The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
A contactless electrical energy transmission system for portable-telephone battery chargers
Abstract
A high-performance contactless electrical energy transmission (CEET) technique which employs the inductive energy transmission principle is described. The proposed technique enables the implementation of high-efficiency high-power-density fully regulated CEET systems suitable for applications with a wide input and load range. A high efficiency of the system is achieved by recovering the energy stored in the leakage inductances of the transformer by incorporating them in the operation of the circuit, and by employing high-frequency-inverter and controlled-rectifier topologies that allow a controlled bidirectional power flow through the transformer. In addition, a feedforward variable-switching-frequency control of the inverter is used to maintain approximately constant power transfer through the transformer with the input voltage changes, whereas the output-side rectifier employs a local pulsewidth-modulation control to achieve a tight regulation of the output in the presence of load variations. Specifically, the described CEET system is suitable for use in universal-input battery chargers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design of a contactless battery charger for cellular phone
Kim, C.-G., Seo, D.-H., You, J.-S., Park, J.-H., & Cho, B. H. (2001) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.969404 · Cited by 345
A contactless electrical energy transmission system
Pedder, D. A. G., Brown, A. D., & Skinner, J. A. (1999) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.744372 · Cited by 242
Cited by
Compensation Topologies of High-Power Wireless Power Transfer Systems
Zhang, W., & Mi, C. C. (2016) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2015.2454292 · Cited by 992
Planar Wireless Charging Technology for Portable Electronic Products and Qi
Hui, S. Y. (2013) · Proceedings of the IEEE · doi:10.1109/jproc.2013.2246531 · Cited by 648
Dai, J., & Ludois, D. C. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2415253 · Cited by 638
Maximum Energy Efficiency Tracking for Wireless Power Transfer Systems
Zhong, W. X., & Hui, S. Y. R. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2351496 · Cited by 476
General Analysis on the Use of Tesla's Resonators in Domino Forms for Wireless Power Transfer
Zhong, W., Lee, C. K., & Hui, S. Y. R. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2171176 · Cited by 362
Metadata
- Authors
- Jang, Y., & Jovanovic, M. M.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2003-06
- Volume
- 50
- Issue
- 3
- Pages
- 520-527
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2037726546
- Cited by
- 484
- References
- 2
- FWCI
- 3.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A contactless electrical energy transmission system for portable-telephone battery chargers. https://app.cochat.ai/papers/10.1109/tie.2003.812472
- The paper
- Jang, Y., & Jovanovic, M. M. (2003). A contactless electrical energy transmission system for portable-telephone battery chargers. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2003.812472
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
