Steady-State Loss Model of Half-Bridge Modular Multilevel Converters
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Lesnicar and Marquardt introduced a modular multilevel converter (MMC) topology back in 2003. Although this topology has received a great deal of attention in recent years by both the research community and industry, hitherto no steady-state model has been developed which accurately captured all the relevant power losses while being computationally light. Hence, the aim of this paper is to introduce a fast MMC loss model which captures the key sources of power losses in steady-state operation. The proposed model was compared to a loss model developed by Marquardt. Both models presented similar results under the same assumptions. However, the proposed model captures the switching losses more realistically and considers the temperature of operation of the electronics, as well as the losses of the inductors and cooling system, in the overall efficiency of the MMC. To validate these new additions, the proposed steady-state model was compared to a dynamic model. Once again, the proposed model was able to capture the different sources of power losses. Nonetheless, results demonstrated that the balancing strategy greatly influences the efficiency of the MMC. Therefore, information regarding the envisioned control strategy is necessary to accurately calculate the efficiency curve of the MMC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tu, Q., Xu, Z., & Xu, L. (2011) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2011.2115258 · Cited by 1,387
Pou, J., Ceballos, S., Konstantinou, G., Agelidis, V. G., Picas, R., & Zaragoza, J. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2336608 · Cited by 406
Cited by
Reliability and Cost based Redundancy Design for Modular Multilevel Converter
Tu, P., Yang, S., & Wang, P. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2793263 · Cited by 199
“For the power loss cost calculation, the MMC steady-state loss model is presented in [39] and [40].”
MethodRabiul Islam, M., Mahfuz-Ur-Rahman, A. M., Muttaqi, K. M., & Sutanto, D. (2019) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2018.2878885 · Cited by 178
“posed method the average IGBT and the diode conduction losses can be computed as [70]”
MethodLoss Optimization of MMC by Second-Order Harmonic Circulating Current Injection
Yang, L., Li, Y., Li, Z., Wang, P., Xu, S., & Gou, R. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2751068 · Cited by 97
“The accuracy of the simulation look-up table method [9]–[11] is tested by the experimental results of the MMC at the project”
MethodIslam, M. M., Rahman, M. A., & Islam, M. R. (2021) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2020.3000596 · Cited by 16
“Although, the coupling effect for each layer of IGBT modules with heat-sink has not been considered in [16]–[19].”
Background
Metadata
- Authors
- Rodrigues, S., Papadopoulos, A., Kontos, E., Todorcevic, T., & Bauer, P.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 2016-05
- Volume
- 52
- Issue
- 3
- Pages
- 2415-2425
- ISSN
- 0093-9994 (ISSN-L)
- 1939-9367
- OpenAlex
- W2345063168
- Cited by
- 61
- References
- 2
- FWCI
- 6.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.