The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
A High-Resolution Frequency Estimation Method for Three-Phase Induction Machine Fault Detection
Abstract
Fault detection in alternating-current electrical machines that is based on frequency analysis of stator current has been the interest of many researchers. Several frequency estimation techniques have been developed and are used to help the induction machine fault detection and diagnosis. This paper presents a technique to improve the fault detection technique by using the classical multiple signal classification (MUSIC) method. This method is a powerful tool that extracts meaningful frequencies from the signal, and it has been widely used in different areas, which include electrical machines. In the proposed application, the fault sensitive frequencies have to be found in the stator current signature. They are numerous in a given frequency range, and they are affected by the signal-to-noise ratio. Then, the MUSIC method takes a long computation time to find many frequencies by increasing the dimension of the autocorrelation matrix. To solve this problem, an algorithm that is based on zooming in a specific frequency range is proposed with MUSIC in order to improve the performances of frequency extraction. Moreover, the method is integrated as a part of MUSIC to estimate the frequency signal dimension order based on classification of autocorrelation matrix eigenvalues. The proposed algorithm has been applied to detect a rotor broken bar fault in a three-phase squirrel-cage induction machine under different loads and in steady-state condition.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Discrete-Time Signal Processing
Oppenheim, A. V., & Schafer, R. W. (1989) · Cited by 12,572
Discrete-time Signal Processing
Williamson, D. (1999) · Advanced Textbooks in Control and Signal Processing · doi:10.1007/978-1-4471-0541-1 · Cited by 4,858
Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review
Nandi, S., Toliyat, H. A., & Li, X. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.847955 · Cited by 2,382
(2022) · Modern Signal Processing · doi:10.1515/9783110475562-004 · Cited by 996
Kaveh, M., & Barabell, A. (1986) · IEEE Transactions on Acoustics, Speech, and Signal Processing · doi:10.1109/tassp.1986.1164815 · Cited by 563
Noninvasive detection of broken rotor bars in operating induction motors
Kliman, G. B., Koegl, R. A., Stein, J., Endicott, R. D., & Madden, M. W. (1988) · IEEE Transactions on Energy Conversion · doi:10.1109/60.9364 · Cited by 525
AI techniques in induction machines diagnosis including the speed ripple effect
Filippetti, F., Franceschini, G., Tassoni, C., & Vas, P. (1998) · IEEE Transactions on Industry Applications · doi:10.1109/28.658729 · Cited by 442
Detection and location of interturn short circuits in the stator windings of operating motors
Penman, J., Sedding, H. G., Lloyd, B. A., & Fink, W. T. (1994) · IEEE Transactions on Energy Conversion · doi:10.1109/60.368345 · Cited by 394
Benbouzid, M. E. H., Vieira, M., & Theys, C. (1999) · IEEE Transactions on Power Electronics · doi:10.1109/63.737588 · Cited by 378
The Digital signal processing handbook
(1998) · Choice Reviews Online · doi:10.5860/choice.36-0368 · Cited by 365
Henao, H., Demian, C., & Capolino, G.-A. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.816531 · Cited by 361
Self-citationFault Detection in a Multistage Gearbox by Demodulation of Motor Current Waveform
Mohanty, A. R., & Kar, C. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.878303 · Cited by 235
Statistical analysis of MUSIC and subspace rotation estimates of sinusoidal frequencies
Stoica, P., & Soderstrom, T. (1991) · IEEE Transactions on Signal Processing · doi:10.1109/78.91154 · Cited by 206
Ayhan, B., Chow, M.-Y., & Song, M.-H. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.878301 · Cited by 182
Monitoring of induction Machines by maximum covariance method for frequency tracking
Bellini, A., Franceschini, G., & Tassoni, C. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.861320 · Cited by 80
Analysis Techniques for Detection of IM Broken Rotor Bars After Supply Disconnection
Cupertino, F., deVanna, E., Salvatore, L., et al. (2004) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2004.824432 · Cited by 53
Detection of Induction Machines Rotor Faults at Standstill Using Signals Injection
Demian, C., Mabwe, A. M., Henao, H., et al. (2004) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2004.836170 · Cited by 50
Self-citation
Cited by
Advances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140
Self-citationA Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2090839 · Cited by 706
A survey of condition monitoring and protection methods for medium voltage induction motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2009) · 2009 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2009.5316083 · Cited by 524
Fault Detection in Induction Machines Using Power Spectral Density in Wavelet Decomposition
Cusid�Cusido, J., Romeral, L., Ortega, J. A., Rosero, J. A., & Garc�aGarcia Espinosa, A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.911960 · Cited by 512
Grubic, S., Aller, J. M., Lu, B., & Habetler, T. G. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2004665 · Cited by 490
Metadata
- Authors
- Kia, S. H., Henao, H., & Capolino, G.-A.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2007-08
- Volume
- 54
- Issue
- 4
- Pages
- 2305-2314
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2134954724
- Cited by
- 325
- References
- 17
- FWCI
- 35.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.