The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Advanced High-Power-Density Interior Permanent Magnet Motor for Traction Applications
Abstract
Electric drive systems, which include electric machines and power electronics, are a key enabling technology for advanced vehicle propulsion systems that reduce the petroleum dependence of the ground transportation sector. To have significant effect, electric drive technologies must be economical in terms of cost, weight, and size while meeting performance and reliability expectations. This paper will provide details of the design, analysis, and testing of an advanced interior permanent magnet (PM) machine that was developed to meet the FreedomCAR 2020 specifications. The 12-slot/10-pole machine has segmented stator structure equipped with fractional-slot nonoverlapping concentrated windings. The rotor has a novel spoke structure/assembly. Several prototypes with different thermal management schemes have been built and tested. This paper will cover the test results for all these prototypes and highlight the tradeoffs between the various schemes. Due to the high machine frequency (~1.2 kHz at the top speed), detailed analysis of various loss components and ways to reduce them will be presented. In addition, due to the high coolant inlet temperature and the fact that the machine is designed to continuously operate at 180 °C, detailed PM demagnetization analysis will be presented. The key novelty in this paper is the advanced rotor structure and the thermal management schemes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
EL-Refaie, A. M. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2030211 · Cited by 1,373
Self-citationSynthesis of high performance PM motors with concentrated windings
Cros, J., & Viarouge, P. (2002) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2002.1009476 · Cited by 667
Optimal Flux Weakening in Surface PM Machines Using Fractional-Slot Concentrated Windings
EL-Refaie, A. M., & Jahns, T. M. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.847312 · Cited by 400
Self-citationFault-tolerant permanent magnet machinedrives
Mecrow, B. C., Jack, A. G., Haylock, J. A., & Coles, J. (1996) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:19960796 · Cited by 376
Rotor loss in permanent-magnet brushless AC machines
Stone, D. A., Mellor, P. H., Howe, D., & Atallah, K. (2000) · IEEE Transactions on Industry Applications · doi:10.1109/28.887213 · Cited by 326
Rotor loss in permanent magnet brushless AC machines
Atallah, K., Howe, D., Mellor, P. H., & Stone, D. A. (2003) · IEEE International Electric Machines and Drives Conference. IEMDC'99. Proceedings (Cat. No.99EX272) · doi:10.1109/iemdc.1999.769027 · Cited by 308
Reddy, P. B., El-Refaie, A. M., Huh, K.-K., Tangudu, J. K., & Jahns, T. M. (2012) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2012.2195316 · Cited by 253
Self-citationShah, M. R., & EL-Refaie, A. M. (2009) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2009.2013599 · Cited by 70
Self-citationEL-Refaie, A. M., Shah, M. R., Qu, R., & Kern, J. M. (2008) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2008.2002207 · Cited by 68
Self-citationEL-Refaie, A. M., Shah, M. R., Alexander, J. P., Galioto, S. J., Huh, K., & Gerstler, W. D. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2011.2162049 · Cited by 28
Self-citation
Metadata
- Authors
- EL-Refaie, A. M., Alexander, J. P., Galioto, S., Reddy, P. B., Huh, K.-K., de Bock, P., & Shen, X.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 2014-09
- Volume
- 50
- Issue
- 5
- Pages
- 3235-3248
- ISSN
- 0093-9994 (ISSN-L)
- 1939-9367
- OpenAlex
- W2320377497
- Cited by
- 285
- References
- 12
- FWCI
- 13.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Advanced High-Power-Density Interior Permanent Magnet Motor for Traction Applications. https://app.cochat.ai/papers/10.1109/tia.2014.2305804
- The paper
- EL-Refaie, A. M., Alexander, J. P., Galioto, S., Reddy, P. B., Huh, K.-K., de Bock, P., & Shen, X. (2014). Advanced High-Power-Density Interior Permanent Magnet Motor for Traction Applications. IEEE Transactions on Industry Applications. https://doi.org/10.1109/tia.2014.2305804
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.