The DOI matches its Crossref record.
Fundamentals of silicon material properties for successful exploitation of strain engineering in modern CMOS manufacturing
Abstract
Semiconductor industry has increasingly resorted to strain as a means of realizing the required node-to-node transistor performance improvements. Straining silicon fundamentally changes the mechanical, electrical (band structure and mobility), and chemical (diffusion and activation) properties. As silicon is strained and subjected to high-temperature thermal processing, it undergoes mechanical deformations that create defects, which may significantly limit yield. Engineers have to manipulate these properties of silicon to balance the performance gains against defect generation. This paper will elucidate the current understanding and ongoing published efforts on all these critical properties in bulk strained silicon. The manifestation of these properties in CMOS transistor performance and designs that successfully harness strain is reviewed in the last section. Current manufacturable strained-silicon technologies are reviewed with particular emphasis on scalability. A detailed case study on recessed silicon germanium transistors illustrates the application of the fundamentals to optimal transistor design.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Ab initio calculation of ideal strength and phonon instability of graphene under tension
Liu, F., Ming, P., & Li, J. (2007) · Physical Review B · doi:10.1103/physrevb.76.064120 · Cited by 1,447
Zhu, T., & Li, J. (2010) · Progress in Materials Science · doi:10.1016/j.pmatsci.2010.04.001 · Cited by 828
Enhancing Electrocatalytic Water Splitting by Strain Engineering
You, B., Tang, M. T., Tsai, C., Abild‐Pedersen, F., Zheng, X., & Li, H. (2019) · Advanced Materials · doi:10.1002/adma.201807001 · Cited by 793
Physics of strain effects in semiconductors and metal-oxide-semiconductor field-effect transistors
Sun, Y., Thompson, S. E., & Nishida, T. (2007) · Journal of Applied Physics · doi:10.1063/1.2730561 · Cited by 521
Straus, D. B., & Kagan, C. R. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.8b00201 · Cited by 397
Piezoresistivity and Strain-induced Band Gap Tuning in Atomically Thin MoS2
Manzeli, S., Allain, A., Ghadimi, A., & Kis, A. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01689 · Cited by 385
Strain engineering in two-dimensional nanomaterials beyond graphene
Deng, S., Sumant, A. V., & Berry, V. (2018) · Nano Today · doi:10.1016/j.nantod.2018.07.001 · Cited by 369
Carrier-Transport-Enhanced Channel CMOS for Improved Power Consumption and Performance
Takagi, S., Iisawa, T., Tezuka, T., Numata, T., Nakaharai, S., Hirashita, N., Moriyama, Y., Usuda, K., Toyoda, E., Dissanayake, S., et al. (2008) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2007.911034 · Cited by 343
Metadata
- Authors
- Chidambaram, P. R., Bowen, C., Chakravarthi, S., Machala, C., & Wise, R.
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2006-05
- Volume
- 53
- Issue
- 5
- Pages
- 944-964
- ISSN
- 0018-9383 (ISSN-L)
- OpenAlex
- W2138463943
- Cited by
- 194
- References
- 0
- FWCI
- 14.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.