The DOI matches its Crossref record.
Development and Validation of Model for 95%-Efficiency 220-W Wireless Power Transfer Over a 30-cm Air Gap
Abstract
Although 60-W wireless power transfer (WPT) was demonstrated in 2007, still there is no equivalent circuit model for a submeter air-gap, hundreds of watts, and high-efficiency wireless system. A design-oriented circuit model is needed for this technology to evolve. This paper proposes an equivalent circuit model for the wireless system and analyzes the system based on the proposed model. The proposed model and its analysis are validated by means of finite-element analysis (FEA) and experimental results. Furthermore, as a viable solution for high-power (multikilowatt) applications, losses in the WPT system are investigated in the following section. Because of the high operating frequency (in megahertz), skin and proximity effects were shown to be dominant. A new spatial layout of a coil is proposed that significantly reduces losses caused by skin and proximity effects. With the new spatial layout, i.e., the surface spiral layout, the efficiency and size of WPT system can be improved significantly in high-power applications. The proposed coil design is evaluated by means of FEA.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A Critical Review of Recent Progress in Mid-Range Wireless Power Transfer
Hui, S. Y. R., Zhong, W., & Lee, C. K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2249670 · Cited by 1,465
Modern Trends in Inductive Power Transfer for Transportation Applications
Covic, G. A., & Boys, J. T. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2264473 · Cited by 1,263
Dai, J., & Ludois, D. C. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2415253 · Cited by 638
Li, H., Li, J., Wang, K., Chen, W., & Yang, X. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2349534 · Cited by 592
Overview of wireless power transfer technologies for electric vehicle battery charging
Musavi, F., & Eberle, W. (2014) · IET Power Electronics · doi:10.1049/iet-pel.2013.0047 · Cited by 417
Maximizing DC-to-Load Efficiency for Inductive Power Transfer
Pinuela, M., Yates, D. C., Lucyszyn, S., & Mitcheson, P. D. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2215887 · Cited by 354
Modeling of Mutual Coupling Between Planar Inductors in Wireless Power Applications
Raju, S., Wu, R., Chan, M., & Yue, C. P. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2253334 · Cited by 343
Analysis and Tracking of Optimal Load in Wireless Power Transfer Systems
Fu, M., Yin, H., Zhu, X., & Ma, C. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2347071 · Cited by 330
Barman, S. D., Reza, A. W., Kumar, N., Karim, M. E., & Munir, A. B. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.07.031 · Cited by 303
Opportunities and Challenges for Near-Field Wireless Power Transfer: A Review
Jawad, A. M., Nordin, R., Gharghan, S. K., Jawad, H. M., & Ismail, M. (2017) · Energies · doi:10.3390/en10071022 · Cited by 268
Near-field wireless power transfer used in biomedical implants: a comprehensive review
Mahmood, A. I., Gharghan, S. K., Eldosoky, M. A., & Soliman, A. M. (2022) · IET Power Electronics · doi:10.1049/pel2.12351 · Cited by 59
A review on unidirectional converters for on-board chargers in electric vehicle
Vijayakumar, S., & Sudhakar, N. (2022) · Frontiers in Energy Research · doi:10.3389/fenrg.2022.1011681 · Cited by 26
“Since charging a battery in a sinusoidal-like direct current (Youn and Lee, 2011; Yoo et al., 2013), input AC power goes to the battery side directly, without an energy buffer such as a DC-link capacitor.”
Background
Metadata
- Authors
- Lee, S.-H., & Lorenz, R. D.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 2011-11
- Volume
- 47
- Issue
- 6
- Pages
- 2495-2504
- ISSN
- 0093-9994 (ISSN-L)
- OpenAlex
- W1986137912
- Cited by
- 247
- References
- 0
- FWCI
- 15.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.