The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Machine Learning-Based Fault Diagnosis for Single- and Multi-Faults in Induction Motors Using Measured Stator Currents and Vibration Signals
Abstract
In this paper, a practical machine learning-based fault diagnosis method is proposed for induction motors using experimental data. Various single- and multi-electrical and/or mechanical faults are applied to two identical induction motors in lab experiments. Stator currents and vibration signals of the motors are measured simultaneously during experiments and are used in developing the fault diagnosis method. Two signal processing techniques, matching pursuit, and discrete wavelet transform, are chosen for feature extraction. Three classification algorithms, support vector machine (SVM), K-nearest neighbors (KNN), and ensemble, with 17 different classifiers offered in MATLAB Classification Learner toolbox are used in the study to evaluate the performance and suitability of different classifiers for induction motor fault diagnosis. It is found that five classifiers (fine Gaussian SVM, fine KNN, weighted KNN, bagged trees, and subspace KNN) can provide near 100% classification accuracy for all faults applied to each motor, but the remaining 12 classifiers do not perform well. A novel curve fitting technique is developed to calculate features for the motors that stator currents or vibration signals under certain loadings are not tested for a particular fault. The proposed fault diagnosis method can accurately detect single- or multi-electrical and mechanical faults in induction motors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Breiman, L. (1996) · Machine Learning · doi:10.1007/bf00058655 · Cited by 16,325
Matching pursuits with time-frequency dictionaries
Mallat, S. G., & Zhang, Z. (1993) · IEEE Transactions on Signal Processing · doi:10.1109/78.258082 · Cited by 9,112
An introduction to kernel-based learning algorithms
Muller, K.-R., Mika, S., Ratsch, G., Tsuda, K., & Scholkopf, B. (2001) · IEEE Transactions on Neural Networks · doi:10.1109/72.914517 · Cited by 3,473
Prieto, M. D., Cirrincione, G., Espinosa, A. G., Ortega, J. A., & Henao, H. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2219838 · Cited by 461
Fault Diagnosis in Industrial Induction Machines Through Discrete Wavelet Transform
Bouzida, A., Touhami, O., Ibtiouen, R., Belouchrani, A., Fadel, M., & Rezzoug, A. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2095391 · Cited by 325
Daviu, J. A. A., Riera‐Guasp, M., Folch, J. R., & Palomares, M. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.876082 · Cited by 317
Convolutional Discriminative Feature Learning for Induction Motor Fault Diagnosis
Sun, W., Zhao, R., Yan, R., Shao, S., & Chen, X. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2672988 · Cited by 295
Induction Machine Condition Monitoring Using Neural Network Modeling
Su, H., & Chong, K. T. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.888786 · Cited by 271
Riera-Guasp, M., Antonino-Daviu, J. A., Pineda-Sanchez, M., Puche-Panadero, R., & Perez-Cruz, J. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2004378 · Cited by 267
An unsupervised, on-line system for induction motor fault detection using stator current monitoring
Schoen, R. R., Lin, B. K., Habetler, T. G., Schlag, J. H., & Farag, S. (2002) · Proceedings of 1994 IEEE Industry Applications Society Annual Meeting · doi:10.1109/ias.1994.345492 · Cited by 264
Cited by
Motor Fault Diagnostics Based on Current Signatures: A Review
Niu, G., Dong, X., & Chen, Y. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3285999 · Cited by 269
Pietrzak, P., & Wolkiewicz, M. (2021) · Electronics · doi:10.3390/electronics10151786 · Cited by 54
Metadata
- Authors
- Ali, M. Z., Shabbir, M. N. S. K., Liang, X., Zhang, Y., & Hu, T.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 2019-05
- Volume
- 55
- Issue
- 3
- Pages
- 2378-2391
- ISSN
- 0093-9994 (ISSN-L)
- 1939-9367
- OpenAlex
- W2913289332
- Cited by
- 349
- References
- 39
- FWCI
- 19.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Machine Learning-Based Fault Diagnosis for Single- and Multi-Faults in Induction Motors Using Measured Stator Currents and Vibration Signals. https://app.cochat.ai/papers/10.1109/tia.2019.2895797
- The paper
- Ali, M. Z., Shabbir, M. N. S. K., Liang, X., Zhang, Y., & Hu, T. (2019). Machine Learning-Based Fault Diagnosis for Single- and Multi-Faults in Induction Motors Using Measured Stator Currents and Vibration Signals. IEEE Transactions on Industry Applications. https://doi.org/10.1109/tia.2019.2895797
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.