The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Design of a maximum power tracking system for wind-energy-conversion applications
Abstract
A wind-generator (WG) maximum-power-point-tracking (MPPT) system is presented, consisting of a high-efficiency buck-type dc/dc converter and a microcontroller-based control unit running the MPPT function. The advantages of the proposed MPPT method are that no knowledge of the WG optimal power characteristic or measurement of the wind speed is required and the WG operates at a variable speed. Thus, the system features higher reliability, lower complexity and cost, and less mechanical stress of the WG. Experimental results of the proposed system indicate near-optimal WG output power, increased by 11%-50% compared to a WG directly connected via a rectifier to the battery bank. Thus, better exploitation of the available wind energy is achieved, especially under low wind speeds.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Power electronics converters, applications and design
Robinson, F. V. P. (1997) · Microelectronics Journal · doi:10.1016/s0026-2692(97)87859-7 · Cited by 5,075
Power Electronics: Converters, Applications and Design
Mohan, N., Undeland, T. M., & Robbins, W. P. (1989) · Cited by 4,771
Rashid, R. (1988) · Cited by 2,662
Hilloowala, R. M., & Sharaf, A. M. (1996) · IEEE Transactions on Industry Applications · doi:10.1109/28.485813 · Cited by 247
A peak power tracker for small wind turbines in battery charging applications
Broe, A. M. D., Drouilhet, S., & Gevorgian, V. (1999) · IEEE Transactions on Energy Conversion · doi:10.1109/60.815116 · Cited by 219
Performance of a 10 kW power electronic interface for combined wind/PV isolated generating systems
Solero, L., Caricchi, F., Crescimbini, F., Honorati, O., & Mezzetti, F. (2002) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.1996.548708 · Cited by 107
Cited by
DC Microgrids–Part I: A Review of Control Strategies and Stabilization Techniques
Dragicevic, T., Lu, X., Vasquez, J., & Guerrero, J. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2478859 · Cited by 1,564
A Hybrid AC/DC Microgrid and Its Coordination Control
Liu, X., Wang, P., & Loh, P. C. (2011) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2011.2116162 · Cited by 1,192
High-power wind energy conversion systems: State-of-the-art and emerging technologies
Yaramasu, V., Wu, B., Sen, P. C., Kouro, S., & Narimani, M. (2015) · Proceedings of the IEEE · doi:10.1109/jproc.2014.2378692 · Cited by 991
A review of maximum power point tracking algorithms for wind energy systems
Abdullah, M. A., Yatim, A. H. M., Tan, C. W., & Saidur, R. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.02.016 · Cited by 770
“Some studies [25,48,49,56,58,59] used the duty cycle of the converter as an input control to the system.”
BackgroundMethodReliability Issues in Photovoltaic Power Processing Systems
Petrone, G., Spagnuolo, G., Teodorescu, R., Veerachary, M., & Vitelli, M. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.924016 · Cited by 579
Metadata
- Authors
- Koutroulis, E., & Kalaitzakis, K.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2006-04
- Volume
- 53
- Issue
- 2
- Pages
- 486-494
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2100248299
- Cited by
- 921
- References
- 6
- FWCI
- 28.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.