The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Building Height Retrieval From VHR SAR Imagery Based on an Iterative Simulation and Matching Technique
Abstract
Experimental airborne synthetic aperture radar (SAR) systems achieve spatial resolutions of approximately 10 cm, whereas the new spaceborne very high spatial resolution (VHR) SAR sensors onboard the TerraSAR-X and COSMO-SkyMed satellites achieve spatial resolutions down to 1 m. In VHR SAR data, features from individual urban structures (i.e., buildings) can be identified by their characteristic settings in urban settlement patterns. In this paper, we present a novel concept for the height estimation of generic man-made structures from single detected SAR data. The proposed approach is based on the definition of a hypothesis on the height of the building and on the simulation of a SAR image for testing that hypothesis. A matching procedure is applied between the estimated and the actual SAR image in order to test the height hypothesis. The process is iterated for different height assumptions until the matching function is optimized, and thus, the building height is estimated. The efficiency of the proposed method is demonstrated on a set of 40 flat- and gable-roof buildings using two submeter VHR airborne and two 1-m resolution TerraSAR-X SAR scenes all acquired from the same residential area in Dorsten, Germany. The results show that, in the absence of string disturbing effects, the method is able to estimate the height of flat- and gable-roof buildings in the submeter data to the order of a meter, while the accuracy for the meter resolution spaceborne data is lower but still sufficient to estimate the number of floors of a building.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Distinctive Image Features from Scale-Invariant Keypoints
Lowe, D. G. (2004) · International Journal of Computer Vision · doi:10.1023/b:visi.0000029664.99615.94 · Cited by 55,589
Yee, K. (1966) · IEEE Transactions on Antennas and Propagation · doi:10.1109/tap.1966.1138693 · Cited by 15,008
Multimodality image registration by maximization of mutual information
Maes, F., Collignon, A., Vandermeulen, D., Marchal, G., & Suetens, P. (1997) · IEEE Transactions on Medical Imaging · doi:10.1109/42.563664 · Cited by 4,547
Morphological Image Analysis: Principles and Applications
(2000) · Sensor Review · doi:10.1108/sr.2000.08720cae.001 · Cited by 3,537
Cited by
Earthquake Damage Assessment of Buildings Using VHR Optical and SAR Imagery
Brunner, D., Lemoine, G., & Bruzzone, L. (2010) · IEEE Transactions on Geoscience and Remote Sensing · doi:10.1109/tgrs.2009.2038274 · Cited by 586
Self-citationChen, T.-H. K., Qiu, C., Schmitt, M., Zhu, X. X., Sabel, C. E., & Prishchepov, A. V. (2020) · Remote Sensing of Environment · doi:10.1016/j.rse.2020.112096 · Cited by 104
Metadata
- Authors
- Brunner, D., Lemoine, G., Bruzzone, L., & Greidanus, H.
- Venue
- IEEE Transactions on Geoscience and Remote Sensing
- Published
- 2010-03
- Volume
- 48
- Issue
- 3
- Pages
- 1487-1504
- ISSN
- 0196-2892 (ISSN-L)
- 1558-0644
- OpenAlex
- W2129348473
- Cited by
- 169
- References
- 4
- FWCI
- 16.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.