Rivera, J. G., Foster, S. N., & Strangas, E. G.
- Affiliations
- Michigan State University (US)
- Venue
- IEEE Transactions on Energy Conversion
- Published
- 2015-06
- Volume
- 30
- Issue
- 2
- Pages
- 465-475
- ISSN
- 0885-8969 (ISSN-L)
- 1558-0059
- OpenAlex
- W2005580246
- Cited by
- 104
- References
- 41
- Citations by year
- 2025: 12 · 2024: 13 · 2023: 9 · 2022: 14 · 2021: 11 · 2020: 7 · 2019: 11 · 2018: 11 · 2017: 5 · 2016: 6 · 2015: 5
- FWCI
- 2.83
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Energy Conversion (publishedVersion)
- Funders
- National Science Foundation (EECS-1102316)
- Predoctoral Fellowship Project
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Motor Design and Analysis
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Sensorless Control of Electric Motors
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Keywords
- turn-to-turn faults, permanent magnet synchronous motor, fault tolerance, circulating current, fault propagation, winding temperature, fault current reduction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
