The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
The Changing Automotive Environment: High-Temperature Electronics
Abstract
The underhood automotive environment is harsh and current trends in the automotive electronics industry will be pushing the temperature envelope for electronic components. The desire to place engine control units on the engine and transmission control units either on or in the transmission will push the ambient temperature above 125/spl deg/C. However, extreme cost pressures, increasing reliability demands (10 year/241 350 km) and the cost of field failures (recalls, liability, customer loyalty) will make the shift to higher temperatures occur incrementally. The coolest spots on engine and in the transmission will be used. These large bodies do provide considerable heat sinking to reduce temperature rise due to power dissipation in the control unit. The majority of near term applications will be at 150/spl deg/C or less and these will be worst case temperatures, not nominal. The transition to X-by-wire technology, replacing mechanical and hydraulic systems with electromechanical systems will require more power electronics. Integration of power transistors and smart power devices into the electromechanical actuator will require power devices to operate at 175/spl deg/C to 200/spl deg/C. Hybrid electric vehicles and fuel cell vehicles will also drive the demand for higher temperature power electronics. In the case of hybrid electric and fuel cell vehicles, the high temperature will be due to power dissipation. The alternates to high-temperature devices are thermal management systems which add weight and cost. Finally, the number of sensors in vehicles is increasing as more electrically controlled systems are added. Many of these sensors must work in high-temperature environments. The harshest applications are exhaust gas sensors and cylinder pressure or combustion sensors. High-temperature electronics use in automotive systems will continue to grow, but it will be gradual as cost and reliability issues are addressed. This work examines the motivation for higher temperature operation, the packaging limitations even at 125/spl deg/C with newer package styles and concludes with a review of challenges at both the semiconductor device and packaging level as temperatures push beyond 125/spl deg/C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Expanding automotive electronic systems
Leen, G., & Heffernan, D. (2002) · Computer · doi:10.1109/2.976923 · Cited by 474
Wire Bonding in Microelectronics Materials, Processes, Reliability and Yield, 2nd Edition
Harman, G. G. (1997) · McGraw-Hill eBooks · Cited by 371
Application of MEMS technology in automotive sensors and actuators
Eddy, D. S., & Sparks, D. R. (1998) · Proceedings of the IEEE · doi:10.1109/5.704280 · Cited by 223
Temperature acceleration of time-dependent dielectric breakdown
Moazzami, R., Lee, J. C., & Hu, C. C. (1989) · IEEE Transactions on Electron Devices · doi:10.1109/16.43668 · Cited by 147
A hybrid 6H-SiC temperature sensor operational from 25°C to 500°C
Casady, J. B., Dillard, W. C., Johnson, W. R., & Rao, U. (1996) · IEEE Transactions on Components Packaging and Manufacturing Technology Part A · doi:10.1109/95.536843 · Cited by 45
High-temperature storage and thermal cycling studies of thick film and wirewound resistors
Naefe, J. E., Johnson, W. R., & Grzybowski, R. (2002) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/6144.991174 · Cited by 15
Cited by
A review of shape memory alloy research, applications and opportunities
Mohd Jani, J., Leary, M., Subic, A., & Gibson, M. A. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.11.084 · Cited by 4,078
Flexible high-temperature dielectric materials from polymer nanocomposites
Li, Q., Chen, L., Gadinski, M. R., Zhang, S., Zhang, G., Li, H. U., Iagodkine, E., Haque, A., Chen, L.-Q., Jackson, T. N., et al. (2015) · Nature · doi:10.1038/nature14647 · Cited by 2,133
Perovskite lead-free dielectrics for energy storage applications
Yang, L., Kong, X., Li, F., Hao, H., Cheng, Z., Liu, H., Li, J.-F., & Zhang, S. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.12.005 · Cited by 1,957
High-Temperature Dielectric Materials for Electrical Energy Storage
Li, Q., Yao, F.-Z., Liu, Y., Zhang, G., Wang, H., & Wang, Q. (2018) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070317-124435 · Cited by 881
Feng, Q.-K., Zhong, S.-L., Pei, J.-Y., Zhao, Y., Zhang, D.-L., Liu, D.-F., Zhang, Y.-X., & Dang, Z.-M. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00793 · Cited by 744
Metadata
- Authors
- Johnson, R. W., Evans, J. L., Jacobsen, P., Thompson, J. R. R., & Christopher, M.
- Venue
- IEEE Transactions on Electronics Packaging Manufacturing
- Published
- 2004-07
- Volume
- 27
- Issue
- 3
- Pages
- 164-176
- ISSN
- 1521-334X (ISSN-L)
- OpenAlex
- W2152677897
- Cited by
- 869
- References
- 6
- FWCI
- 8.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.