Global Identification of a Low-Order Lumped-Parameter Thermal Network for Permanent Magnet Synchronous Motors
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Monitoring critical temperatures in permanent magnet synchronous motors (PMSM) is essential to prevent device failures or excessive motor life-time reduction due to thermal stress. A lumped-parameter thermal network (LPTN) consisting of four nodes is designed to model the most important motor parts, i.e., the stator yoke, stator winding, stator teeth, and the permanent magnets. An empirical approach based on the comprehensive experimental training data and a particle swarm optimization are used to identify the LPTN parameters of a 60-kW automotive traction PMSM. Varying parameters and physically motivated constraints are taken into account to extend the model scope beyond the training data domain. Here, a so-called global identification technique for linear parameter-varying systems is innovatively applied to a thermal motor model for the first time. The model accuracy is cross-validated with independent load profiles, and a maximum estimation error (worst-case) of 8°C regarding all considered motor temperatures is achieved. Also, a comprehensive residual statistical analysis proves suitable estimation results in terms of model robustness and accuracy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kennedy, J., & Eberhart, R. (2002) · Proceedings of ICNN'95 - International Conference on Neural Networks · doi:10.1109/icnn.1995.488968 · Cited by 58,192
Cited by
Rafaq, M. S., & Jung, J.-W. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2944413 · Cited by 266
Thermal Parameter and State Estimation for Digital Twins of E-Powertrain Components
Rodriguez, B., Sanjurjo, E., Tranchero, M., Romano, C., & Gonzalez, F. (2021) · IEEE Access · doi:10.1109/access.2021.3094312 · Cited by 49
Metadata
- Authors
- Wallscheid, O., & Bocker, J.
- Venue
- IEEE Transactions on Energy Conversion
- Published
- 2016-03
- Volume
- 31
- Issue
- 1
- Pages
- 354-365
- ISSN
- 0885-8969 (ISSN-L)
- 1558-0059
- OpenAlex
- W2288981278
- Cited by
- 242
- References
- 1
- FWCI
- 3.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Global Identification of a Low-Order Lumped-Parameter Thermal Network for Permanent Magnet Synchronous Motors. https://app.cochat.ai/papers/10.1109/tec.2015.2473673
- The paper
- Wallscheid, O., & Bocker, J. (2016). Global Identification of a Low-Order Lumped-Parameter Thermal Network for Permanent Magnet Synchronous Motors. IEEE Transactions on Energy Conversion. https://doi.org/10.1109/tec.2015.2473673
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.