The DOI matches its Crossref record.
Active Voltage Clamp in Flyback Converters Operating in CCM Mode Under Wide Load Variation
Abstract
Active clamp topologies of low power dissipation have become a very attractive solution in order to limit overvoltages in flyback converters. Although many suitable topologies have been introduced for the case of discontinuous conduction mode (DCM), where the duty cycle value depends on the load level, in continuous conduction mode (CCM) it is more difficult to appropriately design such topologies so as to "sense" load changes-due to the small duty cycle divergence under wide load variation. Taking for granted that in order to achieve high power-factor correction in these converters, CCM is a more attractive mode of operation, a drastic solution for this case that will manage to eliminate voltage stresses under wide load changes has become very essential. For this purpose, this paper presents an active clamp topology with small power dissipation, suitable for flyback converters operating in CCM mode. Its main idea is the use of a load-dependent current source, consisting of an auxiliary converter operating in DCM mode. Experimental results highlight the effectiveness of the proposed topology under wide load changes, establishing it as an appropriate solution in order to develop flyback converters, even at the power range of 500 W.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Transformerless DC–DC Converters With High Step-Up Voltage Gain
Yang, L.-S., Liang, T.-J., & Chen, J.-F. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2022512 · Cited by 808
High Step-Up DC–DC Converter With Active Switched-Inductor and Passive Switched-Capacitor Networks
Salvador, M. A., Lazzarin, T. B., & Coelho, R. F. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2782239 · Cited by 438
A Cascaded High Step-Up DC–DC Converter With Single Switch for Microsource Applications
Chen, S.-M., Liang, T.-J., Yang, L.-S., & Chen, J.-F. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2090362 · Cited by 412
Novel High Step-Up DC–DC Converter for Distributed Generation System
Hsieh, Y.-P., Chen, J.-F., Liang, T.-J., & Yang, L.-S. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2107721 · Cited by 295
An interleaved AC-DC converter based on current tracking
Hwu, K. I., & Yau, Y. T. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2010174 · Cited by 58
Metadata
- Authors
- Papanikolaou, N. P., & Tatakis, E. C.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2004-06
- Volume
- 51
- Issue
- 3
- Pages
- 632-640
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2112594534
- Cited by
- 199
- References
- 0
- FWCI
- 2.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Active Voltage Clamp in Flyback Converters Operating in CCM Mode Under Wide Load Variation. https://app.cochat.ai/papers/10.1109/tie.2004.825342
- The paper
- Papanikolaou, N. P., & Tatakis, E. C. (2004). Active Voltage Clamp in Flyback Converters Operating in CCM Mode Under Wide Load Variation. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2004.825342
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.