Diagnosis of Bearing Faults in Induction Machines by Vibration or Current Signals: A Critical Comparison
Open accessThe DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Abstract
Mechanical imbalances and bearing faults account for a large majority of the faults in a machine, particularly for small-medium size machines. Therefore, their diagnosis is an intensively investigated field of research. Recently, many research activities were focused on the diagnosis of bearing faults by current signals. This paper compares the bearing fault detection capability obtained with the vibration and current signals. The paper contribution is the use of a simple and effective signal processing technique for both current and vibration signals, and a theoretical analysis of the physical link between faults, modeled as a torque disturbance, and current components. The focus of the paper is on the theoretical development of the correlation between torque disturbances and the amplitude of the current components, together with a review of fault models used in the literature. Another contribution is the re-creation of realistic incipient faults and their experimental validation. Radial effects are visible only in case of large failures that result in air-gap variations. Experiments are reported that confirm the proposed approach.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review
Nandi, S., Toliyat, H. A., & Li, X. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.847955 · Cited by 2,382
A review of induction motors signature analysis as a medium for faults detection
El Hachemi Benbouzid, M. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873206 · Cited by 1,602
Advances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140
Self-citationMotor bearing damage detection using stator current monitoring
Schoen, R. R., Habetler, T. G., Kamran, F., & Bartfield, R. G. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.475697 · Cited by 761
Motor bearing damage detection using stator current monitoring
Schoen, R. R., Habetler, T. G., Kamran, F., & Bartheld, R. G. (2002) · Proceedings of 1994 IEEE Industry Applications Society Annual Meeting · doi:10.1109/ias.1994.345491 · Cited by 638
Report of Large Motor Reliability Survey of Industrial and Commercial Installations, Part I
(1985) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1985.349532 · Cited by 602
Models for Bearing Damage Detection in Induction Motors Using Stator Current Monitoring
Blodt, M., Granjon, P., Raison, B., & Rostaing, G. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.917108 · Cited by 568
Transient analysis of cage induction machines under stator, rotor bar and end ring faults
Toliyat, H. A., & Lipo, T. A. (1995) · IEEE Transactions on Energy Conversion · doi:10.1109/60.391888 · Cited by 489
Dorrell, D. G., Thomson, W. T., & Roach, S. (1997) · IEEE Transactions on Industry Applications · doi:10.1109/28.567073 · Cited by 450
Dorrell, D. G., Thomson, W. T., & Roach, S. (2002) · IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting · doi:10.1109/ias.1995.530349 · Cited by 367
Thorsen, O. V., & Dalva, M. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.464536 · Cited by 344
RUBINI, R., & MENEGHETTI, U. (2001) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2000.1330 · Cited by 323
Self-citationStack, J. R., Habetler, T. G., & Harley, R. G. (2004) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2004.827454 · Cited by 290
Thorsen, O. V., & Dalva, M. (2002) · Proceedings of IEEE Petroleum and Chemical Industry Technical Conference (PCIC '94) · doi:10.1109/pcicon.1994.347637 · Cited by 264
An Amplitude Modulation Detector for Fault Diagnosis in Rolling Element Bearings
Stack, J. R., Harley, R. G., & Habetler, T. G. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.834971 · Cited by 224
Blodt, M., Bonacci, D., Regnier, J., Chabert, M., & Faucher, J. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.911941 · Cited by 181
Bearing Fault Detection via Autoregressive Stator Current Modeling
Stack, J. R., Habetler, T. G., & Harley, R. G. (2004) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2004.827797 · Cited by 158
Finite-Element Transient Analysis of Induction Motors Under Mixed Eccentricity Fault
Faiz, J., Ebrahimi, B. M., Akin, B., et al. (2007) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2007.908479 · Cited by 153
Fault-signature modeling and detection of inner-race bearing faults
Stack, J. R., Habetler, T. G., & Harley, R. G. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.861365 · Cited by 133
Monitoring of induction motor load by neural network techniques
Salles, G., Filippetti, F., Tassoni, C., Crellet, G., & Franceschini, G. (2000) · IEEE Transactions on Power Electronics · doi:10.1109/63.849047 · Cited by 125
Self-citationRoot cause AC motor failure analysis with a focus on shaft failures
Bonnett, A. H. (2000) · IEEE Transactions on Industry Applications · doi:10.1109/28.871294 · Cited by 121
Models for bearing damage detection in induction motors using stator current monitoring
Blödt, M., Granjon, P., Raison, B., & Rostaing, G. (2004) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2004.1571838 · Cited by 110
Bearing failures diagnosis in three-phase induction motors by extended Park's vector approach
da Silva, J. P. L. R., & Cardoso, A. J. M. (2005) · doi:10.1109/iecon.2005.1569315 · Cited by 95
Watson, J. F., & Dorrell, D. G. (1999) · IEEE Transactions on Energy Conversion · doi:10.1109/60.790931 · Cited by 63
A comparison of cyclostationary and envelope analysis in the diagnostics of rolling element bearings
Randall, R. B., Antoni, J., & Chobsaard, S. (2002) · IEEE International Conference on Acoustics Speech and Signal Processing · doi:10.1109/icassp.2000.860251 · Cited by 50
Cited by
Deep Learning Algorithms for Bearing Fault Diagnostics—A Comprehensive Review
Zhang, S., Zhang, S., Wang, B., & Habetler, T. G. (2020) · IEEE Access · doi:10.1109/access.2020.2972859 · Cited by 913
Data-Driven Methods for Predictive Maintenance of Industrial Equipment: A Survey
Zhang, W., Yang, D., & Wang, H. (2019) · IEEE Systems Journal · doi:10.1109/jsyst.2019.2905565 · Cited by 732
A review on data-driven fault severity assessment in rolling bearings
Cerrada, M., Sánchez, R.-V., Li, C., Pacheco, F., Cabrera, D., Valente de Oliveira, J., & Vásquez, R. E. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.06.012 · Cited by 724
Gangsar, P., & Tiwari, R. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106908 · Cited by 605
Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2287651 · Cited by 602
Metadata
- Authors
- Immovilli, F., Bellini, A., Rubini, R., & Tassoni, C.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 2010-07
- Volume
- 46
- Issue
- 4
- Pages
- 1350-1359
- ISSN
- 0093-9994 (ISSN-L)
- 1939-9367
- OpenAlex
- W2153428002
- Cited by
- 382
- References
- 25
- FWCI
- 25.49
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.