The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Sensorless Control of Induction Machines—With or Without Signal Injection?
Abstract
Controlled induction motor drives without mechanical speed sensors at the motor shaft have the attractions of low cost and high reliability. To replace the sensor, information on the rotor speed is extracted from measured stator currents and from voltages at motor terminals. Vector-controlled drives require estimating the magnitude and spatial orientation of the fundamental magnetic flux waves in the stator or in the rotor. Open-loop estimators or closed-loop observers are used for this purpose. They differ with respect to accuracy, robustness, and sensitivity against model parameter variations. Dynamic performance and steady-state speed accuracy around zero speed range are achieved by signal injection, exploiting the anisotropic properties of the machine. The overview in this paper uses signal flow graphs of complex space vector quantities to provide an insightful description of the systems used in sensorless control of induction motors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adaptive speed identification for vector control of induction motors without rotational transducers
Schauder, C. (1992) · IEEE Transactions on Industry Applications · doi:10.1109/28.158829 · Cited by 1,125
DSP-based speed adaptive flux observer of induction motor
Kubota, H., Matsuse, K., & Nakano, T. (1993) · IEEE Transactions on Industry Applications · doi:10.1109/28.216542 · Cited by 908
Sensorless control of AC machines at low speed and standstill based on the "INFORM" method
Schroedl, M. (2002) · IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting · doi:10.1109/ias.1996.557028 · Cited by 618
Holtz, J., & Quan, J. (2002) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2002.800779 · Cited by 376
Self-citationHoltz, J., & Quan, J. (2002) · Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248) · doi:10.1109/ias.2001.955988 · Cited by 354
Self-citationHoltz, J., & Quan, J. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.813726 · Cited by 313
Self-citationSpeed-sensorless direct torque control of induction motors using an adaptive flux observer
Maes, J., & Melkebeek, J. A. (2000) · IEEE Transactions on Industry Applications · doi:10.1109/28.845053 · Cited by 305
Kim, H., Harke, M. C., & Lorenz, R. D. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.818966 · Cited by 301
Speed sensorless direct torque control of induction motors using an adaptive flux observer
Maes, J., & Melkebeek, J. (2003) · Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370) · doi:10.1109/ias.1999.799165 · Cited by 267
Holtz, J., & Quan, J. (2003) · Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344) · doi:10.1109/ias.2002.1043761 · Cited by 243
Self-citation
Cited by
Overview of Control Systems for the Operation of DFIGs in Wind Energy Applications
Cardenas, R., Pena, R., Alepuz, S., & Asher, G. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2243372 · Cited by 670
Industrial Applications of the Kalman Filter: A Review
Auger, F., Hilairet, M., Guerrero, J. M., Monmasson, E., Orlowska-Kowalska, T., & Katsura, S. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2236994 · Cited by 590
Overview of control systems for the operation of DFIGs in wind energy applications
Pena, R., Cardenas, R., & Asher, G. (2013) · IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.2013.6699116 · Cited by 529
Global Energy Scenario and Impact of Power Electronics in 21st Century
Bose, B. K. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2203771 · Cited by 476
Power Electronics and Motor Drives Recent Progress and Perspective
Bose, B. K. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2002726 · Cited by 431
Metadata
- Authors
- Holtz, J.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2006-02
- Volume
- 53
- Issue
- 1
- Pages
- 7-30
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2167458219
- Cited by
- 712
- References
- 10
- FWCI
- 36.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Sensorless Control of Induction Machines—With or Without Signal Injection? https://app.cochat.ai/papers/10.1109/tie.2005.862324
- The paper
- Holtz, J. (2006). Sensorless Control of Induction Machines—With or Without Signal Injection? IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2005.862324
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.