The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Supercapacitor Energy Storage for Wind Energy Applications
Abstract
As wind energy reaches higher penetration levels, there is a greater need to manage intermittency associated with the individual wind turbine generators. This paper considers the integration of a short-term energy storage device in a doubly fed induction generator design in order to smooth the fast wind-induced power variations. This storage device can also be used to reinforce the dc bus during transients, thereby enhancing its low-voltage ride through (LVRT) capability. The topology is evaluated in terms of its ability to improve the performance both during normal operation and during transients. Results show that when storage is sized based upon the LVRT requirement, it can effectively damp short-term power oscillations, and it provides superior transient performance when compared with conventional topologies
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Energy Storage and Its Use With Intermittent Renewable Energy
Barton, J. P., & Infield, D. G. (2004) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2003.822305 · Cited by 1,388
Modeling the dynamic behavior of supercapacitors using impedance spectroscopy
Buller, S., Karden, E., Kok, D., & De Doncker, R. W. (2002) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2002.804762 · Cited by 401
Integration of energy storage with a doubly-fed induction machine for wind power applications
Abbey, C., & Joós, G. (2005) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2004.1355418 · Cited by 41
Self-citation
Cited by
Luo, X., Wang, J., Dooner, M., & Clarke, J. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.09.081 · Cited by 3,869
A review of energy storage technologies for wind power applications
Díaz-González, F., Sumper, A., Gomis-Bellmunt, O., & Villafáfila-Robles, R. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.029 · Cited by 1,547
Lai, X., Halpert, J. E., & Wang, D. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02426d · Cited by 1,127
Energy storage for mitigating the variability of renewable electricity sources: An updated review
Beaudin, M., Zareipour, H., Schellenberglabe, A., & Rosehart, W. (2010) · Energy for Sustainable Development · doi:10.1016/j.esd.2010.09.007 · Cited by 1,042
Kanchev, H., Lu, D., Colas, F., Lazarov, V., & Francois, B. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2119451 · Cited by 985
Metadata
- Authors
- Abbey, C., & Joos, G.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 2007
- Volume
- 43
- Issue
- 3
- Pages
- 769-776
- ISSN
- 0093-9994 (ISSN-L)
- OpenAlex
- W2129398593
- Cited by
- 837
- References
- 3
- FWCI
- 26.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.