The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Fault-Tolerant In-Wheel Motor Topologies for High-Performance Electric Vehicles
Open accessAbstract
The use of in-wheel motors, often referred to as hub motors, as a source of propulsion for pure electric or hybrid electric vehicles has recently received a lot of attention. Since the motor is housed in the limited space within the wheel rim, it must have high torque density and efficiency and survive the rigors of being in-wheel in terms of environmental cycling, ingress, shock and vibration, and driver abuse. Finally, to ensure that adequate levels of functional safety are met, it is essential that failures do not lead to the loss of control of the vehicle. This paper presents studies of a fault-tolerant concept for the design of in-wheel motors. The study focused on achieving a high torque density and the ability to sustain an adequate level of performance following a failure. A series of failures is simulated and then compared with experimental tests on a demonstrator motor.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fault-tolerant permanent magnet machinedrives
Mecrow, B. C., Jack, A. G., Haylock, J. A., & Coles, J. (1996) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:19960796 · Cited by 376 · cited 1×
“Mounting the EV drive train in the wheel of the vehicle has received significant interest due to the following advantages: • It releases vehicle space for passengers cabin, traction batteries etc. • The torque at each wheel can be independently controlled, giving true 4 wheel drive.”
BackgroundSelf-citation
Cited by
Automotive Electric Propulsion Systems With Reduced or No Permanent Magnets: An Overview
Boldea, I., Tutelea, L. N., Parsa, L., & Dorrell, D. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2301754 · Cited by 813
Metadata
- Authors
- Ifedi, C. J., Mecrow, B. C., Brockway, S. T. M., Boast, G. S., Atkinson, G. J., & Kostic-Perovic, D.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 2013-05
- Volume
- 49
- Issue
- 3
- Pages
- 1249-1257
- ISSN
- 0093-9994 (ISSN-L)
- 1939-9367
- OpenAlex
- W2081482526
- Cited by
- 158
- References
- 1
- FWCI
- 6.79
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fault-Tolerant In-Wheel Motor Topologies for High-Performance Electric Vehicles. https://app.cochat.ai/papers/10.1109/tia.2013.2252131
- The paper
- Ifedi, C. J., Mecrow, B. C., Brockway, S. T. M., Boast, G. S., Atkinson, G. J., & Kostic-Perovic, D. (2013). Fault-Tolerant In-Wheel Motor Topologies for High-Performance Electric Vehicles. IEEE Transactions on Industry Applications. https://doi.org/10.1109/tia.2013.2252131
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.