Vibrations in Steel Strips: Effects on Flatness Measurement and Filtering
The DOI matches its Crossref record; 8 of the 9 references it cites were found in a registry or an index.
Abstract
Vibrations are periodic or random motion from an equilibrium position. In the steel industry, vibrations are an undesirable phenomenon, as they waste energy and create unwanted noise. For example, vibrations affect steel strips during rolling and transportation, producing random or periodic vertical movements of the strips as they move forward along a roll path. The consequences of these vibrations are particularly harmful for 3-D reconstruction and flatness measurement based on non-contact techniques. Vibrations corrupt the height profiles, causing an erroneous reconstruction of the 3-D surface. The flatness measurement is also distorted because the estimated lengths of the strip fibers with vibrations are different. This paper analyzes how vibrations in steel strips affect flatness measurement, and proposes methods to remove or reduce these effects. The shape of steel strips is firstly modeled including the two most common flatness defects: wavy edges and center buckle. Then, different types of vibrations are added to the strip models, and their effects on the resulting flatness measurement are analyzed. The method proposed to reduce the effects of vibrations is a combination of a low-pass filter and geometric transformations. Finally, these methods are applied to data from real strips.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“on-site surface defect detection in real-world steel mills is seriously challenging: 1) Unsatisfactory imaging environments.Continuous casting and rolling production lines involve multiple sufferings of high temperature, dense mist, heavy cooling water drops [5], uneven illumination, stochastic noises [1,2], and aperiodic vibration [6].”
From Automated Visual Defect Detection for Flat Steel Surface: A Survey (2020) · cites this paper as [6]
Citations
Cites
Fischler, M. A., & Bolles, R. C. (1981) · Communications of the ACM · doi:10.1145/358669.358692 · Cited by 25,893
Ginzburg, V. B. (1993) · CRC Press eBooks · doi:10.1201/9781466564640 · Cited by 163
Molleda, J., Usamentiaga, R., García, D. F., & Bulnes, F. G. (2010) · Journal of Electronic Imaging · doi:10.1117/1.3455987 · Cited by 49
Self-citation3D surface acquisition and reconstruction for inspection of raw steel products
Pernkopf, F. (2005) · Computers in Industry · doi:10.1016/j.compind.2005.05.025 · Cited by 36
Machine Vision System for Flatness Control Feedback
Usamentiaga, R., Molleda, J., Garcia, D. F., & Bulnes, F. G. (2009) · International Conference on Machine Vision · doi:10.1109/icmv.2009.14 · Cited by 18
Self-citationLopera, J. M., Villegas, P., Linera, F. F., Hernandez-Magadan, F., Martín‐Ramos, J. A., Diaz, J., Vecino, G., & Rendueles, J. L. (2008) · IEEE Industry Applications Magazine · doi:10.1109/mia.2007.914279 · Cited by 12
Compensation for Uneven Temperature in Flatness Control Systems for Steel Strips
Usamentiaga, R., Garcia, D. F., González, D., & Molleda, J. (2006) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2006.256569 · Cited by 11
Self-citationA study on vibration control of steel strips by using only current sensors
Imai, H., Tanaka, T., & Nakagawa, T. (2001) · International Journal of Applied Electromagnetics and Mechanics · doi:10.3233/jae-2002-308 · Cited by 5
Research works printed but not linked: 2
- carlstedt, 1991, Modern approach to flatness measurement and control in cold rolling, Iron Steel Eng, 68, 34
- ginzburg, 1990, Geometry of Flat Rolled Products
Cited by
Automated Visual Defect Detection for Flat Steel Surface: A Survey
Luo, Q., Fang, X., Liu, L., Yang, C., & Sun, Y. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2963555 · Cited by 559
Generalized Completed Local Binary Patterns for Time-Efficient Steel Surface Defect Classification
Luo, Q., Sun, Y., Li, P., Simpson, O., Tian, L., & He, Y. (2019) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2852918 · Cited by 178
Research Progress of Automated Visual Surface Defect Detection for Industrial Metal Planar Materials
Fang, X., Luo, Q., Zhou, B., Li, C., & Tian, L. (2020) · Sensors · doi:10.3390/s20185136 · Cited by 160
A critical review on applications of artificial intelligence in manufacturing
Mypati, O., Mukherjee, A., Mishra, D., Pal, S. K., Chakrabarti, P. P., & Pal, A. (2023) · Artificial Intelligence Review · doi:10.1007/s10462-023-10535-y · Cited by 88
Luo, Q., Fang, X., Sun, Y., Liu, L., Ai, J., Yang, C., & Simpson, O. (2019) · IEEE Access · doi:10.1109/access.2019.2898215 · Cited by 75
Metadata
- Authors
- Usamentiaga, R., Garcia, D. F., Molleda, J., Bulnes, F. G., & Bonet Brana, G.
- Affiliations
- Universidad de Oviedo (ES)
- Venue
- IEEE Transactions on Industry Applications
- Published
- 2014-09
- Volume
- 50
- Issue
- 5
- Pages
- 3103-3112
- ISSN
- 0093-9994 (ISSN-L)
- 1939-9367
- OpenAlex
- W2172335211
- Cited by
- 21
- References
- 9
- Citations by year
- 2025: 1 · 2024: 1 · 2023: 1 · 2022: 2 · 2021: 1 · 2020: 3 · 2019: 3 · 2018: 1 · 2017: 2 · 2015: 2 · 2014: 2
- FWCI
- 1.79
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Industry Applications (publishedVersion)
- Funders
- Spanish National Plan for Research, Development and Innovation (TIN2001-24903)
- Topics
- Physical Sciences › Computer Science › Computer Vision and Pattern Recognition › Optical measurement and interference techniques
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Industrial Vision Systems and Defect Detection
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Measurement and Metrology Techniques
- Keywords
- flatness measurement, 3D reconstruction, non-contact measurement, low-pass filtering, geometric transformations, vibration filtering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Vibrations in Steel Strips: Effects on Flatness Measurement and Filtering. https://app.cochat.ai/papers/10.1109/tia.2014.2308359
- The paper
- Usamentiaga, R., Garcia, D. F., Molleda, J., Bulnes, F. G., & Bonet Brana, G. (2014). Vibrations in Steel Strips: Effects on Flatness Measurement and Filtering. IEEE Transactions on Industry Applications. https://doi.org/10.1109/tia.2014.2308359
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.