The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Induction Machine Condition Monitoring Using Neural Network Modeling
Abstract
Condition monitoring is desirable for increasing machinery availability, reducing consequential damage, and improving operational efficiency. Model-based methods are efficient monitoring systems for providing warning and predicting certain faults at early stages. However, the conventional methods must work with explicit motor models, and cannot be applied effectively for vibration signal diagnosis due to their nonadaptation and the random nature of vibration signal. In this paper, an analytical redundancy method using neural network modeling of the induction motor in vibration spectra is proposed for machine fault detection and diagnosis. The short-time Fourier transform is used to process the quasi-steady vibration signals to continuous spectra for the neural network model training. The faults are detected from changes in the expectation of vibration spectra modeling error. The effectiveness of the proposed method is demonstrated through experimental results, and it is shown that a robust and automatic induction machine condition monitoring system has been produced
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Neural Networks for Modelling and Control of Dynamic Systems
Nørgaard, M., Ravn, O., Poulsen, N. K., & Hansen, L. K. (2000) · Advanced Textbooks in Control and Signal Processing · doi:10.1007/978-1-4471-0453-7 · Cited by 1,006
New results on recurrent network training: unifying the algorithms and accelerating convergence
Atiya, A. F., & Parlos, A. G. (2000) · IEEE Transactions on Neural Networks · doi:10.1109/72.846741 · Cited by 521
Condition monitoring of electrical machines
Tavner, P., & Penman, J. (1987) · Durham Research Online (Durham University) · Cited by 353
A DSP-based FFT-analyzer for the fault diagnosis of rotating machine based on vibration analysis
Betta, G., Liguori, C., Paolillo, A., & Pietrosanto, A. (2002) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2002.807987 · Cited by 211
Singh, G. K., & Ahmed, S. (2003) · Electric Power Systems Research · doi:10.1016/s0378-7796(03)00154-8 · Cited by 75
Cited by
Deep learning and its applications to machine health monitoring
Zhao, R., Yan, R., Chen, Z., Mao, K., Wang, P., & Gao, R. X. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.05.050 · Cited by 2,894
Advances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140
Learning to Monitor Machine Health with Convolutional Bi-Directional LSTM Networks
Zhao, R., Yan, R., Wang, J., & Mao, K. (2017) · Sensors · doi:10.3390/s17020273 · Cited by 741
Gangsar, P., & Tiwari, R. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106908 · Cited by 605
Fault Detection in Induction Machines Using Power Spectral Density in Wavelet Decomposition
Cusid�Cusido, J., Romeral, L., Ortega, J. A., Rosero, J. A., & Garc�aGarcia Espinosa, A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.911960 · Cited by 512
Metadata
- Authors
- Su, H., & Chong, K. T.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2007-02
- Volume
- 54
- Issue
- 1
- Pages
- 241-249
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2139575464
- Cited by
- 271
- References
- 5
- FWCI
- 43.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Induction Machine Condition Monitoring Using Neural Network Modeling. https://app.cochat.ai/papers/10.1109/tie.2006.888786
- The paper
- Su, H., & Chong, K. T. (2007). Induction Machine Condition Monitoring Using Neural Network Modeling. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2006.888786
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.