The DOI matches its Crossref record.
Boost Converter With Coupled Inductors and Buck–Boost Type of Active Clamp
Abstract
This paper proposes a boost converter with coupled inductors and a buck-boost type of active clamp. In the converter, the active-clamp circuit is used to eliminate the voltage spike that is induced by the trapped energy in the leakage inductor of the coupled inductors. The active switch in the converter can still sustain a proper duty ratio even under high step-up applications, reducing voltage and current stresses significantly. Moreover, since both main and auxiliary switches can be turned on with zero-voltage switching, switching loss can be reduced, and conversion efficiency therefore can be improved significantly. A 200 W prototype of the proposed boost converter was built, from which experiment results have shown that efficiency can reach as high as 92% and surge can be suppressed effectively. It is relatively feasible for low-input-voltage applications, such as fuel cell and battery power conversion.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Forouzesh, M., Siwakoti, Y. P., Gorji, S. A., Blaabjerg, F., & Lehman, B. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2652318 · Cited by 2,123
Review of Nonisolated High-Step-Up DC/DC Converters in Photovoltaic Grid-Connected Applications
Li, W., & He, X. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049715 · Cited by 1,423
Overview of High-Step-Up Coupled-Inductor Boost Converters
Liu, H., Hu, H., Wu, H., Xing, Y., & Batarseh, I. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2532930 · Cited by 432
Nonisolated High Gain DC–DC Converter for DC Microgrids
Lakshmi, M., & Hemamalini, S. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2733463 · Cited by 341
A novel non-isolated bidirectional DC-DC converter for high voltage gain applications
Reddy, S. R. P., Naik, B. S., & Umanand, L. (2017) · 2017 IEEE PES Asia-Pacific Power and Energy Engineering Conference (APPEEC) · doi:10.1109/appeec.2017.8308944 · Cited by 8
Metadata
- Authors
- Wu, T.-F., Lai, Y.-S., Hung, J.-C., & Chen, Y.-M.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2008-01
- Volume
- 55
- Issue
- 1
- Pages
- 154-162
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2489584870
- Cited by
- 425
- References
- 0
- FWCI
- 20.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Boost Converter With Coupled Inductors and Buck–Boost Type of Active Clamp. https://app.cochat.ai/papers/10.1109/tie.2007.903925
- The paper
- Wu, T.-F., Lai, Y.-S., Hung, J.-C., & Chen, Y.-M. (2008). Boost Converter With Coupled Inductors and Buck–Boost Type of Active Clamp. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2007.903925
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
